Dirt Racing

LOOLIFL Super 502 Instant Glue is an extra-strong, fast-drying adhesive designed for rapid bonding across a wide range of materials. It is suitable for practical repairs, craft work, household use, and industrial applications where a small amount of adhesive is required to create a secure bond. Features Bonds metal, rubber, plastic, toys, wood, ceramics, jade, jewellery, handicrafts, sporting goods, electrical appliances, and decorations Suitable for repairs, crafts, and general bonding applications Designed for fast adhesion using only a small amount of glue Adhesive should be applied to one side of the joint surface before pressing both surfaces together Excess glue should be wiped from the nozzle with a dry cloth before replacing the cap Check the image before ordering to avoid mistakes Professional assistance should be used if unsure about application Specifications Bonding time: approximately 11 to 20 seconds Joint surfaces must be free from oil, water, rust, and paint before bonding Glue should not be spread evenly across the surface Excessive glue application can reduce bonding effectiveness Thick adhesive films may weaken the felting and bonding effect Store in a shaded place away from sunlight and heat Safety and Handling Open the plastic nozzle with a needle drill Keep the nozzle away from the face when opening Do not over-pull or squeeze the tube Avoid glue dripping into the eyes or splashing into the mouth Keep out of reach of children Avoid contact with skin and fingers Do not expose to direct sunlight or hot places

Read more less

Liquid electrical tape that forms a flexible, rubberised insulating coating for cables, connectors, and electronics, providing sealing and protection from moisture and contaminants for general electrical repair and waterproofing tasks. Features Please see image before ordering to avoid mistakes Best value for money Easy to install; if unsure, please use a professional Uses Sealing plug heads, Sealing wiring joints, Backs of ignition switches, Perfect for extreme waterproofing electronics, Put over soldered joins, Repairing automotive circuit boards, Repairing data cables, Repairing wire boxes, Sealing circuit boards and more. Directions Clean the surface to ensure it is free of dust, oil and water. Wrap the glue evenly where it needs to be bonded. Let stand for 24 hours and wait for the gel to cure before use, if you want better effect then apply the glue again after curing. Matters Needing Attention: Please save and use in well-ventilated environment. In case of contact with skin and eyes, please rinse with plenty of water. Please keep away from children. Keep away from sources of ignition. Shelf life: 24 months (8-16?), manufacturer date on bottom of tube, storage temperature and opening will affect the shelf life, as long as not y it will work. Tighten the bottle cap after use and store it in a sealed manner. Due to the diversity and uncertainty of the substrate, please conduct a practical test before use.

Read more less

This steel flywheel puller is designed for removing compatible flywheels and rotors during engine servicing and repair. Its robust construction is intended to resist deformation during use, while controlled manufacturing standards and a durable finish support reliable operation and extended service life. Features Designed for flywheel and rotor removal on compatible applications Suitable for motorcycles, scooters, dirt bikes, go-karts and ATVs Sturdy construction for repeated workshop use Corrosion-resistant finish Designed for straightforward installation and use Specifications Thread size: M22 x 1.50 Material: Heat-treated steel Finish: Black Cross-Reference OEM Part Numbers 030920040 Application Notes Check the product image and required thread size before ordering to avoid incorrect selection Professional fitting is recommended if you are unsure of the correct installation or removal procedure

Read more less

Heavy-duty flywheel puller tool set designed for removing Polaris ATV and UTV flywheels with a compatible three-bolt mounting pattern. The puller is intended for workshop use when servicing flywheels and related engine components, helping remove stubborn flywheels with controlled, even force. Check the product image and vehicle compatibility before ordering, as this tool does not fit some later model RZR, General, Ranger, and Sportsman models. Features Designed for flywheel removal on compatible Polaris ATV and UTV models Suitable for servicing stubborn or tightly fitted flywheels Uses a three-bolt mounting arrangement for secure attachment to compatible flywheels Intended as a replacement workshop tool Professional installation or use is recommended if unsure Specifications Approximate diameter: 3 in Material: high-strength steel Tool type: flywheel puller tool set Included components: 1 flywheel puller, 4 screws, 3 gaskets Cross-Reference OEM Part Numbers 100-3516 Vehicle Fitments Polaris Trail Blazer 250, 1990-2006 Polaris Trailblazer 330, 2008-2013 Polaris Trail Blazer 400, 2003 Polaris Trail Boss 330, 2003-2013 Polaris Big Boss 6x6, 1998-1999 Polaris Worker 500, 1999-2000 Polaris Xpedition 325, 2000-2002 Polaris Xpedition 425, 2000-2002 Polaris Xpress 300, 1996-1999 Polaris Xpress 400, 1996-1997 Polaris Xplorer 300, 1996-1999 Polaris Xplorer 400, 1995-2002 Polaris Xplorer 500, 1997 Polaris ATP 500, 2004-2005 Polaris Hawkeye 400 HO, 2011-2014 Polaris Magnum 325, 330, 500, 1999-2006 Polaris Scrambler 400, 500, 1994-2012 Polaris Sport 400, 1998-1999 Polaris Sportsman 400, 2001-2005 and 2008-2014 Polaris Sportsman 450, 2006-2007 Polaris Sportsman 500, all models, 1996-2012 Polaris Sportsman 600, 2003-2005 Polaris Sportsman 700, 2003-2007 Polaris Sportsman 800, 2005-2014 Polaris RZR 800, 2009-2012 Polaris Ranger 500, 1999 Polaris Series 10/11 Ranger

Read more less

This rear chain hub C wrench is a workshop tool used to adjust the eccentric rear hub during rear chain adjustment on compatible Ducati motorcycles. It is intended for the same application as the original equipment tool, allowing the rear hub adjuster to be turned in the standard manner on listed single-sided rear hub models. Features Direct replacement for the original equipment tool Used for rear chain hub adjustment Original-style fit and operation Suits listed Ducati single-sided rear hub applications Cross-Reference OEM Part Numbers 8336992 Vehicle Fitments Ducati Monster S4R Ducati Streetfighter 848 Ducati 748 Ducati 916 Ducati 996 Ducati 998 Ducati 1098 Ducati 1198 Ducati 1199 Ducati V4

Read more less

This 36 mm water pump drive bolt tool is supplied for service and maintenance work on Polaris Scrambler and Sportsman 850 and 1000 applications. It is used to install or remove the gear water pump drive bolt, also referred to as the flywheel bolt, where the 36 mm bolt type is fitted. The tool is manufactured to OEM specifications for fit and appearance and is intended to meet or exceed OEM quality standards. Features Used for service and maintenance applications Suitable for installing or removing the water pump drive bolt Designed for Polaris Scrambler and Sportsman 850 and 1000 applications using the 36 mm gear water pump drive bolt Direct OEM replacement Uses stock mounting locations Manufactured to OEM specifications for appearance and fit Easy to install Professional installation recommended if unsure Check the image before ordering to avoid mistakes Specifications Size: 36 mm Cross-Reference OEM Part Numbers 5140078 PA-50995 Vehicle Fitments Polaris Scrambler 1000 EU (2017) Scrambler 1000 XP EU (2019) Scrambler XP 1000 EU (2018, 2020) Sportsman 1000 XP EU (2019) Sportsman Touring XP 1000 48" EU 3PC (2020) Sportsman XP 1000 48" EU 3PC (2020) Sportsman XP 1000 EU (2017-2018)

Read more less

Clutch spider tool kit primary for Kawasaki applications, manufactured to OEM specifications as a direct replacement and designed to match the original equipment in appearance. It uses stock mounting locations and is intended for straightforward installation. Please check the image before ordering to avoid mistakes, and professional installation is recommended if you are unsure. Features Meets or exceeds OEM quality Direct OEM replacement Uses stock mounting locations Matches the original equipment in appearance Easy to install Professional installation is recommended if unsure Please check the image before ordering to avoid mistakes Vehicle Fitments Kawasaki Mule 610 600 Kawasaki ProFX Kawasaki ProFXT Kawasaki Brute Force 650 KVF650 (2005-2013) Kawasaki Brute Force 750 KVF750 (2005-2023) Kawasaki Prairie 700 KVF700 (2004-2006) Kawasaki Teryx4 750 KRT750 (2008-2013) Kawasaki Teryx 800 KRF800 (2014-2023) Kawasaki Teryx4 800 KRT800 (2014-2023) Kawasaki Prairie 360 4x4 KVF360A/B/C (2003-2013)

Read more less

This car tyre inflator nozzle is a lock-on Schrader valve chuck with an integrated open/close ball valve. It connects an air compressor hose to a vehicle tyre valve, providing secure attachment and controlled airflow during inflation, including interrupted airflow to assist with seating tyre beads. Features Locks securely onto Schrader tyre valves during inflation Provides quick open/close airflow control Supports rapid tyre inflation Allows interrupted airflow to assist with seating tyre beads Adapts an air compressor hose for car tyre inflation Specifications Supplied quantity: 1 piece Connection fitting size: 1/4 inch Valve type: Schrader Valve control: Open/close ball valve

Read more less

This LUCAS ignition key switch set is designed for tractor, agricultural and plant applications, providing a replaceable ignition/starter switch solution for general tractor renovation use. Supplied as a complete set with two keys, it is suitable for universal tractor and plant fitments and cross-references common Lucas-style applications. LUCAS 35670 128SA TRACTOR PLANT IGNITION SWITCH FOR MASSEY FERGUSON 275 CASE JCB Features Ignition/starter key switch for tractor, agricultural and plant applications Suitable for general tractor renovation use Supplied as a complete set Comes with two keys Replaceable switch parts Specifications Voltage: 12V/24V Condition: Brand new Cross-Reference OEM Part Numbers 35670 128SA C5NN11N501A, D3NN11N501A, D5NN11N501A, E7NN11N501AA, E7NN11N501AB, E7NN11N501AC, E8NN11N501AA, 2301088, 81838692, 81871583, 82849085, 83902803, 83959710, 83976890, 83999543, A595074, 128SA-30811/36614, 54034149, C5NN11N572A, D5NN11N572A, D1NN11603B Vehicle Fitments Universal Tractor Plant Lucas Tractor Plant ignition switch 128SA applications Massey Ferguson 275 Case JCB Ford 2000, 2100, 2150, 2300, 2310, 2600, 2610, 2810, 2910, 3000, 3055, 3100, 3110, 3120, 3150, 3230, 3300, 3430, 3600, 3610, 3900, 3910, 3930, 4000, 4100, 4110, 4130, 4140, 4200, 4330, 4340, 4410, 4600, 4610, 4630, 4830 to 4/91, 5000, 5030 to 4/91, 5100, 5110, 5200, 5340, 5600, 5700, 5610, 5900, 6410, 6600, 6610, 6700, 6710, 6810, 7000, 7010, 7100, 7200, 7410, 7600, 7610, 7700, 7710, 7810, 7910, 8000, 8010, 8210, 8530, 8600, 8630, 8700, 8730, 8830, 9000, 9600, 9700 Compatible with Ford Loader, Backhoe: 230A, 231, 233, 234, 250C, 260C, 333, 334, 335, 340, 340A, 340B, 345, 345C, 345D, 420, 445, 445A, 445C, 445D, 450, 455, 455C, 455D, 515, 530A, 531, 532, 535, 540, 540A, 540B, 545, 545A, 545C, 545D, 550, 555, 555A, 555B, 555C to 4/91, 575D to 4/91, 650, 655, 655A, 655C to 4/91, 655D, 675D to 4/91, 750, 755, 755A, 755B, 3400, 3500, 3550, 4400, 4500, 4550, 5500, 5550, 6500, 7500, 2110LCG, 4110LCG Compatible with Ford TW5, TW10, TW15, TW20, TW25, TW30, TW35 Important Information: Does not fit any Ford compact tractor models (1000, 1100, 1200 etc., built by Shibaura)

Read more less

This 10-piece screw extractor kit is designed to remove damaged or stripped screws, bolts, and studs using multi-spline easy-out drill bits, providing a practical solution for extraction tasks where standard tools cannot gain purchase. Features Removes damaged or stripped screws, bolts, and studs Multi-spline easy-out design for improved grip during extraction Suitable for use with drill bits for screw removal tasks Intended for straightforward installation and use Image reference advised before ordering to avoid selection errors Specifications Set quantity: 10 pcs Material: Alloy steel Measurement tolerance: 1–3 cm (manual measurement)

Read more less

This clutch holding tool is used for the disassembly and assembly of the clutch by locking the inner shaft and outer basket, allowing the retaining nut to be removed or tightened without damage to the parts. Precision manufactured for workshop use, it is designed to provide secure clutch retention during service procedures. Features Used for clutch disassembly and assembly Locks the inner shaft and outer basket Allows the retaining nut to be removed or tightened without damage to the parts Precision manufactured for long service life Check the product image before ordering to help avoid ordering errors Cost-effective replacement part High-quality replacement part with a satisfaction guarantee Easy to install; professional fitting is recommended if you are unsure Specifications Material: Iron Finish: Black coating Zinc plated Vehicle Fitments BMW S1000RR - all models

Read more less

This motorcycle nitrogen charging tool kit is designed for servicing WP reservoir suspension shocks on motorcycles, ATVs, and UTVs. It provides a portable connection solution for nitrogen shock charging and is intended to match original equipment appearance and fitment for compatible WP reservoir shock applications. Features Portable, shakeproof design for suspension maintenance Designed for WP suspension shocks with a reservoir Enables nitrogen charging during WP shock servicing Suitable for universal motorcycle, ATV, and UTV applications Intended for use with Honda, KTM, Husqvarna, Yamaha, Kawasaki, Suzuki, GasGas, Avantis, Motoland, BRZ, Motax, SM-Motors, GR, Zongshen, FXMoto, Kayo, Bosuer, Guizun, and Racer applications Manufactured to OEM-style specifications Designed to match original equipment appearance Straightforward installation Professional installation recommended if unsure Product images should be checked before ordering to confirm suitability Specifications CNC machined construction 6065 aluminium alloy material

Read more less

This 23-piece heavy equipment ignition key set includes a selection of commonly used keys for construction and industrial machinery, covering multiple manufacturers and applications across excavators, dozers, backhoes, skid steers, forklifts, rollers, compactors, tractors, and related equipment. The set is supplied as shown in the pictures and is intended to match original keys by appearance and fitment prior to ordering. Features Includes 23 commonly used ignition and access keys for construction and industrial equipment Suitable for use across a wide range of machinery types including excavators, dozers, backhoes, skid steers, forklifts, rollers and compactors Covers multiple manufacturer ignition types and equipment access applications, including battery disconnects, cab doors, side panels and padlocks (where applicable) Supplied as a mixed key assortment as pictured Intended for matching against the original key by appearance before ordering Specifications Key count: 23 pieces MPN: K250, d250, S450, d300, t250, h800, 787 Komatsu OEM reference: TR2611434 Caterpillar OEM reference: 8H-5306 John Deere OEM reference: AT195302 TCM OEM reference: 26322-42311 Hyster references: 186304 / “166” Case reference: R30074 Cole Hersee reference: 83353 John Deere reference: M40718 Kubota reference: K1122-62130 Cross-Reference OEM Part Numbers AT195302 TR2611434 8H-5306 26322-42311 186304 R30074 83353 M40718 K1122-62130 Vehicle Fitments John Deere Commercial (JD): John Deere dozers, backhoes, etc.; AT195302 John Deere–Hitachi Excavator (JDX): John Deere and Hitachi excavators; Case excavator models 1650 & 1850K; Fiat Komatsu Ignition (KOM): Komatsu 787, 646, 648 etc.; Komatsu forklift; Kalmar; Dressta; Sakai forklift; TR2611434 Caterpillar Battery (8398): Caterpillar equipment battery disconnect and older ignitions; 8H-5306 Caterpillar Ignition (CAT): Caterpillar ignitions (1970s to date), cab doors, side panels, padlocks; dozers, backhoes, compactors, articulated trucks, excavators, motor graders, skid steers, tracked tractors, wheel dozers, wheel loaders, log skidders; ASV skid steer; Tigercat; and others Hyster (1430): Hyster rollers and forklifts (186304 / “166”); Caterpillar, Yale and Clark forklifts; Gradall (166); Skytrak and Shuttleshift; Daewoo skid steers 430/440/450 etc.; Mustang skid steers; Ingersoll Rand rollers; Komatsu forklifts Old Case (Snoopy-1142): older Case dozers (R30074); John Deere 1020/1520/2020/2030 & others; Massey Ferguson 135/150/165/175/180/230/245/255/265/275/285/302/304/1080/1085/1105/1150/1155/1500/1800/2135/2200/2500/3165; Cole Hersee 83353; Industrial Tractor models 20/30/40/50A/50C; Terramite backhoe models T5C/T6/T9; Baraga lifts Kobelco Kawasaki (KOB): Kawasaki & Kobelco excavators and loaders; Nissan Mini Giant; Hannix Mini Giant Case–Bobcat (CASE): Case; Bobcat skid steer; International Harvester; Ingersoll Rand; Ditch Witch (some); Pollack; Grove; Vermeer 752 Chipper Grinder; Tenant; Timberjack; Broce; Terex forklift; some JLG Case–Linkbelt Excavator: Case & Linkbelt excavators; JCB excavators; MDI; New Holland K250 Hyundai Excavator (HNT): Hyundai; Nagano; Thomas excavators; Sunward excavator models 70 & 90; Bobcat mini excavator model 316; Daewoo S-5 Bosch (BOSCH): Bosch ignitions JCB: JCB; Bomag; Terex mini excavators; some newer New Holland and Ford; Vibromax; Maxi; Skytrak Legacy; Dynapac LG200/LG500 compactor; Hamm 14657; Volvo mini excavators 14607 & 14603; Linde-Baker forklifts; New Holland 555E Takeuchi Excavator (TAK): Takeuchi ignition; Case mini excavator; New Holland excavator; Gehl track loader Polaris–Lawn Tractor (1148): Case pre-1970s; replaces John Deere M40718 lawn mower key; replaces Indak ignition key; Kubota generators and mowers (K1122-62130); Lincoln Ranger 8 welder; Murray lawn mower; Polaris roto tillers and portables; Sabre & Scott lawnmowers; Scag; Sears; some Vermeer; Gravely; Honda; MTD; Simplicity; Snapper; Wheel Horse; Ariens; and others Kubota (KUBOTA): Kubota B and GL series; Kubota diesel tractors; TLB425/535/225/25/20; International Harvester Cub Cadet 782D; Gehl skid steers; Broce power broom; LayMor Sweeper 8HC; older Thomas diesel skid steer (2003 & earlier); some Ingersoll Rand and Finn Mitsubishi (MIT): Mitsubishi BD2 series dozers; International; older Kubota M series tractors; Caterpillar forklifts; Kumiai; Mitsubishi models 370 & 372; Beaver II s373; Mitsubishi forklifts TCM Excavator (TCM): TCM T800 excavator; OEM 26322-42311 John Deere and Liebherr: track loaders & excavators Volvo, Samsung and Clark: excavators Deutz: tractors; Rammax and Wacker rollers; Multiquip equipment Kato: excavators Daewoo: D300 excavator

Read more less

A three-piece hex shank to square drive impact socket bit set for power drills and cordless impact drivers. Each adaptor features a colour-coded ring for quick size identification and is made from impact grade socket A material to withstand demanding use. Suitable for general tasks with an emphasis on woodworking accuracy and efficiency. Features Colour-coded rings for easy identification and organisation Crafted from impact grade socket A material Versatile 3-piece size range: 1/4", 3/8", and 1/2" Cordless-friendly use for unrestricted movement Specifically designed for woodworking with precise drilling accuracy Unmatched reliability and performance from high-tech materials Manufactured to exacting standards Meets or exceeds OEM quality Direct OEM replacement Please see image before ordering to avoid mistakes Best value for money High-quality replacement part and carries a satisfaction guarantee Easy to install; if unsure, please use a professional Specifications Set contents: 3 pieces (1/4", 3/8", 1/2") Shank type: Hex shank Drive type: Square drive adapters Material: Impact grade socket A Identification: Colour-coded rings Intended use: Woodworking and general drilling/fastening tasks

Read more less

This crankshaft turning tool is designed for use on a wide range of modern Ducati motorcycles from 1990 to the present. It allows for safe and precise engine rotation when performing tasks such as checking valve clearances or setting timing. Constructed from high-grade chrome molybdenum alloy steel, the tool offers durability and resistance to corrosion, ensuring reliable performance over time. Features Direct replacement: Relevant to Ducati tool part number 88713.3824 Function: Allows safe engine rotation for valve clearance checks or timing adjustments Material: Premium chrome molybdenum alloy steel with black anodized finish for durability, corrosion resistance, and extended service life Manufactured to exacting standards to ensure precision and reliability Meets or exceeds OEM quality Easy to install; professional assistance recommended if unsure Important note: Refer to the image before ordering to ensure correct fitment Cross-Reference OEM Part Numbers 88713.3824 Vehicle Fitments Ducati 1098 Ducati 1198 Ducati 1299 Ducati 1199 Panigale Ducati Multistrada 1200 Ducati Multistrada 1100 Ducati Diavel (all years) Ducati Streetfighter (all years) Ducati 748 Ducati 916 Ducati 996 Ducati 998 Ducati 749 Ducati 999 Ducati Hypermotard

Read more less

This clutch holding tool is designed for locking and securing the clutch during disassembly and reassembly procedures on Ducati models equipped with a dry clutch. It provides stable engagement for safe removal of the clutch nut. Features Direct OEM replacement Please see image before ordering to avoid mistakes Best value for money Easy to install; professional assistance recommended if unsure Specifications Allows locking of the clutch for disassembly and reassembly Compatible with all Ducati models fitted with a dry clutch Enables secure removal of the clutch nut Vehicle Fitment Ducati All Dry Clutch Models Ducati Monster Ducati 851 Ducati 888 Ducati 916 Ducati 748 Ducati 998 Ducati 999

Read more less

This cam gear timing belt lock holding tool is designed for use on a range of Ducati motorcycle models. It serves as a direct OEM replacement, providing secure positioning of cam gears during timing belt maintenance or engine work. Features Direct OEM replacement Please see image before ordering to avoid mistakes Best value for money Easy to install; professional assistance recommended if unsure Vehicle Fitment Ducati 848 Ducati 998 Ducati 999 Ducati 1098 Ducati 1198 Ducati Diavel Ducati Hypermotard 821 Ducati Monster 821 Ducati Monster 1000 Ducati Monster 1200 Ducati Multistrada 1200 Ducati Streetfighter 848 Ducati Streetfighter 1100 Ducati Supersport 950

Read more less

This damping rod holding tool is designed for professional disassembly of the shock absorber core inner barrel in Öhlins and KYB fork systems. Constructed from aluminium and iron, it provides secure handling during maintenance of damping rod components and includes multiple adaptors to accommodate common applications. Features Direct OEM replacement Please see image before ordering to avoid mistakes Best value for money Easy to install; professional assistance recommended if unsure Includes 4 adaptors Specifications Material: Aluminium + Iron Adaptors included: 4 Vehicle Fitments Öhlins and KYB fork applications

Read more less

This universal motorcycle front fork rod guide wrench is designed for controlled disassembly and assembly of compatible front suspension components, including removal and installation of front fork inner tubes. Suitable for 41 mm and 43 mm applications, it is intended for use with selected Honda, Suzuki, Kawasaki and Ducati motorcycles and provides a direct replacement-style workshop tool for front fork maintenance. Check the product image and required size carefully before ordering to ensure correct compatibility. Features Designed for front fork and shock absorber disassembly and assembly Assists with removal and installation of front fork inner tubes Ergonomic handle for controlled use Suitable for repeated motorcycle suspension maintenance Straightforward to use; professional assistance is recommended if unsure Intended as a cost-effective replacement workshop tool Specifications Compatible wrench sizes: 41 mm / 43 mm Material: Aluminium alloy Approximate dimensions: 66 x 42 mm / 2.60 x 1.65 in Supplied quantity: 1 motorcycle fork rod guide wrench Dimensions may vary slightly due to manual measurement Vehicle Fitments Honda CBR600RR Honda CBR1000RR Suzuki GSXR1000R Suzuki MSP Suzuki RPM Kawasaki Ninja ZX-10R Kawasaki Z1000 Kawasaki ZX-6R Ducati V4 Ducati V2 Ducati 1199

Read more less

This shock absorber preload adjustment seat disassembly and assembly tool is specifically designed for Showa forks. Manufactured from durable aluminium and stainless steel, it enables precise maintenance and servicing of motorcycle shock absorber components. Features Direct OEM replacement Please see image before ordering to avoid mistakes Best value for money Easy to install; professional assistance recommended if unsure Specifications Material: Aluminium + Stainless Steel Vehicle Fitment For Showa fork applications

Read more less

This 6-piece 1/4 inch drive metric hex bit socket set is designed for use with inner hex sockets and parbuckle screws. Constructed from durable steel alloy, each socket provides reliable performance for a variety of applications in factory, repair, or home settings. The set includes six sizes, offering versatile tool solutions in a compact format. Features Metric 1/4" drive hex bit socket set Suitable for inner hex sockets and parbuckle screws Designed for factory, repair shop, and home use Provides tool solutions for a wide range of applications Refer to product image before ordering to ensure correct selection Specifications Type: HW3, HW4, HW5, HW6, HW7, HW8 Material: Steel alloy Wrench Size: 1/4" (6.3mm) Size: Approx. 3.8 x 1.2 cm (L x W) Colour: Silver and Dark Brown

Read more less

This WP motorcycle front shock absorber maintenance tool is specifically designed for servicing and maintaining WP front shocks on various KTM models. Constructed from durable 7075 aluminium alloy, it features a 1/2" drive and an 8mm slot for compatibility. The tool undergoes a hard oxidation process to enhance its corrosion resistance, wear resistance, insulation, and adsorption capabilities. Features Designed for servicing WP front shock absorbers Constructed from high-strength 7075 aluminium alloy Hard oxidation treatment for enhanced durability and resistance Direct OEM replacement Easy to install; professional installation recommended if unsure Specifications Material: 7075 Aluminium alloy Drive Size: 1/2" Slot Size: 8mm Surface Treatment: Hard oxidation for improved performance characteristics Vehicle Fitments KTM SX KTM SXF KTM XC KTM XCF KTM XCW KTM EXC

Read more less

This 6" 1/4" socket driver handle is a versatile tool designed for both hand-held use and compatibility with 1/4" ratchets via its internal female square drive. Constructed from chrome-vanadium alloy steel and finished with chrome plating, it offers durability, corrosion resistance, and ease of cleaning for automotive and workshop applications. Features Provides flexibility for automotive technicians; use as a hand-held driver or attach a 1/4" ratchet for additional torque Internal female square drive in handle allows use with various ratchets and handles CRV chrome-plating helps protect against corrosion and promotes easy cleanup Hard handle provides comfortable yet secure grip Unmatched reliability and performance from high-tech materials Manufactured to exacting standards for rebuild confidence Meets or exceeds OEM quality Direct OEM replacement Check image before ordering to avoid mistakes Best value for money High-quality replacement part Easy to install; professional installation recommended if unsure Specifications Material: Chrome-vanadium alloy steel Total length: approx. 15.3 cm (6.02 in) Handle length: approx. 9 cm (3.54 in) Drive size: 1/4" male shaft with 1/4" female end in handle

Read more less

The primary clutch puller tool with button clip is designed for clutch removal and servicing on compatible Can-Am ATV and UTV models. It provides the correct thread engagement for primary clutch work and is suitable for use during maintenance, repair, and clutch component replacement. Features Supports primary clutch removal and servicing Designed for accurate clutch removal and installation Direct replacement for the original tool type Manufactured to original equipment quality requirements Suitable for engine and drivetrain service applications Specifications Thread size: M14 x 1.5 Material: Steel Colour: Black Vehicle Fitments Can-Am Commander 800 4x4 (2011, 2014-2015) Commander 800R 4x4 (2011-2017) Commander 1000 4x4 (2011-2017) Commander Max 800R 4x4 (2016-2017) Commander Max 1000 4x4 (2014-2017) Maverick 1000 4x4 (2013) Maverick 1000R 4x4 (2013-2017) Maverick Max 1000R 4x4 (2013-2017) Maverick X3 4x4 (2018-2019) Maverick X3 900 HO 4x4 (2018) Maverick X3 Max 4x4 (2018-2019) Maverick X3 Max R 4x4 (2017-2019) Maverick X3 R 4x4 (2017-2019) Outlander 400 4x4 (2007-2014) Outlander 450 4x4 (2017) Outlander 500 4x4 (2007-2015) Outlander 570 4x4 (2016-2017) Outlander 650 4x4 (2007-2017) Outlander 650 6x6 (2015-2017) Outlander 800 4x4 (2007-2008) Outlander 800R 4x4 (2009-2015) Outlander 850 4x4 (2016-2017) Outlander 1000 4x4 (2012-2015) Outlander 1000 6x6 (2015-2017) Outlander 1000R 4x4 (2016-2017) Outlander L 450 4x4 (2015-2016) Outlander L 500 4x4 (2015) Outlander L 570 4x4 (2016) Outlander L MAX 450 4x4 (2015-2016) Outlander L MAX 500 4x4 (2015) Outlander L MAX 570 4x4 (2016) Outlander Max 400 4x4 (2007-2014) Outlander Max 450 4x4 (2017) Outlander Max 500 4x4 (2007-2017) Outlander Max 570 4x4 (2016-2017) Outlander Max 650 4x4 (2007-2017) Outlander Max 800 4x4 (2007-2008) Outlander Max 800R 4x4 (2009-2015) Outlander Max 850 4x4 (2016-2017) Outlander Max 1000 4x4 (2013-2015) Outlander Max 1000R 4x4 (2016-2017) Renegade 500 4x4 (2008-2015) Renegade 570 4x4 (2016-2017) Renegade 800 4x4 (2007-2008) Renegade 800R 4x4 (2009-2015) Renegade 850 4x4 (2016-2017) Renegade 1000 4x4 (2012-2015) Renegade 1000R 4x4 (2016-2017)

Read more less