SUR-RON

A rear shock mudguard designed to shield the Sur-Ron Light Bee rear shock and swingarm area from mud, water and debris. Constructed from flexible rubber with a black finish for straightforward, tool-light installation. Features Protects the rear shock from mud, water and debris Flexible rubber for impact and heat resistance Quick installation with no drilling or cutting required Discreet black appearance Supplied brand new Installation instructions not included Specifications Type: Rear shock mudguard / splash guard Material: Rubber Colour: Black Location: Rear (shock/swingarm area) Package contents: 1 × rear cushion fender (mudguard) Vehicle Fitments SURRON LIGHT BEE X SURRON LIGHT BEE S

Read more less

A lightweight and robust aluminium alloy footpeg support brace engineered to prevent pedal bracket breakage during even minor crashes. It offers a durable and corrosion-resistant solution specifically designed for Sur-Ron Light BeeX bikes, reinforcing the footpeg assembly for greater longevity. Features Constructed of high-quality aluminium alloy, offering both light weight and strong structural support Enhances reinforcement of footpeg brackets, minimising risk of bending or breaking on impact Simple and rapid installation using existing mounting points—no professional tools required Specifications Size approximately 21×1.9cm Material: aluminium alloy Vehicle Fitments Designed to fit Sur-Ron LightBeeX (and compatible with Models S / X160 / X260)

Read more less

This primary drive belt is a synchronous rubber belt for the Light Bee/X-type mid-drive, specified as Gates model 560-8MGT4-16 and supplied as a single replacement part for the primary transmission. Features Rubber synchronous timing belt construction High torque transmission and stable power delivery Suited to electric off-road use Direct replacement primary belt Single piece supplied Specifications Model: 560-8MGT4-16 Tooth pitch: 8 mm Nominal length: 560 mm Width: 15 mm Material: Rubber Brand: Gates Product weight: 0.048 kg Package contents: 1 × primary drive belt Vehicle Fitments SURRON LIGHT BEE X SEGWAY X160 SEGWAY X260

Read more less

A machined aluminium thru-axle nut set designed for use with DNM Volcano front forks, tailored to fit the Sur-Ron Light Bee or Light Bee X and Segway X160/X260 models, offering durable and lightweight functionality. Features Thru-axle nut and bolt set specifically compatible with DNM Volcano fork only Machined from aluminium for durability and lightweight performance Supplied as a pair of nuts (price quoted is for one pair) Facilitates secure attachment of the front wheel axle to DNM Volcano forks Specifications Material: Aluminium Size (individual nut): approximately 2.5 cm × 1.9 cm Weight (pair): approximately 0.014 kg (per nut listed as 0.014 kg) Vehicle Fitments Sur-Ron Light Bee (including Light Bee X) Segway X-Series: X160 and X260

Read more less

A solid rear axle with a 12mm diameter and 180mm length, featuring an 18mm threaded section and installed using a 6mm Allen wrench. Branded Sur-Ron, this is the standard version compatible with the Sur-Ron Light Bee series and related Segway models. Features Rear axle with a 12mm diameter and 180mm overall length Thread length of 18mm Requires a 6mm Allen wrench for installation Ordinary, standard-grade version Specifications Diameter: 12mm Length: 180mm Thread length: 18mm Tool interface: 6mm Allen hex Vehicle Fitments Sur-Ron Light Bee Sur-Ron Light Bee X Segway X160 Segway X260

Read more less

This lightweight aluminium bottom axis jackshaft axle offers a precise fit and reliable performance for SUR-RON drivetrains. Features Lightweight design (0.15 kg) for improved manoeuvrability High-precision machining ensures smooth alignment and low friction 10 mm diameter shaft with an overall length of 197 mm 18 mm threaded portion for secure fastening Requires 5 mm Allen wrench (hex key) for installation Brand: Sur-Ron — genuine part for direct fit Specifications Weight: 0.15 kg Shaft diameter: 10 mm Total length: 197 mm Thread length: 18 mm Allen wrench size: 5 mm Vehicle Fitments Suits Sur-Ron Light Bee X / Light Bee models (jackshaft or swingarm axle application)

Read more less

This replacement axle shaft and nut assembly is designed for use with DNM and KKE front suspension forks on Sur-Ron Light Bee models and compatible electric off-road bikes. Features Includes a single cylinder shaft (axle) and matching nut for front fork application Suitable as end cap hardware for DNM or KKE fork systems Compatible with Sur-Ron Light Bee X / Light Bee S, Talaria Sting MX3, Sting R MX4, Segway X160/X260 models Sold individually; order two units if both sides are required Specifications Material: typically steel or aluminium alloy (brand DNM/KKE) Length approximately 178mm × diameter approx. 25mm (17.8×2.5cm) Weight around 0.096kg Vehicle Fitments Sur-Ron Light Bee X and Light Bee S (DNM or KKE fork versions) Talaria Sting MX3 and Sting R MX4 with compatible fork systems Segway X160 and X260 models using DNM or KKE forks

Read more less

This stainless steel engine and chassis protection cover shields the lower motor area and frame from impacts and debris on off-road terrain. Designed for the Light Bee platform, it uses a cut-out pattern to control weight and allow airflow, and installs with standard hand tools Features Protective guard for motor base and lower frame against stones, branches and ground strikes. Cut-out design to reduce weight and aid heat dissipation. Stainless steel construction for strength and corrosion resistance Simple bolt-on fitment; no special tools required Specifications Material: Stainless steel. Colour: Black (typical variant). Approximate item size: 17.7 × 29 × 15 cm (manufacturer listing). Position: Lower engine / sump area. Package contents: 1 × chassis protection cover. Vehicle Fitments SURRON LIGHT BEE S SURRON LIGHT BEE X

Read more less

This motocross seat cushion is a direct replacement for the Light Bee platform, featuring a waterproof leather cover and integrated logo. The seat uses a 6 mm thickened cushion layer for rider comfort and installs with standard hardware. Features Direct replacement seat cushion with Sur-Ron logo Waterproof leather cover 6 mm thickened cushioning layer Durable construction for daily off-road use Straightforward installation Specifications Item type: Motorcycle seat cushion Brand: Sur-Ron Material: Leather (waterproof cover) Colour: As pictured Size (approx.): 44 × 16.8 × 13.5 cm Package contents: 1 × motorcycle seat Vehicle Fitments SURRON LIGHT BEE S SURRON LIGHT BEE X

Read more less

This side support provides a stable parking solution for Light Bee models. Constructed from metal with a black finish, it is designed for straightforward installation and reliable everyday use. Features Metal construction for durability Stable support for parking the motorcycle Direct-fit design for Light Bee models Simple installation Specifications Name/Type: Motorcycle side support Material: Metal Colour: Black Package contents: 1 × motorcycle side support Vehicle Fitments SURRON LIGHT BEE S SURRON LIGHT BEE X

Read more less

This side stand (parking rack assembly) provides stable support when parking the motorcycle. Constructed from iron with a black finish, it is designed for straightforward installation on the Light Bee platform. Features Sturdy steel construction for durability Provides stable parking support Clean, unobtrusive appearance Simple, bolt-on installation Specifications Type: Side stand / parking rack assembly / footrest bracket Material: steel Colour: Black (as pictured) Package contents: 1 × bike stand (as pictured) Vehicle Fitments SURRON LIGHT BEE S SURRON LIGHT BEE X

Read more less

This component functions as the motor hall sensor assembly for the Sur-Ron Light Bee and Light BeeX, responsible for monitoring rotor position and ensuring smooth motor commutation. Features Detects rotor position via three hall-effect sensors under a magnet-embedded disk, enabling precise motor timing Plug-and-play replacement compatible with OEM Sur-Ron motors Helps resolve issues such as stuttering, reverse operation or startup failure due to hall sensor faults Specifications Sensor disk diameter approximately 25.5cm, cable length approx. 6cm Standard connector: 6-pin plug linking controller power +5V, ground, and three signal wires Vehicle Fitments Light Bee Light BeeX

Read more less

This tilt-or-tip-over sensor is the OEM replacement switch for Light Bee models. It detects when the bike tilts beyond a safe angle and cuts motor power instantly, then allows restart once reset. Features Cuts motor power when the bike tilts over approximately 65° Plug-and-play installation for Sur-Ron Light Bee / Light BeeX Easy installation: connects to existing harness under the controller Specifications Tilt angle threshold: approx. 65° before motor cutoff Body dimensions around 8×1.6×1.6inches (approx. 203×41×41mm) Installed via frame-mount plug under controller housing Vehicle Fitments Light Bee Light BeeX

Read more less

This diagnostic adapter cable provides a simple and reliable method to access the fault detection line on compatible Sur-Ron bikes, enabling precise fault identification. Features Designed for plug-and-play connection to the fault detection line of the bike Includes a red indicator light on the wiring harness to show fault signal status Suitable for both Light BeeX and Light BeeS models Allows monitoring of error codes and fault signals for electrical troubleshooting Specifications Cable with 6-pin connector interface Red fault-status LED integrated into wiring Durable insulated wiring suitable for off-road use Vehicle Fitments Light BeeX Light BeeS

Read more less

This complete main wiring harness is designed for the road-legal Sur-Ron Light Bee L1E electrical configuration, providing the primary connections for the headlight, indicators, display, switches, controls and other associated electrical components. It is intended to match the factory L1E wiring layout and differs from the simpler off-road Light Bee loom, which does not provide the complete road-legal electrical connections. The separate rear tail light connecting line is not included and must be obtained separately where required. Features Complete main wiring loom for the factory road-legal L1E electrical system Provides connections for lighting, indicators, display, switches and 12V converter components Direct-fit OEM-style plug connections matching the L1E wiring layout Off-road Light Bee wiring looms are not directly interchangeable without modification Rear tail light connecting line / sub-loom is not included Specifications Main harness length: 1210 mm Copper electrical conductors PVC insulation and sleeving Cross-Reference OEM Part Numbers Main wiring harness OEM part number: 24100-YQ2B-0100 Vehicle Fitments Sur-Ron Light Bee X / LBX – L1E road-legal specification Segway X160 Segway X260 Vehicle Fitments SUR-RON Light Bee L1E (2024)

Read more less

Sine Wave Controller for the Sur-Ron X (LBX) offers significantly enhanced performance over the stock unit, with smoother power delivery, regenerative coasting, and plug-and-play compatibility. Features Sine wave control for smoother and quieter operation than square-wave controllers Approximately 20% more torque and ~10% increase in top speed over stock controller Regenerative braking activated at around 8mph, with option to disable regen via eco mode Plug-and-play installation compatible with newer motors (post-February 2018 models) Specifications Controller type: Sine Wave Overall efficiency: approx.98.5% Dimensions: 240mm × 110mm × 50mm Package weight: 3kg (as provided) Power modes: Eco and Sport Vehicle Fitments Compatible with Sur-Ron models equipped with newer motor (Post-Feb 2018 P/N motor version) Not compatible with older motor version P/N: 11100-YQ2A-0100 

Read more less

This OEM replacement motor is designed specifically for the Sur-Ron Light BeeX (up to 2024 model year). It matches the original factory part to ensure direct compatibility with the Light Bee X sine-wave controller and delivers the same power output as on the standard production bike Features Factory-original Sur-Ron motor intended for Light BeeX models Direct replacement: compatible with Light BeeX sine-wave controller Hardware such as mounting bolts or connectors not included Same torque and performance profile as stock motor Specifications Rated power: 3kW Peak power: 6kW Rated voltage: 60V Maximum RPM: approximately 5100rpm Maximum torque: 250N·m Motor protection rating: IP55 Vehicle Fitments Sur-Ron Light BeeX models (up to and including 2024 model year)

Read more less

Hydraulic rear foot brake master cylinder kit for relocating rear brake control to the right foot while retaining a handbrake option where required. CNC-machined from 6061-T6 aluminium with an anodised black finish; approximate weight 850 g / 1.9 lb. Compatible with Sur-Ron Light Bee X, Segway X160/X260 and Talaria Sting models Features Hydraulic master cylinder activates the rear brake (replaces the hand-operated master cylinder) Allows braking by foot while keeping the handbrake for riders accustomed to this layout. Made from aluminium; strong and lightweight for long-lasting use. CNC machined; high precision and reliable quality are absolutely guaranteed. Anodised surface in black. You will receive all the parts listed in the pictures! Specifications Condition: 100% new, high quality. Colour: black. Weight: 850 g / 1.9 lb Material: 6061 T6 aluminium Surface: anodised. Vehicle Fitments SURRON LIGHT BEE X SEGWAY X160 / X260 TALARIA STING / STING R

Read more less

This motor drive wheel is a genuine replacement component for the Sur-Ron Light Bee series and compatible Segway electric off-road bikes. Designed for durability and reliability, it serves as the first-level drive wheel within the motor system, ensuring proper power transfer. Manufactured to original specifications, it offers a precise fit and easy installation. Features Brand new original part Reliable and durable construction Direct replacement part Easy to install Supplied as a single piece Specifications Type: Motor drive wheel Colour: Black Quantity: 1 piece Weight: 173 g Vehicle Fitments SURRON Light Bee X SURRON Light Bee S Segway X260

Read more less

A comprehensive frame maintenance bearing kit for the Sur-Ron Light Bee platform, supplying replacement sealed ball bearings, roller bearings, bushings, sleeves and nylon/plastic gaskets to restore smooth operation at the frame, swingarm and linkage pivots. Features Complete kit for servicing frame, swingarm and linkage pivot points Includes ball bearings, roller bearings, bushings, protective case/sleeves, plastic gaskets and a flat fork bearing Sealed deep-groove bearings help resist dirt and moisture ingress Designed specifically for the Sur-Ron Light Bee chassis for correct fit. Specifications Kit contents: 4 × sealed ball bearings (2 × frame, 2 × swingarm) 2 × frame sleeves 2 × roller bearings 2 × bushings 4 × nylon washers. Vehicle Fitments SURRON LIGHT BEE X

Read more less

This drive shaft axis bottom sleeve (jackshaft centre sleeve) replaces the stock centre sleeve on the Light Bee drivetrain to support the jackshaft and maintain alignment for reliable power transfer. Supplied here in black. Features Direct replacement centre/jackshaft sleeve (axis bottom sleeve) Supports the jackshaft to maintain drivetrain stability and alignment Designed to withstand the high pressures and loads of daily riding Standard mounting interface for straightforward bolt-on installation Available in multiple colours; this listing is for the black variant Specifications Colour: Black Size: Approx. 13.2 × 6.0 cm Weight: Approx. 506.5 g Material: Aluminium alloy Position: Centre/jackshaft (bottom axis) Vehicle Fitments SUR-RON LIGHT BEE X SUR-RON LIGHT BEE S SEGWAY X160 SEGWAY X260

Read more less