CA TECH USA

These trailing arms are designed for the Can-Am Maverick R 2-seater as a heavy-duty suspension upgrade and reinforced replacement for OEM trailing arms. Revised from a previous generation design, they feature additional gusseting in high-impact areas and increased overall structural strength to address common OEM weak points and help prevent failure. Manufactured for precise fitment, they also provide increased ground clearance for improved underbody clearance in demanding conditions. Features Heavy-duty boxed trailing arms for the Can-Am Maverick R 2-seater Revised and reinforced design based on a previous generation Additional gusseting in high-impact areas Increased overall structural strength to help prevent failure Designed to address common weak points found on OEM arms Provides 3 inches more ground clearance than stock arms Intended for precise fitment Suitable for suspension upgrade applications Specifications Laser cut construction Manufactured from 11-gauge steel CNC bent for fitment Vehicle Fitments Can-Am Maverick R 2-seater only

Read more less

The CA Tech USA CA-197-OUTER outer tie rod kit is a replacement steering linkage assembly for compatible Can-Am Maverick R models. Supplied as the outer tie rod end only, it provides a high-strength steering connection with corrosion-resistant spacer components for off-road applications. Features Outer tie rod end assembly only Provides increased strength at the outer steering connection Corrosion-resistant spacer design Specifications Main tie rod body material: 7075 aluminium Inner steering rack flag material: 7075 aluminium Outer tie rod end material: 4140 chromoly steel Outer joint: FK Uniball Inner joint: FK Heim joint Misalignment spacer material: 304 stainless steel Cross-Reference OEM Part Numbers CA-197-OUTER Vehicle Fitments Can-Am Maverick R: 2024–2026 Can-Am Maverick R XRC: 2026

Read more less

This tie rod kit is designed for the 2024-2025 Can-Am Maverick R as a high-strength steering upgrade developed through extensive testing in race environments. It is engineered for durability and compatibility, with inner and outer tie rod components that retain the same thread size and pitch as OEM parts, allowing compatibility with factory components when used independently. The complete kit variation includes the steering flag, inner joints, outer tie rod, uniballs, spacers, bolts and heims required for installation. Features Tie rod kit for the 2024-2025 Can-Am Maverick R Developed through extensive testing for high durability Proven in multiple race series including Ultra4, BITD and Champ Offroad Available in three variations Outer tie rod end variation includes outer tie rod end, FK uniball and stainless steel spacers Inner variation includes inner steering rack flag and inner tie rod Complete variation includes steering flag, inner joints, outer tie rod, uniballs, spacers, bolts and heims for full installation Inner steering rack flag converts the inner ball-and-socket joints to a heim joint arrangement to reduce wear Inner and outer tie rod components retain OEM thread size and pitch for compatibility with OEM components Suitable for race and high-demand applications Specifications 7075 aluminium main tie rod body 7075 inner steering rack flag 4140 chromoly outer tie rod end FK outer uniballs FK inner heim joints 304 stainless steel misalignment spacers Inner tie rod machined from 1.5-inch 7075 aluminium Finished outer diameter of inner tie rod: 1.31 inches Vehicle Fitments 2024-2025 Can-Am Maverick R

Read more less

This steering damper kit is designed for the 2024-2025 Can-Am Maverick R as a bolt-on steering control upgrade intended to reduce steering feedback, improve driver control and reduce fatigue in demanding conditions. Developed from race experience and professional driver feedback, the system uses a custom Fox damper shock and a three-piece clamp-style mounting bracket that fits either the OEM steering flag or an aftermarket steering flag and tie rod system. The kit mounts using OEM points without welding, drilling, tapping or other vehicle modification, and includes a coolant line bracket to prevent line contact with the damper. Features Steering damper kit for the 2024-2025 Can-Am Maverick R Designed to reduce steering feedback Helps reduce driver fatigue Helps prevent the steering wheel being pulled from the driver’s hands Three-piece clamp-style mounting bracket system Mounts to an OEM steering flag or an aftermarket steering flag and tie rod system 100% bolt-on installation No welding, drilling, tapping or modification required Mounts using OEM steering rack mounting points Designed to keep steering loads within the steering rack and bracket system Helps reduce energy transfer into the frame Helps reduce the risk of frame damage or weld fatigue over time Shock aligned parallel with the steering rack for linear force transfer Compact design keeps the shock body close to the steering rack Includes coolant line bracket to prevent contact with the steering damper Specifications Billet aluminium construction Custom-made Fox damper shock 10.9 metric mounting hardware Reduces steering wheel feedback by up to 60% Vehicle Fitments 2024-2025 Can-Am Maverick R

Read more less

These high-clearance radius rods are designed for the Can-Am Maverick R 2-seat model as a suspension upgrade intended to improve ground clearance, reduce flex under load and provide precise fitment. CNC-machined from billet aluminium, they are equipped with FK-bearing heim joints for smooth articulation and are supplied as a complete set with upper, middle and lower rods, sway bar relocation brackets, misalignment spacers and mounting hardware. Features High-clearance radius rods for the Can-Am Maverick R 2-seat Designed to improve ground clearance and help avoid trail obstacles Engineered to reduce flex under load Precision fitment Heim joints provide smooth articulation Supplied as a complete kit with required mounting hardware Includes sway bar relocation brackets Specifications CNC-machined construction Manufactured from 7075-T6 billet aluminium FK-bearing heim joints Vehicle Fitments 2024+ Can-Am Maverick R 2-seat

Read more less

These high-clearance boxed lower control arms are designed for the Can-Am Maverick R as a reinforced replacement that maintains OEM suspension geometry while providing increased underbody clearance and durability. Manufactured from structural steel, they are intended for improved strength and service life in demanding conditions. The arms include pre-installed machined bushings, brake line mounting holes and stainless steel attachment hardware. The uniball version includes uniball bearings and uniball pins. Brake line routing has been relocated to the top of the arm between the axle and control arm to help reduce the risk of damage. Features High-clearance boxed lower control arms for the Can-Am Maverick R Maintains OEM suspension geometry Provides increased ground clearance Designed for superior strength and longevity Machined bushings for smooth operation and long service life Bushings included and pre-installed Includes brake line mounting holes Includes stainless steel attachment hardware Brake line relocated to the top of the arm between the axle and control arm to help prevent damage Uniball version includes uniball bearings and uniball pins Specifications Manufactured from 11-gauge grade 50 structural steel Provides an additional 2.9 inches of ground clearance Bushings manufactured from UHMW material

Read more less

These CA Tech USA upper A arms are designed for Polaris RZR Pro R, Pro S and Turbo R applications. They replace the factory upper control arm arrangement and are intended to provide a stronger front suspension component. Features Upper control arms only Uniball configuration Required when used with CA Tech lower control arms Designed for strength and long service life Bushings provide smooth operation Specifications 11 gauge steel construction 3/16 inch steel construction High-grade UHMW machined bushings Cross-Reference OEM Part Numbers CA-151-BL-UB Vehicle Fitments Polaris RZR Pro R Polaris RZR Pro S Polaris RZR Turbo R

Read more less

These high-clearance lower control arms are designed for the Polaris Pro R, Pro S and Turbo R as a reinforced suspension upgrade that improves durability, increases ground clearance and removes the need for the OEM shock fork. Manufactured from heavy-duty steel, they are intended to provide improved strength and longevity in demanding conditions. The arms use machined UHMW bushes for smooth operation. These lower control arms must be used with matching upper control arms. Features High-clearance lower control arms for the Polaris Pro R, Pro S and Turbo R Designed for superior strength and longevity Provides increased ground clearance Uniball Version Specifications Provides an additional 4 inches of ground clearance Vehicle Fitments Polaris Turbo R Polaris Pro R Polaris Pro S

Read more less

These CA Tech USA high-clearance lower A arms are designed for Polaris RZR Pro R, Pro S and Turbo R applications. They replace the factory lower control arm arrangement and are intended to provide a stronger front suspension component with increased ground clearance and reduced reliance on the OEM shock fork. Eliminates the need for the OEM weak shock fork, includes eyelet lower shock mount. Must use CA Tech upper control arms when fitting CA Tech lower control arms Features Lower control arms only Uniball configuration Designed for improved obstacle clearance Designed for strength and long service life Bushings provide smooth operation Specifications 11 gauge steel construction 3/16 inch steel construction Additional ground clearance: 4 inches High-grade UHMW machined bushings Cross-Reference OEM Part Numbers CA-150-BL-UB Vehicle Fitments Polaris RZR Pro R Polaris RZR Pro S Polaris RZR Turbo R

Read more less

This clevis inner tie rod set is designed for the Polaris Pro R, Pro S and Turbo R as a heavy-duty replacement for the OEM inner tie rod assembly. It replaces the factory inner ball-and-socket design with a fully adjustable clevis arrangement using an FK JMX heim joint, while retaining the OEM outer joint and steering rack boot. Manufactured from 4140 chromoly steel, the kit is intended for demanding applications and improved durability, with increased strength and corrosion resistance. Supplied as a complete kit to service one vehicle. Features Clevis inner tie rod set for the Polaris Pro R, Pro S and Turbo R Replaces the OEM inner ball-and-socket tie rod design Fully adjustable clevis arrangement Designed for demanding applications Retains the OEM outer joint Retains use of the OEM steering rack boot to help prevent contaminants entering the system Supplied as a complete kit to service one vehicle Corrosion-resistant finish Specifications Manufactured from 4140 chromoly steel FK JMX heim joint Nitride-coated finish 50% higher strength than OEM 62% larger diameter in critical areas Vehicle Fitments Polaris Turbo R Polaris Pro R Polaris Pro S

Read more less

The CA Tech High Clearance Radius Rod Kit is a heavy-duty suspension upgrade designed for Polaris RZR Pro R, Pro S and Turbo R models. Manufactured from billet aluminium and equipped with premium FK spherical bearings, this four-rod set is engineered to provide increased ground clearance and dependable performance in demanding off-road conditions. The kit delivers an additional 2.32 inches of clearance at the outer edges and 1.54 inches of additional clearance in the centre when compared with standard OEM radius rods. Specifications Quantity: 4 radius rods Material: 6061 billet aluminium High-clearance rods manufactured from billet aluminium FK JMX12T heim joints 3/4" FK JMX12T heims 3/4" FK WSSX12T spherical bearings Additional clearance at outer edges: 2.32" Additional clearance in centre: 1.54" Cross-Reference OEM Part Numbers CA-132-BL-RM Vehicle Fitments Polaris RZR Pro R Polaris RZR Pro S Polaris RZR Turbo R

Read more less

The CA Tech Pull Plate is a heavy-duty recovery point designed for Polaris RZR Pro R, Pro S and Turbo R models. Machined from a single solid piece of 6061 T6 aluminium bar stock, it provides a strong and reliable towing and recovery solution. The pull plate and tow loop are precision machined, powder coated, and CNC finished with a machined logo and rounded edges for a durable and refined appearance. Manufactured in the USA, it is backed by a lifetime warranty against workmanship and manufacturing defects. Features Heavy-duty pull plate and tow loop for towing and vehicle recovery Precision machined from a single solid billet for maximum strength Powder-coated finish with CNC-machined logo Rounded edges for a refined finish Lifetime warranty against workmanship and manufacturing defects Manufactured in the USA Compatible with CA Tech RZR Pro R Radius Rods Specifications Part Number: CA-131-BL Material: 6061 T6 aluminium Manufactured from 1.5" × 8" solid aluminium bar stock Vehicle Fitments Polaris RZR Pro R Polaris RZR Pro S Polaris RZR Turbo R

Read more less

These boxed upper A-arms are designed for the Polaris RZR XP 1000 and XP Turbo as a reinforced replacement for OEM control arms. Manufactured for high accuracy and fitment, they are intended to address common OEM weak points and provide a more durable solution in demanding conditions. The arms feature boxed and gusseted construction and are supplied with pre-installed bushes. Features Boxed upper A-arms for the Polaris RZR XP 1000 and XP Turbo Designed to address common weak points and failure areas found on OEM control arms Boxed and gusseted for increased strength Intended for precise fitment Pre-installed bushes included Durable powder-coated finish Specifications Manufactured from HSLA steel Laser cut construction CNC bent for accuracy and fitment Vehicle Fitments 2014-2023 Polaris RZR XP 1000 2014-2023 Polaris RZR XP Turbo

Read more less

These boxed lower A-arms are designed for the Polaris RZR XP 1000 and XP Turbo as a reinforced replacement for OEM control arms. Manufactured for high accuracy and fitment, they are intended to address common OEM weak points and provide a more durable solution in demanding conditions. The arms feature boxed and gusseted construction and are supplied with pre-installed bushes. Features Boxed lower A-arms for the Polaris RZR XP 1000 and XP Turbo Designed to address common weak points and failure areas found on OEM control arms Boxed and gusseted for increased strength Intended for precise fitment Pre-installed bushes included Durable powder-coated finish Specifications Manufactured from HSLA steel Laser cut construction CNC bent for accuracy and fitment Vehicle Fitments 2014-2023 Polaris RZR XP 1000 2014-2023 Polaris RZR XP Turbo

Read more less

This shift gate is designed for the 2017-2025 Can-Am Maverick X3 to allow quicker gear changes between high and reverse, or low and reverse, without needing to look down at the shifter. It is particularly useful in technical driving situations where maintaining attention on the trail is important. Installation requires trimming of the factory tunnel. Features Shift gate for the 2017-2025 Can-Am Maverick X3 Allows shifting from high to reverse without looking down for gear selection Allows shifting from low to reverse without looking down for gear selection Useful in technical crawling and recovery situations Helps the driver keep attention on the trail Requires trimming of the factory tunnel for installation Vehicle Fitments 2017-2025 Can-Am Maverick X3

Read more less

These boxed trailing arms are designed for the Can-Am Maverick X3 72-inch platform as a reinforced replacement for OEM trailing arms. Revised from a previous generation design, they feature additional gusseting in high-impact areas and increased overall structural strength to address common OEM weak points and help prevent failure. Manufactured for precise fitment, they are intended for demanding recreational and competition use. Features Boxed trailing arms for the Can-Am Maverick X3 72-inch platform Revised and reinforced design based on a previous generation Additional gusseting in high-impact areas Increased overall structural strength to help prevent failure Designed to address common weak points found on OEM arms Intended for precise fitment Suitable for recreational and competition use Specifications Laser cut construction Manufactured from 11-gauge steel CNC bent for fitment

Read more less

These lower boxed A-arms are designed for the Can-Am X3 72-inch platform as a heavy-duty replacement for OEM control arms. Manufactured in-house using CNC laser cutting and CNC bending processes, they are intended to address common OEM weak points and provide a more durable solution. The arms are supplied with bushings pre-installed and use enlarged mounting bushes to reduce wear and improve service life. Features Heavy-duty lower boxed A-arms for the Can-Am Maverick X3 72-inch platform Designed to address common weak points and failure areas found on OEM control arms Bushings pre-installed for direct fitment Increased bushing size to reduce wear and improve longevity Suitable for use in demanding chemical and environmental conditions High wear and abrasion resistance Specifications CNC laser cut construction CNC bent in-house Mounting bushing size increased by 25% Bushings manufactured from TIVAR® UHMW-PE material

Read more less

These upper boxed A-arms are designed for the Can-Am Maverick X3 72-inch platform as a reinforced replacement for OEM control arms. Manufactured in-house using CNC laser cutting and CNC bending processes, they are intended to address common OEM weak points and improve durability. The arms are supplied with bushings pre-installed and use enlarged mounting bushes to reduce wear and extend service life. Factory steering stops on the knuckles must be trimmed to provide clearance for the upper control arms. Features Upper boxed A-arms for the Can-Am Maverick X3 72-inch platform Designed to address common weak points and failure areas found on OEM control arms Bushings pre-installed Increased bushing size to reduce wear and improve service life Resistant to most chemicals and operating conditions commonly encountered High wear and abrasion resistance Factory steering stops on the knuckles require trimming for clearance Specifications CNC laser cut construction CNC bent in-house Mounting bushing size increased by 25% Bushings manufactured from TIVAR® UHMW-PE material

Read more less

This front bulkhead is designed for the 2017-2025 Can-Am Maverick X3 as a heavy-duty reinforcement component for the front end of the vehicle. Developed from race testing and performance research, it is intended to strengthen the front structure, improve impact resistance and provide added support for the fan shroud. It also includes standard and wide winch mounting points to suit a broad range of side-by-side winches. Features Front bulkhead for the 2017-2025 Can-Am Maverick X3 Heavy-duty reinforced design Strengthens and solidifies the front end of the vehicle Provides added protection from impact Reinforces the fan shroud area Includes standard and wide winch mounting points Compatible with most side-by-side winches on the market Specifications Manufactured from 3/16-inch steel Manufactured from 11-gauge steel Vehicle Fitments 2017-2025 Can-Am Maverick X3

Read more less

This billet aluminium rear sway bar mount is designed for the 2017-2025 Can-Am Maverick X3 as a stronger replacement for the OEM mount. It addresses common failure points associated with the factory component, including breakage at the centre and excess movement caused by poor tolerances. The mount is engineered to provide a more secure fit around the bushing and mounting bolt to help reduce movement and wear. Features Billet aluminium rear sway bar mount for the 2017-2025 Can-Am Maverick X3 Replacement for the OEM rear sway bar mount Designed to address common breakage at the centre of the factory mount Improved fit around the bushing to reduce excess movement Tighter mounting bolt fit to reduce movement and wear Long-lasting coated finish Specifications Manufactured from T6 6061 aluminium Billet machined construction Vehicle Fitments 2017-2025 Can-Am Maverick X3

Read more less

This front double shear gusset strengthening kit is designed for the Can-Am Maverick X3 to reinforce the unsupported front section ahead of the A-arms by tying the front end together more securely. It is intended for machines used in demanding conditions and helps improve structural support at the front of the vehicle. This kit is not compatible with bumpers or bulkheads using rear-mounted winches without modification. Features Front double shear gusset strengthening kit for the Can-Am Maverick X3 Reinforces the front section ahead of the A-arms Ties the front end together for increased structural support Intended for demanding riding conditions Helps maintain front-end integrity Not compatible with bumpers or bulkheads with rear-mounted winches without modification Vehicle Fitments 2017-2025 Can-Am X3

Read more less

This rear bulkhead nut plate kit with M12 x 1.75 hardware pack is designed for the 2017-2025 Can-Am Maverick X3 as a replacement or service component for the rear bulkhead mounting area. Features Rear bulkhead nut plate kit for the 2017-2025 Can-Am Maverick X3 Includes M12 x 1.75 hardware pack Vehicle Fitments 2017-2025 Can-Am Maverick X3

Read more less