Buzzetti

M30 x 1.00 R/H. FLYWHEEL PULLER with internal thread. Tips on use. - Make sure the flywheel thread is clean of dirt and not damaged before screwing the puller in. - Use copper grease on the puller threads, for long life. - Make sure the puller is fully screwed into the flywheel. - After tightening use a hammer on the centre and tap to jolt free [not always need]. - If using old flywheel pullers make sure the threads are in good condition before use to avoid damage to flywheel. Part No. 00-486 (radhouse.co.uk) Cross reference numbers.08-0386, YM-04141. BUZZETTI 2012 PSYCHIC MX-12285

Read more less

30mm x 1.00 Right Hand fly wheel puller Extractor. Yamaha WRF250 03-12, WRF450 2003. (type flywheel extractor Lambretta Motoplatt-ignition) Cross reference numbers. Replaces OEM tool YM04141, BUZZUTI 2012 also fits Lambretta LI 125 (series 1) LI 150 (series 1) LI 125 (series 2) LI 150 (series 2) TV 175 (series 2) DL/GP 125 DL/GP 150 DL/GP 200 LI 125 (series 3) LI 150 (series 3) LI 125 Special LI 150 Special X 150 Special X 200 Special Part No. 00-486_BUZ (radhouse.co.uk)

Read more less

Part No. 00-132 (radhouse.co.uk)

Read more less

The Buzzetti 5219 flywheel puller is a threaded extractor for removing compatible motorcycle and scooter flywheels during ignition-system servicing. It engages a matching flywheel thread so the flywheel can be drawn off for inspection or repair. Features Listed for Bosch, Ducati and Motoplat flywheel applications. Specifications Thread: M22 × 1.50 mm, right-hand Cross-Reference OEM Part Numbers Buzzetti: 5219 Vehicle Fitments Beta Rev80 trials bike — 80 cc Beta Evo trials bike — 80 cc Piaggio NGR MC2 50 2T LC — up to 1997 Piaggio NRG 50 2T LC Piaggio NRG Extreme 50 2T Piaggio NRG Extreme 50 2T LC Piaggio NRG MC2 50 2T LC — from 1998

Read more less

Part No. 00-129_B (radhouse.co.uk) FLY WHEEL EXTRACTOR M28 x 1.25mm Right Hand Thread. A flywheel puller with a thread diameter of 28mm and a thread pitch of 1.25mm. ATK rotax with motoplat.

Read more less

Flywheel Extractor M24 x 1.00 RH Part No. 00-128.BUZ [Old No. 00-128.MP] (radhouse.co.uk)

Read more less

Part No. 00-127_B (radhouse.co.uk) MP45 Husqvarna Flywheel Puller 28mm x 1.5-RH-Internal Male RepairManual.com is proud to offer this Husqvarna Flywheel Puller 28mm x 1.5-RH-Internal Male for sale. Flywheel Puller for Husqvarna 'E' Series Models, 350cc and 610cc.

Read more less

Flywheel Puller 30mm x 1.5-Right Hand Internal Male. High quality Stubblefield flywheel puller for most ATK ROTAX models using 30mm x 1.5 Right Hand Internal male threads. 1999 ATK 250LQ 2000 ATK 260 2000 ATK 500 DT Dirtrackers 2000 ATK 600 DT Dirtrackers 2001 ATK 500 DT Dirtrackers2001 ATK 600 DT Dirtrackers 2002 ATK 500 DT Dirtrackers 2002 ATK 500 Super Motard 2002 ATK 600 DT Dirtrackers 2002 ATK 600 Super Motard Part No. 00-126_B (radhouse.co.uk) Buzzetti 5247 Made in Italy

Read more less

Rotor Magneto Flywheel Extractor Puller 22mm x 1.00 Right Hand. BUZZETTI 5218 KTM SX65 / SX85 all, KTM TC65 / TC85 all, Lambretta 125 E/F SCOOTER, - Professional quality workshop tools. - Carbon steel, Black Oxide finish. - BUZZETTI products are a high quality. Tools, Accessories and Part all - Made in Italy. Tips on use. - Make sure the flywheel thread is clean of dirt and not damaged before screwing the puller in. - Use copper grease on the puller threads, for long life. - Make sure the puller is fully screwed into the flywheel. - After tightening use a hammer on the centre and tap to jolt free [not always need]. - If using old flywheel pullers make sure the threads are in good condition before use to avoid damage to flywheel. Part No. 00-125 (radhouse.co.uk)

Read more less

The Buzzetti flywheel puller is a threaded extractor for removing a flywheel during servicing or repair. It engages a matching flywheel thread to draw the flywheel off its mounting. Specifications Thread size: M26 × 1.00 Thread direction: right-hand Cross-Reference OEM Part Numbers Buzzetti 2019 AT2019

Read more less

This bead holding tyre changing tool is designed to simplify the process of changing off-road motorcycle tyres. Made from durable steel, it securely holds the bead in place during installation, eliminating the need to manually keep the bead down. The tool hooks over the spoke and sits inside the rim to assist with easy and efficient tyre fitting. No longer need a buddy to help change a tyre! Features Simplifies off-road tyre changing Holds the bead down for easier installation Hooks over the spoke and sits inside the rim Reduces effort and improves control during tyre changes Constructed from steel for durability Specifications Material: Steel ???????Package Includes 1 x Bead Holding Tool

Read more less

FLYWHEEL PULLER M33 - 33mm x 1.50mm Right hand tread. Applications:Husqvarna/Cagiva: All models with ignition point systems, 1978 and later, large flywheel motoplat ignitions C.D.I.Bultaco: Femsa magneto, most late 1960’s ”“ 1970’s, Pursang Mx, El Tigre, Frontera, Bandito, Matador, Metrella, Sherpa series S125 and 200Mx, Sherpa “T”Others: Ossa Mx, Montesa Mx, Zundap, Sachs, Pento and Puch, Many European Mo-Peds and Scooters. Used for removal of the flywheel or rotor if applicable. Premium quality high carbon steel. Heat treated for strength and durability. Durable hot black oxide finish. BUZZETTI products are a high quality. Tools, Accessories and Part all Tips on use. - Make sure the flywheel thread is clean of dirt and not damaged before screwing the puller in. - Use copper grease on the puller threads, for long life. - Make sure the puller is fully screwed into the flywheel. - After tightening use a hammer on the centre and tap to jolt free [not always need]. - If using old flywheel pullers make sure the threads are in good condition before use to avoid damage to flywheel. Part No. 00-106_B (radhouse.co.uk)

Read more less

FLYWHEEL PULLER 28mm X 1.00 RIGHT HAND BUZZETTI 2022 Used for removal of the flywheel or rotor. Premium quality high carbon steel S45C. Heat treated for strength and durability. Durable hot black oxide finish. 28mm x 1.0P RH External Thread. Tips on use. - Make sure the flywheel thread is clean of dirt and not damaged before screwing the puller in. - Use copper grease on the puller threads, for long life. - Make sure the puller is fully screwed into the flywheel. - After tightening use a hammer on the centre and tap to jolt free [not always need]. - If using old flywheel pullers make sure the threads are in good condition before use to avoid damage to flywheel. Part No. 00-105.B (radhouse.co.uk)

Read more less

FLYWHEEL PULLER DOUBLE ENDED. BUZZETTI 5288 Description: M26x1.5mm / M27x1.25mm Both RH Compatible with Bosch / Motoplat / Ducati / MOTOPLAT / HUSQVARNA / MONTESA Features: BUZZETTI products are high-quality replacement parts and Made in Italy. Please see image before ordering to avoid mistakes. Tips on use: Ensure the flywheel thread is clean of dirt and not damaged before screwing the puller in. Use copper grease on the puller threads for long life. Make sure the puller is fully screwed into the flywheel. After tightening, use a hammer on the center and tap to jolt free (not always needed). If using old flywheel pullers, make sure the threads are in good condition before use to avoid damage to the flywheel.

Read more less

FLYWHEEL PULLER M26 RH BUZZETTI 5234 Description: 26mm x 1.50 RIGHT HAND External flywheel enduro. Compatible with Bosch / Motoplat / Ducati / SEP. Tips on use: Ensure the flywheel thread is clean of dirt and not damaged before screwing the puller in. Use copper grease on the puller threads for long life. Make sure the puller is fully screwed into the flywheel. After tightening, use a hammer on the center and tap to jolt free (not always needed). If using old flywheel pullers, make sure the threads are in good condition before use to avoid damage to the flywheel.

Read more less

27mm x 1.25 Right Hand, Flywheel extractor magneto Puller. BUZZETTI 5239 Motoplat small internal rota MX. Ducati STEERING ROPE FOR DERBI 50 GPR / MVT Tips on use. - Make sure the flywheel thread is clean of dirt and not damaged before screwing the puller in. - Use copper grease on the puller threads, for long life. - Make sure the puller is fully screwed into the flywheel. - After tightening use a hammer on the centre and tap to jolt free [not always need]. - If using old flywheel pullers make sure the threads are in good condition before use to avoid damage to flywheel. Part No. 00-102 (radhouse.co.uk)

Read more less

FLYWHEEL PULLER / EXTRACTOR 27mm x 1.00 LEFT HAND. BUZZETTI 5250 Honda CRF50F 04-11, XR50R 00-03, CRF70F 04-11, CR80 83-02, CRF80F 04-11, XR80 79-03, CR85 03-08, CRF100F 04-12, XR100/R 81-03, CR250R 1981, CR500 84-01. Kawasaki KDX 03-06, KX60 83-03, KX65 00-12, KDX80 80-88, KX80 83-85, KX80/85/100 98-12, KX125 93-05, KDX200 97-06, KDX220 97-05, KDX 91-94, KX250 92-07, KX500 84-85, KX500 92-04. KTM 65SX 99-12, 85SX 04-10, 85XC 2008, 105SX 06-11, 105XC 08-12, 125EXC 98-02, 125SX 98-11, 144SX 2008, 150SX 09-10, 150XC 10-11, 200EXC 98-05, 200MXC 98-02, 200XC 06-09, 200XCW 06- 12, 250EXC 00-05, 250MXC 00-02, 250SX 00-12, 250XC 06-07, XC250 06-07, 300EXC/MXC 98-05, 300XC/XCW 06-07. Suzuki RM60 2003, RM65 03-05, DR100 83-90, RM100 2003, DR125 82-88, DRZ125/L 03-09, RM125 96-08, DR200 86-88, RM250 89-08, RMX250 89-98. Yamaha To many to list. Tips on use. - Make sure the flywheel thread is clean of dirt and not damaged before screwing the puller in. - Use copper grease on the puller threads, for long life. - Make sure the puller is fully screwed into the flywheel. - After tightening use a hammer on the centre and tap to jolt free [not always need]. - If using old flywheel pullers make sure the threads are in good condition before use to avoid damage to flywheel. Part No. 00-101_B (radhouse.co.uk) 00-101_B

Read more less

FLYWHEEL PULLER M19 BUZZETTI 5209 19mm x 1.00 Right Hand, Flywheel Exractor Magneto puller. LEM, KTM, Italjet, PW50 and lots of small engines. Tips on use. - Make sure the flywheel thread is clean of dirt and not damaged before screwing the puller in. - Use copper grease on the puller threads, for long life. - Make sure the puller is fully screwed into the flywheel. - After tightening use a hammer on the centre and tap to jolt free [not always need]. - If using old flywheel pullers make sure the threads are in good condition before use to avoid damage to flywheel. Part No. 00-099_B (radhouse.co.uk)

Read more less

FLYWHEEL PULLER EXTRACTOR 18mm x 1.50mm RH. BUZZETTI 5208 YAMAHA MX CROSS YZ125/250, Used for removal of the flywheel or rotor if applicable. Premium quality high carbon steel Heat treated for strength and durability Durable hot black oxide finish Part No. 00-096_B (radhouse.co.uk)Cross reference numbers. BUZZETTI 5208, UP-12919 Tips on use. - Make sure the flywheel thread is clean of dirt and not damaged before screwing the puller in. - Use copper grease on the puller threads, for long life. - Make sure the puller is fully screwed into the flywheel. - After tightening use a hammer on the centre and tap to jolt free [not always need]. - If using old flywheel pullers make sure the threads are in good condition before use to avoid damage to flywheel.

Read more less

ENGINE TIMING TOOL 14mm BUZZETTI 4936 - Suitable for 2 stroke engines, this precision timing tool has micrometer adjustment for maximum accuracy. - Micrometer Thimble Instrument to adjust your inner rotor ignition. - Buzzetti offer their micrometer with 0.1mm steps, which allows for finding the TDC of the piston and adjusting the ignition accordingly. - It is of course a bit more fiddly then with a TDC gauge, but on the other hand it is available at a really good price.- Buzzetti products are a high quality Tools, Accessories and Part and Part No. 00-043 (radhouse.co.uk)

Read more less

Variator Locking Tool [162mm Centers]PEUGEOT TwEET 125/150, SYM 125/150 4t - SYMPHONY E ALTRI / ET OUTRES / ANd OThERS BUZZETTI 5520 Made in Italy. Peugeot Tweet 125,Peugeot Tweet 150,Peugeot Tweet 50 4T,Sym Euro MX 125,Sym Fiddle II 125,Sym Fiddle II 150,Sym Jet 4 125,Sym Super Duke 150,Sym Symphony 125,Sym Symphony 150,Sym Symply 125 If you do not have access to an impact gun, this tool will be critical if you want to remove your front variator during belt service, or a roller weight change. Delivered exactly as seen in the photo.

Read more less

The Buzzetti 5509 Variator Locking Tool is designed to hold the variator securely in place for safe removal and installation during belt service or roller weight changes on a wide range of Peugeot and Sym 50cc 4-stroke air-cooled scooters. With 157 mm centre spacing, this Italian-made tool is essential when an impact gun is not available. Features Allows removal of the front variator without the use of an impact gun Essential for belt service and roller weight replacement 157 mm centre spacing Delivered as shown in product image Made in Italy Specifications Type: Variator locking tool Centre spacing: 157 mm Cross-Reference OEM Part Numbers Not provided Vehicle Fitments Peugeot Ludix Pro 50 AIR 4T (2007–2014) Peugeot New Vivacity 25km/h AIR 4T (2012 onward) Peugeot New Vivacity 50 AIR 4T (2008 onward) Peugeot Speedfight 3 25km/h AIR 4T (2010–2014) Peugeot Speedfight 3 50 AIR 4T (2010–2014) Peugeot Speedfight 4 25km/h AIR 4T (2015 onward) Peugeot Speedfight 4 50 AIR 4T (2015 onward) Peugeot Streetzone 25km/h AIR 4T (2014 onward) Peugeot Streetzone 50 AIR 4T (2014 onward) Peugeot Tweet 25km/h AIR 4T (2010 onward) Peugeot Tweet 50 AIR 4T (2010 onward) Sym Allo 50 AIR 4T (2010 onward) Sym Allo GT 25km/h AIR 4T (2013 onward) Sym Allo GT 50 AIR 4T (2013 onward) Sym Cello 25km/h AIR 4T (2010–2015) Sym Cello 50 AIR 4T (2010–2015) Sym Fiddle II 25km/h AIR 4T (2009–2014) Sym Fiddle II 50 AIR 4T (2009–2014) Sym Fiddle III 25km/h AIR 4T (2014 onward) Sym Fiddle III 50 AIR 4T (2014 onward) Sym Jet 4 25km/h AIR 4T (2010–2012) Sym Jet 4 50 AIR 4T (2010–2015) Sym Mio 25km/h AIR 4T (2009–2010) Sym Mio 50 AIR 4T (2005–2008) Sym Mio 50 AIR 4T (2009–2015) Sym Orbit II 25km/h AIR 4T (2009) Sym Orbit II 50 AIR 4T (2009–2015) Sym Symphony 25km/h AIR 4T (2009–2014) Sym Symphony 50 AIR 4T (2009–2014) Sym Symphony Sport 50 AIR 4T (2010–2014) Sym Symphony SR 25km/h AIR 4T (2011–2014) Sym Symphony SR 50 AIR 4T (2011–2014) Sym Symphony ST 25km/h AIR 4T E3 (2015) Sym Symphony ST 50 AIR 4T (2015–2016) Sym Symply 50 AIR 4T (2014 onward) Sym X'Pro 25km/h AIR 4T (2014) Sym X'Pro 50 AIR 4T (2014)

Read more less

The Buzzetti 5514 Variator Locking Tool is designed to securely hold the front variator on select Yamaha and MBK 4-stroke scooters, allowing for safe removal during belt service or roller weight replacement. With a 210 mm diameter, this tool is especially useful when an impact gun is not available, ensuring precise and damage-free maintenance. Features Allows removal of the front variator without the use of an impact gun Essential for belt service and roller weight replacement Delivered as shown in product image Specifications Type: Variator locking tool Diameter: 210 mm Vehicle Fitments MBK Oceo 125i H2O 4T E3 (2012–2014) MBK Oceo 150i H2O 4T E3 (2014) MBK Skyliner S 125i H2O 4T (2014) Yamaha Majesty S 125i H2O 4T (2014) Yamaha S-Max 125i H2O 4T (2014–2015) Yamaha S-Max 160i H2O 4T (2014–2015) Yamaha Xenter 125i H2O 4T E3 (2012–2016) Yamaha Xenter 125i H2O 4T E4 (2017 onward) Yamaha Xenter 150i H2O 4T E3 (2014–2016)

Read more less