Liqui Moly

Liqui Moly Motorbike Engine Flush is a cleaning fluid designed to remove deposits and contaminants from the oil circuits of four-stroke motorcycle engines. It dissolves sludge and lacquer formers, suspending both oil-soluble and oil-insoluble residues, which are then removed during the subsequent oil change. This process restores the engine's original performance and ensures the fresh oil can operate under optimal conditions. Product Features: Effectively cleans internal engine components by dissolving sludge and lacquer deposits Suspends contaminants for removal during oil change Compatible with catalytic converters Safe for use with wet clutches Neutral to common sealing materials Simple application process Volume: 250ml Technical Data: Form: Liquid Base: Additive, carrier liquid Viscosity at 40°C: 24.12mm²/s Flash Point: 61°C Pour Point: -45°C Density at 20°C: 0.805?g/cm³ Application Information: Add 250ml to warm engine oil before oil change (sufficient for up to 4.5 litres of oil) Allow the engine to idle for approximately 10 minutes For manual transmissions, operate the clutch lever several times, holding it for a few seconds each time Proceed with oil and filter change Compatible with all commercially available motor oils

Read more less

Liqui Moly Foam Filter Oil is a specialised fluid designed for treating foam air filters in motorcycles and other small engines. Its high adhesive properties ensure that dust, sand, and dirt are effectively trapped, preventing engine wear and maintaining optimal airflow. This oil is suitable for both two-stroke and four-stroke engines equipped with foam air filters. Product Features: High adhesion to trap dust and dirt particles Enhances engine protection and prolongs service life Water-repellent properties to prevent moisture ingress Does not resinify or foam, ensuring consistent performance Blue tint for easy and uniform application Volume: 500ml Application Information: Clean the foam air filter thoroughly and allow it to dry Pour the foam filter oil into a suitable container Immerse the filter in the oil and massage gently to ensure complete saturation Squeeze out excess oil without wringing the filter Allow the filter to air out for 10 to 15 minutes before reinstalling Ensure the application area is well-ventilated during use This product is ideal for maintaining the efficiency and longevity of foam air filters in motorcycles, ensuring consistent engine protection and performance.

Read more less

Liqui Moly Motorbike Fork Oil 5W Light is a fully synthetic suspension fluid engineered for universal application in motorcycle telescopic forks and shock absorbers. Its advanced formulation ensures consistent damping performance, minimises shear losses, and provides excellent wear and corrosion protection, even under demanding riding conditions. This 5-litre volume is ideal for workshops and frequent service applications. Product Features: Fully synthetic formulation for consistent damping behaviour Reduces shear losses and maintains stable viscosity Prevents foam formation and seal hardening High wear resistance and corrosion protection Suitable for telescopic forks and shock absorbers in motorcycles, mopeds, and other two-wheeled vehicles Volume: 5 litres Technical Data: Viscosity at 40°C: 18.0mm²/s Viscosity at 100°C: 4.1mm²/s Viscosity Index: 131 Pour Point: -72°C Flash Point: 220°C Density at 15°C: 0.825g/cm³ Application Information: Follow the manufacturer's specifications for fork oil replacement intervals and procedures Ensure components are clean and free from contaminants before refilling Dispose of used oil responsibly in accordance with local regulations

Read more less

Liqui Moly Motorbike 2T Semisynth Scooter Street is a semi-synthetic two-stroke engine oil formulated for air- and water-cooled engines operating under normal to high loads. It provides optimal lubrication, excellent wear protection, and maintains engine cleanliness. The oil is self-mixing and suitable for both separate and premix lubrication systems, with a recommended mixing ratio of up to 1:50, adhering to manufacturer guidelines. Product Features: Semi-synthetic formulation for enhanced performance Provides excellent wear protection and engine cleanliness Low smoke emissions for cleaner operation Self-mixing; suitable for premix and separate lubrication systems Compatible with air- and water-cooled two-stroke engines Volume: 500ml Specifications: API TC ISO L-EGC JASO FC TISI Application Information: For premix systems: Pour the appropriate amount into the fuel tank, then add petrol to achieve the desired mixing ratio. For separate lubrication systems: Fill the oil tank as specified by the manufacturer. Always follow the engine manufacturer's recommendations for mixing ratios and maintenance intervals.

Read more less

Liqui Moly Motorbike 2T Semisynth Scooter is a semi-synthetic two-stroke engine oil designed for air- and water-cooled scooter engines operating under normal to high loads. It offers reliable lubrication, excellent wear protection, and low smoke emissions, ensuring optimal engine cleanliness and performance. Suitable for both premix and separate lubrication systems, this oil is self-mixing with a recommended mixing ratio of up to 1:50, following manufacturer guidelines. Product Features: Semi-synthetic formulation for enhanced performance Provides excellent wear protection and engine cleanliness Low smoke emissions for cleaner operation Self-mixing; suitable for premix and separate lubrication systems Compatible with air- and water-cooled two-stroke engines Volume: 1 litre Specifications: API TC ISO L-EGC JASO FC TISI (Thailand Industrial Standards Institute) Application Information: For premix systems: Pour the appropriate amount into the fuel tank, then add petrol to achieve the desired mixing ratio. For separate lubrication systems: Fill the oil tank as specified by the manufacturer. Always follow the engine manufacturer's recommendations for mixing ratios and maintenance intervals.

Read more less

Liqui Moly Motorbike 2T Basic Scooter is a mineral-based two-stroke engine oil formulated for air- and water-cooled engines operating under standard conditions. It provides reliable lubrication, reduces wear, and maintains engine cleanliness. The oil is self-mixing and suitable for both separate and premix lubrication systems, with a recommended mixing ratio of up to 1:50, adhering to manufacturer guidelines. Product Features: Mineral oil formulation for consistent performance High wear resistance and corrosion protection Helps maintain clean spark plugs and prevents deposit formation Self-mixing; suitable for separate and premix lubrication systems Compatible with air- and water-cooled two-stroke engines Volume: 1 litre Specifications: API TC ISO L-EGB JASO FB Technical Data: Viscosity at 40°C: 67mm²/s Viscosity at 100°C: 9.1mm²/s Viscosity Index: 111 Pour Point: -15°C Flash Point: 146°C Density at 15°C: 0.865g/cm³ Application Information: For premix systems: Pour the appropriate amount into the fuel tank, then add petrol to achieve the desired mixing ratio. For separate lubrication systems: Fill the oil tank as specified by the manufacturer. Always follow the engine manufacturer's recommendations for mixing ratios and maintenance intervals.

Read more less

Liqui Moly Motorbike 4T 10W-40 Scooter is a high-performance mineral-based engine oil formulated for air- and water-cooled four-stroke scooter engines. It ensures optimal lubrication, wear protection, and engine cleanliness under various operating conditions. Tested for use with catalytic converters, this oil is suitable for both urban commuting and extended rides. Product Features: Mineral oil formulation for consistent performance Ensures optimal lubrication and wear protection Maintains engine cleanliness and reduces deposits Compatible with catalytic converters Suitable for air- and water-cooled four-stroke scooter engines Volume: 1 litre Specifications: SAE Viscosity Grade: 10W-40 API Service Classification: SG, SJ ACEA A3 Technical Data: Viscosity at 40°C: 90.0mm²/s Viscosity at 100°C: 14.0mm²/s Viscosity Index: 159 Pour Point: -39°C Flash Point: 230°C Density at 15°C: 0.865g/cm³ Application Information: Designed for air- and water-cooled four-stroke scooter engines Ensure compatibility with manufacturer specifications before use Follow recommended oil change intervals and procedures Dispose of used oil responsibly in accordance with local regulations

Read more less

Liqui Moly Gear Oil GL4 80W is a high-performance mineral-based transmission fluid formulated for use in manual gearboxes and final drives subjected to normal to high loads. It ensures smooth gear shifting, excellent wear protection, and reliable lubrication across a wide temperature range. Product Features: Mineral oil formulation with carefully selected base oils and additives Facilitates smooth and precise shifting High wear resistance and pressure-absorption capability Excellent viscosity-temperature behaviour and ageing resistance Compatible with common sealing materials Reduces running noise Volume: 500ml Specifications: SAE Class: 80W API GL4 MIL-L 2105 ZF TE-ML 02B, 17A Technical Data: Viscosity at 40°C: 93.4mm²/s Viscosity at 100°C: 11.4mm²/s Viscosity index: 110 Pour point: -27°C Flash point: 218°C Density at 15°C: 0.885g/cm³ Application Information: Suitable for manual, auxiliary, and axle drive transmissions with normal to high loading Follow the manufacturer's specifications for oil change intervals and procedures Ensure components are clean and free from contaminants before refilling

Read more less

Liqui Moly Fork Oil 10W Medium is a fully synthetic suspension fluid engineered for universal use in motorcycle telescopic forks and shock absorbers. Its advanced formulation ensures optimal damping performance, minimises foam formation, and provides excellent wear and corrosion protection, even under demanding riding conditions. This 5-litre volume is ideal for workshops and frequent service applications. Product Features: Fully synthetic formulation for consistent damping behaviour Prevents foam formation and seal hardening High wear resistance and corrosion protection Suitable for telescopic forks and shock absorbers in motorcycles, mopeds, and other two-wheeled vehicles Viscosity at 40°C: 28.5mm²/s; at 100°C: 5.7mm²/s Viscosity index: 146 Pour point: -42°C; Flash point: 244°C Volume: 5 litres Application Information: Follow the manufacturer's specifications for fork oil replacement intervals and procedures Ensure components are clean and free from contaminants before refilling Dispose of used oil responsibly in accordance with local regulations

Read more less

Liqui Moly Foam Filter Oil Spray 1604 is a specialised aerosol designed for treating foam and fabric air filters in motorcycles and other small engines. It effectively traps dust and dirt, ensuring optimal airflow and engine performance even under extreme operating conditions. Product Features: Suitable for foam and fabric air filters Compatible with two-stroke and four-stroke engines Ensures optimal airflow and engine performance Protects against dust and dirt ingress Easy application via aerosol spray Volume: 400ml Application Information: Remove coarse contaminants from the filter by gently tapping. Clean the air filter using Liqui Moly Motorbike Foam Filter Cleaner. After the cleaner has evaporated, evenly apply the Foam Filter Oil Spray. Allow the filter to air out for 10 to 15 minutes before reinstallation. Ensure the application area is well-ventilated during use. This product is ideal for maintaining the efficiency and longevity of air filters in motorcycles, ensuring consistent engine protection and performance.

Read more less

Liqui Moly Helmet Interior Cleaner is a specialised solution for the thorough cleaning of motorcycle helmet interiors and related components. Formulated to eliminate bacteria and unpleasant odours, it leaves behind a fresh citrus fragrance. The cleaner forms a protective film that helps prevent rapid recontamination, ensuring prolonged cleanliness.  Product Features: Gently and thoroughly cleans helmet padding, visors, trims, and dual seats Eliminates bacteria and removes musty smells Provides a fresh and pleasant citrus fragrance Forms a protective film to prevent rapid recontamination Suitable for use on various surfaces within the helmet interior Volume: 300ml Application Information: Shake the product vigorously before use Spray onto the surface to be treated Allow the cleaner to act for approximately 10 minutes Rub dry with a cloth Test plastic components on a suitable spot beforehand to ensure colour fastness Do not wear the helmet immediately after cleaning; ensure it is well-ventilated and dry before use

Read more less

Liqui Moly Chain and Brake Cleaner 1602 is a specialised solvent-based aerosol designed for rapid and effective cleaning of motorcycle and ATV components. Formulated without chlorine or acetone, it ensures thorough degreasing without leaving residues, making it suitable for chains with and without O/X-rings, as well as drum and disc brake systems. Product Features: High proportion of active components for efficient cleaning Acetone-free and chlorine-free formulation Low surface tension for optimal penetration Effectively dissolves resin, tar, oil, and grease residues Controlled evaporation leaving no residues Suitable for cleaning chains (with/without O/X-rings), brake pads, calipers, and other structural parts CO2 propellant ensures even spray distribution Application Information: Place a suitable container or cloth beneath the area to be cleaned. Spray the cleaner generously onto the contaminated parts. Allow the solvent to run off and evaporate completely (approximately 10 minutes). After drying, components will be clean and ready for lubrication or further maintenance. Avoid contact with plastic parts and painted surfaces; test on an inconspicuous area if necessary. Do not immerse rubber components in the cleaner to prevent potential degradation.

Read more less

Liqui Moly Leather Suit Care is a high-grade treatment emulsion formulated for the maintenance and protection of smooth leather surfaces. It preserves the structure, grip, and elasticity of leather, providing a silky, lustrous protective layer with a waterproofing effect. Regular application enhances the appearance and feel of the leather, prevents premature fading, and extends its service life. This product is suitable for use on motorcycle leather suits, saddlebags, seats, and other smooth leather items. Not suitable for suede. Product Features Preserves leather's structure, grip, and elasticity Provides a silky, lustrous protective layer with waterproofing effect Protects against everyday dirt and wear Prevents premature fading and extends leather's service life Suitable for all coloured leathers, including very light tones Free from dyes; does not alter leather colour Packaging: 250ml plastic bottle Technical Specifications Form: Liquid Base: Lanolin, silicone emulsions, additives and fragrances, emulsifiers Density at 20°C: 1.00g/cm³ pH value: 7.0 (20°C) Viscosity: Medium viscous Colour/Appearance: Light, beige Odour: Mild Shelf life in original sealed container: 36 months  Application Information If required, clean the leather surfaces to be treated and let dry. Shake product vigorously before use. Pour onto a soft cloth or rag and, using circular motions, apply thinly and uniformly under light pressure. Polish off after briefly allowing it to work. Regular application ensures an optimum appearance. Not suitable for suede. Check for material compatibility before application on a hidden area. Clean light-coloured leather surfaces soiled by dark stains before treatment with Liqui Moly Universal Cleaner

Read more less

Liqui Moly Chain Lube White is a fully synthetic, high-performance chain lubricant designed for motorcycles operating under demanding conditions. Its white-coloured formulation ensures visible application, facilitating even coverage and thorough lubrication. The lubricant offers exceptional adhesion, resisting fling-off even at high speeds, and provides robust protection against wear and corrosion. Suitable for all types of chains, including O-ring, X-ring, and standard chains, it maintains optimal performance across a wide temperature range. For best results, clean the chain with Liqui Moly Motorbike Chain and Brake Cleaner before application. Product Features Fully synthetic white chain lubricant for motorcycles Visible application ensures complete coverage Excellent adhesion properties minimize fling-off Provides superior wear and corrosion protection Effective across a temperature range from –30°C to +180°C Suitable for O-ring, X-ring, and standard chains Reduces chain elongation and extends service life Packaging: 50ml aerosol can; refillable from 400ml can Technical Specifications Base: Synthetic oil with additives Colour: White Form: Aerosol, liquid Operating temperature range: –30°C to +180°C Flash point: –60°C Water resistance at 90°C: Rating 0 (DIN 51 807) Odour: Characteristic Application Information Clean the motorcycle chain thoroughly using Liqui Moly Motorbike Chain and Brake Cleaner. Shake the aerosol can well before use. Spray the lubricant evenly onto the inner side of the clean, dry chain. Allow the solvent to evaporate completely to ensure optimal adhesion and performance. Regular application is recommended to maintain chain performance and longevity.

Read more less

Liqui Moly Chain Lube White is a fully synthetic, high-performance chain lubricant designed for motorcycles operating under demanding conditions. Its white-coloured formulation ensures visible application, facilitating even coverage and thorough lubrication. The lubricant offers exceptional adhesion, resisting fling-off even at high speeds, and provides robust protection against wear and corrosion. Suitable for all types of chains, including O-ring, X-ring, and standard chains, it maintains optimal performance across a wide temperature range. For best results, clean the chain with Liqui Moly Motorbike Chain and Brake Cleaner before application. Product Features Fully synthetic white chain lubricant for motorcycles Visible application ensures complete coverage Excellent adhesion properties minimize fling-off Provides superior wear and corrosion protection Effective across a temperature range from –30°C to +180°C Suitable for O-ring, X-ring, and standard chains Reduces chain elongation and extends service life Packaging: 400ml aerosol can Technical Specifications Base: Synthetic oil with additives Colour: White Form: Aerosol, liquid Operating temperature range: –30?°C to +180°C Flash point: –60°C Water resistance at 90°C: Rating 0 (DIN 51 807) Odour: Characteristic Application Information Clean the motorcycle chain thoroughly using Liqui Moly Motorbike Chain and Brake Cleaner. Shake the aerosol can well before use. Spray the lubricant evenly onto the inner side of the clean, dry chain. Allow the solvent to evaporate completely to ensure optimal adhesion and performance. Regular application is recommended to maintain chain performance and longevity.

Read more less

Liqui Moly Motorbike 2T Bike Additive is a fuel system treatment formulated for two-stroke engines with either mixed or separate lubrication. It effectively removes deposits from the fuel system, intake, and exhaust ports, preventing their reformation. This leads to enhanced engine performance, reduced fuel consumption, and improved operational reliability. The additive also protects the entire fuel system from corrosion and is tested for compatibility with catalytic converters. Product Features Enhances engine performance by cleaning the fuel system Prevents formation of new deposits Reduces fuel consumption and emissions Protects against corrosion in the fuel system Suitable for all 2-stroke engines with mixed or separate lubrication Tested for compatibility with catalytic converters Packaging: 250ml plastic dispensing bottle Technical Specifications Form: Liquid Colour: Light yellow, clear Density at 15°C: 0.765g/cm³ Viscosity at 40°C: <7mm²/s Flash Point: >61°C Pour Point: –45°C Odour: Characteristic Application Information Add 25ml of the additive to every 5 litres of fuel or fuel mixture. For optimal results, use the product at every refuelling. Suitable for all two-stroke engines with mixed or separate lubrication systems.

Read more less

Liqui Moly Motorbike 4T Bike Additive is a fuel system treatment designed for four-stroke motorcycle engines with carburettor or fuel injection systems. It removes deposits from the fuel system, valves, spark plugs, and combustion chamber, preventing their reformation. This leads to optimised engine performance, reduced fuel consumption, and improved operational reliability. The additive also protects the fuel system from corrosion and prevents carburettor icing. It is compatible with catalytic converters and is suitable for regular use. Product Features Enhances engine performance by cleaning the fuel system Prevents formation of new deposits Reduces fuel consumption and emissions Protects against corrosion in the fuel system Prevents carburettor icing Suitable for carburettor and fuel-injection engines Tested for compatibility with catalytic converters Packaging: 125ml metal can Technical Specifications Form: Liquid Colour: Light yellow, clear Density at 15°C: 0.765g/cm³ Viscosity at 40°C: <7mm²/s Flash Point: >61°C Pour Point: –45°C Odour: Characteristic Application Information Add 125ml of the additive to 15–20 litres of fuel. For optimal results, use the product at every refuelling. Suitable for all four-stroke motorcycle engines, including those with catalytic converters.

Read more less

Liqui Moly Oil Additive is a molybdenum disulfide (MoS2)-based engine treatment designed to reduce friction and wear in both 4-stroke and 2-stroke engines. Its formulation creates a high-load-bearing lubricating film on metal surfaces, enhancing engine smoothness and longevity. This additive is compatible with wet clutches and catalytic converters, and is suitable for engines with separate or mixture lubrication systems. Product Features MoS2-based formula reduces friction and wear Scientifically proven to decrease wear by up to 50% Enhances engine smoothness and reduces operational noise Compatible with wet clutches and catalytic converters Suitable for both 4-stroke and 2-stroke engines Miscible with all commercially available motor oils Packaging: 125ml metal can Application Information For 4-stroke engines: Add 30ml per litre of motor oil; for engines with wet clutches, use 20ml per litre. For 2-stroke engines with separate lubrication: Add 20ml per litre of 2-stroke oil. For 2-stroke engines with mixture lubrication: Add 10ml per 10 litres of fuel-oil mixture. Apply at each oil change or refuelling, as appropriate.

Read more less

Liqui Moly Motorbike HD-Classic SAE 50 Street is a high-performance, single-grade mineral engine oil formulated for four-stroke motorcycle engines, particularly suited for classic models such as Harley-Davidson. Its robust formulation ensures optimal lubrication, high wear resistance, and excellent corrosion protection under extreme operating conditions. The oil's absolute shear stability maintains a consistent lubricating film, contributing to quiet engine operation and extended engine life. Additionally, it exhibits low evaporation loss and oil consumption, making it reliable for long-term use. Product Features Single-grade SAE 50 mineral engine oil Designed for four-stroke motorcycle engines, especially classic models like Harley-Davidson High wear resistance and outstanding corrosion protection Absolute shear stability ensures consistent lubricating film Provides quiet engine running and long engine life Low volatile loss and oil consumption Miscible with all commercially available motor oils Meets API SG specifications Technical Specifications SAE Viscosity Grade: 50 Density at 15°C: 0.900g/cm³ Viscosity at 40°C: 225mm²/s Viscosity at 100°C: 20.2mm²/s Viscosity Index: 104 Pour Point: –9°C Flash Point: 250°C Evaporation Loss (Noack): 4.0% Total Base Number: 11.0mg KOH/g Sulphated Ash: 1.2g/100g Colour Number (ASTM): L 4.5 Application Information Suitable for use in four-stroke motorcycle engines, particularly classic models such as Harley-Davidson. The oil can be mixed with all commercially available motor oils. For optimal performance, follow the engine manufacturer's operating instructions regarding oil specifications and change intervals.

Read more less

Liqui Moly Visor Cleaner is a specialised maintenance spray formulated for cleaning and preserving motorcycle helmet visors, face shields, and protective goggles. It effectively removes dirt, insects, oil, and silicone residues while providing an anti-misting effect on both glass and plastic surfaces. The product ensures a clear view and enhanced safety during rides. Product Features Cleans and maintains helmet visors and protective goggles Removes dirt, insects, oil, and silicone residues Provides an anti-misting effect for improved visibility Suitable for glass and plastic surfaces Long-lasting effect Simple and easy to use Packaging: 100ml plastic spray bottle Technical Specifications Form: Liquid aerosol Colour: Colourless Base: Alcohols and active agents Solubility: Soluble in water Flash Point: –60°C Density at 20°C: 0.68g/cm³ Odour: Lemon Shelf Life: 30 months (in original sealed container) Application Information Test the visor or surface for compatibility. For cleaning dirt and insects: Spray the cleaner onto the surface, allow it to act briefly, then wipe off with a damp cloth or sponge. For anti-misting effect: Spray a thin layer onto the surface and allow it to dry without wiping.

Read more less

Liqui Moly Motorbike 4T Synth 10W-60 Street Race is a fully synthetic high-performance engine oil developed for air- and water-cooled four-stroke motorcycle engines operating under extreme conditions. It ensures optimal lubrication, outstanding engine cleanliness, and excellent wear protection, even at high RPMs and temperatures. This oil is particularly suitable for engines with or without wet clutches and has been tested for use with catalytic converters. Product Features Fully synthetic 4-stroke engine oil for motorcycles Designed for air- and water-cooled engines under extreme operating conditions Ensures optimal lubrication and engine cleanliness Provides excellent wear protection and high shear stability Compatible with wet clutches; meets JASO MA2 requirements Tested for use with catalytic converters Low oil consumption and evaporation loss Meets or exceeds specifications: API SL, JASO MA2 Technical Specifications SAE Viscosity Grade: 10W-60 Density at 15°C: 0.844g/cm³ Viscosity at 40°C: 176.0mm²/s Viscosity at 100°C: 25.0mm²/s Viscosity Index: 176 Pour Point: –39°C Flash Point: 250°C Sulphated Ash: 0.8g/100g Total Base Number: 7.6mg KOH/g Packaging: 1L plastic canister Application Information Developed for air- and water-cooled four-stroke engines exposed to extreme operating conditions. Suitable for sporting applications and engines with or without wet clutches. For optimal effectiveness, use the product unmixed and follow the engine manufacturer's operating instructions.

Read more less

Liqui Moly Motorbike Fork Oil 15W Heavy is a fully synthetic suspension fluid engineered for use in telescopic forks and shock absorbers of motorcycles and other two-wheeled vehicles. Its high-viscosity formulation ensures consistent damping performance, reduces shear losses, and maintains optimal handling characteristics even after prolonged use. The oil effectively prevents foam formation and seal hardening, while providing excellent corrosion and wear protection for extended service life. Product Features Fully synthetic fork and shock absorber oil SAE 15W heavy viscosity for enhanced damping response Reduces shear losses for consistent performance Prevents foam formation and seal hardening Excellent corrosion and wear protection Suitable for universal application in telescopic forks and shock absorbers Ensures reliable drivability over extended periods Packaging: 500ml plastic canister Technical Specifications SAE Viscosity Grade: 15W Density at 15°C: 0.835g/cm³ Viscosity at 40°C: 45.0mm²/s Viscosity at 100°C: 8.0mm²/s Viscosity Index: 151 Pour Point: –36°C Flash Point: 260°C Colour: Light (ASTM L 0.5) Packaging: 500ml plastic canister Application Information Use in accordance with the specifications provided by the manufacturer of the telescopic fork, shock absorber, or two-wheeled vehicle. Ensure compatibility with the required SAE viscosity grade before application.

Read more less