Oils & Lubricants

Mineral lubricant reinforced with Molybdenum bisulphide to handle heavy loads and reduce transmission noise. All mechanical transmission, synchronised or not synchronised gearboxes, gearbox/differential, transfer gearbox and hypoid differentials without limited slip system operating under shocks, heavy loads and low revolution speed or moderate loads and high revolution speed. Very high lubricating power decreases friction and wear. SAE 90 grade at hot temperature to provide outstanding oil film resistance at hot temperature.

Read more less

Mineral Hydraulic Fluid This high-quality mineral hydraulic fluid is engineered for both brake systems and hydraulic suspension components. Reliable Performance: Provides consistent and dependable operation for your motorcycle or scooter's hydraulic systems. Versatile Application: Suitable for use in both brake actuation and suspension damping. Premium Quality: Formulated with high-grade mineral oils for optimal lubrication and protection. Easy to Use: Simple to fill and bleed, ensuring a straightforward maintenance process. Keep your ride smooth and your braking sharp. Vehicle Compatibility Please check the exact model before ordering. Manufacturer Model Years Vehicle type Talaria Sting Offroad [TL3000] Not specified E-bike Talaria Sting Road Legal [TL45] Not specified Electric Motorcycle

Read more less

TYGRIS Cutting & Tapping Fluid Aerosol Spray is a high-performance lubricant designed for cutting, tapping, reaming, and turning operations. Formulated to extend tool life and enhance machining quality, it incorporates extreme pressure additives and corrosion inhibitors for effective performance on a wide range of metals, including stainless steel and titanium. Features Suitable for cutting, tapping, reaming, and turning Extreme pressure additives enhance performance on difficult materials High pressure foaming discharge improves penetration Prolongs tool life and improves machined finish Reduces heat buildup during operation Suitable for use on all metals Contains corrosion inhibitors Specifications Volume: 400ml Appearance: Brown, frothy liquid Viscosity: 300 cPs Odour: Sweet solvent odour Contents: Blend of naphthenic lubricants, petroleum wax, bitumens, polyisobutylenes, xylene, white spirit, viscosity improvers, extreme pressure additives, corrosion inhibitors, hydrocarbon propellants Chlorination: Non-chlorinated Flash point: <0°C Solubility: Insoluble in water Temperature range: For use at ambient temperatures Relative density: 0.840 Flammability: Extremely flammable Storage: Store below 50°C Application: Shake well; spray directly onto the tool area; avoid hot surfaces and open flames Disposal: In accordance with local and national regulations

Read more less

Liqui Moly Gear Oil 75W-90 is a fully synthetic, high-performance gear oil formulated for motorcycle transmissions and final drives operating under extreme conditions. Compliant with API GL-5 and MIL-L 2105 C/D specifications, it ensures smooth gear shifting, excellent wear protection, and optimal performance across a wide temperature range. Product Features: Fully synthetic formulation for high-pressure applications Excellent wear protection and corrosion resistance Ensures smooth and precise gear shifting Wide viscosity range for consistent performance Reduces transmission noise and enhances efficiency Compatible with standard sealing materials Technical Specifications: SAE viscosity grade: 75W-90 API classification: GL-5 Density at 15°C: 0.855g/cm³ Viscosity at 40°C: 80.9mm²/s Viscosity at 100°C: 14.3mm²/s Viscosity index: 184 Pour point: –60°C Flash point: 190°C Application Information: Suitable for highly stressed motorcycle transmissions and final drives requiring API GL-5 gear oil. Ensure compatibility with manufacturer specifications

Read more less

Liqui Moly Gear Oil HD 150 is a fully synthetic transmission oil specifically developed for the primary chain drives and clutches of Harley-Davidson motorcycles. Its formulation ensures optimal lubrication across all temperature ranges and provides exceptional pressure resistance, making it ideal for demanding riding conditions. Product Features: High pressure-absorption capability Excellent low-temperature behaviour Very compatible with seals High wear resistance High resistance to ageing Technical Specifications: ISO viscosity class: VG 150 Density at 15°C: 0.855g/cm³ Viscosity at 40°C: 156.3mm²/s Viscosity at 100°C: 21.3mm²/s Viscosity index: 161 Pour point: –42°C Flash point: 230° Application Information: Designed for use in primary chain drives and clutches of most Harley-Davidson models manufactured between 1984 and 2010. Not suitable for models with primary belt drives. Always follow the manufacturer's instructions for application.

Read more less

Liqui Moly Gear Oil 80W-90 is a high-performance mineral-based gear oil formulated for motorcycle transmissions and final drives requiring API GL-4 specification. Manufactured from carefully selected base oils and multifunctional additives, it offers excellent wear protection, high pressure absorption capability, and outstanding thermal stability, ensuring reliable performance under normal to high load conditions. Product Features: High wear resistance for extended component life Superior pressure-absorption capability Reduces running noise for smoother operation Excellent performance across a wide temperature range High resistance to ageing and oxidation Compatible with common sealing materials Technical Specifications: SAE viscosity grade: 80W-90 API classification: GL-4 Density at 15°C: 0.895g/cm³ Viscosity at 40°C: 143mm²/s Viscosity at 100°C: 14.5mm²/s Viscosity index: 100 Pour point: –30°C Flash point: 220°C Colour: Light brown Application Information: Suitable for use in motorcycle transmissions and final drives operating under normal to high load conditions where an API GL-4 gear oil is specified. Ensure compatibility with manufacturer recommendations.

Read more less

Liqui Moly Motorbike HD Synth 20W-50 Street is a fully synthetic engine oil formulated for air- and water-cooled four-stroke motorcycle engines. It is particularly suitable for Harley-Davidson V-twin engines requiring a 20W-50 viscosity grade. This oil ensures optimal lubrication, high engine cleanliness, and excellent wear protection under all operating conditions, including extreme temperatures. Product Features: Fully synthetic formulation for superior performance Stable viscosity and resistance to ageing Excellent wear resistance and corrosion protection High engine cleanliness and thermal stability Suitable for engines with or without wet clutches Meets API SN PLUS and JASO MA2 specifications Recommended for Harley-Davidson H-D 360 Motor Cycle Oil 62600042 Technical Specifications: SAE viscosity grade: 20W-50 Density at 15°C: 0.850?g/cm³ Viscosity at 40°C: 140.0?mm²/s Viscosity at 100°C: 20.0?mm²/s Viscosity index: 165 Pour point: –36°C Flash point: 250°C Evaporation loss (Noack): 4.0% Total base number: 7.0mg KOH/g Sulfate ash: 0.8g/100g Application Information: Designed for year-round use in road, off-road, and racing motorcycles operating under normal to extreme conditions. Particularly suitable for Harley-Davidson V-twin engines requiring a 20W-50 synthetic motor oil. Ensure the product is used undiluted for optimal effectiveness.

Read more less

Liqui Moly Motorbike HD Synth 20W-50 Street is a fully synthetic engine oil engineered for air- and water-cooled four-stroke motorcycles, particularly suited for Harley-Davidson V-twin engines. Its formulation ensures optimal lubrication, high engine cleanliness, and excellent wear protection under all operating conditions, including extreme temperatures. Product Features: Fully synthetic formulation for superior performance Stable viscosity and resistance to ageing Excellent wear resistance and corrosion protection High engine cleanliness and thermal stability Suitable for engines with or without wet clutches Meets API SP and JASO MA2 specifications Recommended for Harley-Davidson H-D 360 Motor Cycle Oil 62600042 Technical Specifications: SAE viscosity grade: 20W-50 Density at 15°C: 0.850g/cm³ Viscosity at 40°C: 140.0mm²/s Viscosity at 100°C: 20.0mm²/s Viscosity index: 165 Pour point: –36°C Flash point: 250°C Evaporation loss (Noack): 4.0% Total base number: 7.0mg KOH/g Sulfate ash: 0.8g/100g Application Information: Designed for year-round use in road, off-road, and racing motorcycles operating under normal to extreme conditions. Particularly suitable for Harley-Davidson V-twin engines requiring a 20W-50 synthetic motor oil. Ensure the product is used undiluted for optimal effectiveness.

Read more less

Liqui Moly MoS2 Shooter is a concentrated molybdenum disulfide (MoS2) oil additive engineered to reduce friction and wear in both 2-stroke and 4-stroke motorcycle engines. Its formulation enhances engine smoothness, lowers oil and fuel consumption, and helps prevent operational malfunctions. Compatible with catalytic converters, it is suitable for use in engines with wet multi-disc clutches, as well as in transmissions and final drives. Product Features: Minimises friction and reduces wear Enhances engine smoothness and operational reliability Lowers oil and fuel consumption Prevents operational malfunctions Compatible with catalytic converters Miscible with all commercially available motor and gear oils Technical Specifications: Base: MoS2 in mineral oil Colour: Black Density at 20°C: 0.903g/cm³ Viscosity at 40°C: 95?mm²/s Particle fineness of MoS2: 0.3µm Flash point: 201°C Volume: 20ml Application Information: 4-stroke engines and transmissions: Add 20ml (1 tube) per 1litre of oil at each oil change. 2-stroke engines (mixture lubrication): Add 10ml per 10litres of fuel mixture. 2-stroke engines (separate lubrication): Add 20ml per 1litre of 2-stroke oil. Shake well before use

Read more less

Liqui Moly LM 40 Multi-Purpose Spray is a versatile maintenance solution designed for a wide range of applications in automotive, industrial, and household settings. Its advanced formula offers excellent lubrication, corrosion protection, and water displacement properties, ensuring optimal performance and longevity of mechanical components. Product Features: Excellent penetration properties for hard-to-reach areas Displaces moisture, aiding in the prevention of electrical failures Provides long-lasting corrosion protection Loosens rusted or seized components Reduces friction and wear on moving parts Safe for use on plastics, paints, metals, and wood Silicone-free formulation Pleasant coconut fragrance Application Information: Suitable for lubricating and protecting components such as hinges, locks, bolts, switches, handles, Bowden cables, vehicle antennas, and more. To apply, spray directly onto the surface and allow it to take effect. The spray can be used in any orientation, including upside down, for added convenience.

Read more less

Liqui Moly LM 40 Multi-Purpose Spray is a versatile maintenance solution designed for a wide range of applications in automotive, industrial, and household settings. Its advanced formula offers excellent lubrication, corrosion protection, and water displacement properties, ensuring optimal performance and longevity of mechanical components. Product Features: Excellent penetration properties for hard-to-reach areas Displaces moisture, aiding in the prevention of electrical failures Provides long-lasting corrosion protection Loosens rusted or seized components Reduces friction and wear on moving parts Safe for use on plastics, paints, metals, and wood Silicone-free formulation Pleasant coconut fragrance Technical Specifications: Volume: 200 ml Density at 20°C: 0.817 g/cm³ Net weight: 0.14 kg Gross weight: 0.217 kg Application Information: Suitable for lubricating and protecting components such as hinges, locks, bolts, switches, handles, Bowden cables, vehicle antennas, and more. To apply, spray directly onto the surface and allow it to take effect. The spray can be used in any orientation, including upside down, for added convenience.

Read more less

Liqui Moly Multi-Spray Plus 7 is a versatile, silicone-free maintenance spray designed for a wide range of applications across automotive, industrial, and household settings. This product combines excellent corrosion protection, rust removal, water displacement, and superior lubrication properties. It is safe for use on plastics, paints, metals, and wood, making it suitable for various components such as hinges, locks, cables, and electrical systems. Product Features: Displaces moisture, aiding in the starting of wet motors Protects electrical systems by eliminating leakage currents and preventing short circuits Loosens rusted or seized components Provides long-lasting lubrication to moving parts Offers excellent corrosion and oxidation protection Maintains rubber parts, preventing freezing Eliminates squeaks and creaks Neutral to plastics, paints, metals, and wood Application Information: Suitable for use in workshops, homes, gardens, and industrial environments. Ideal for lubricating and protecting components such as hinges, locks, cables, tools, and electrical systems. To apply, spray directly onto the surface from the aerosol can.

Read more less

Liqui Moly Fork Oil 7.5W Medium/Light is a fully synthetic suspension fluid designed for motorcycles, mopeds, autocycles, and other two-wheeled vehicles. Formulated with special synthetic base oils and additives, it ensures optimal drivability and damping performance. This oil provides excellent corrosion and wear protection, prevents foam formation and seal hardening, and extends the service life of suspension components. Product Features: Fully synthetic formulation for universal use Special synthetic base oils and additives for optimal drivability and damping Prevents foam formation and seal hardening Excellent corrosion and wear protection Extends the service life of suspension components Suitable for telescopic forks and shock absorbers Technical Specifications: SAE viscosity: 7.5W Volume: 500 ml Part Number: 3099 GTIN: 4100420030994 Application Information: Designed for universal use in telescopic forks and shock absorbers on motorcycles, mopeds, autocycles, and other two-wheeled vehicles. Follow the manufacturer's instructions for application.

Read more less

Liqui Moly Foam Filter Oil is a specialised lubricant designed for wetting foam air filters in motorcycles and off-road vehicles. Its high adhesive properties ensure effective trapping of dust and dirt, even under extreme operating conditions, thereby preventing engine damage and promoting optimal airflow for maximum engine performance. Product Features: Special oil formulated for wetting foam air filters Excellent adhesion to filter surfaces Effectively traps dust and dirt, preventing engine wear Water-repellent properties Does not resinify or foam Blue colour aids in uniform application Suitable for all two-stroke and four-stroke motorcycles with air or water-cooled engines using foam air filters Application Instructions: Pour the Foam Filter Oil into a suitable container. Remove coarse contaminants from the foam air filter by gently knocking it out. Immerse the foam air filter in the oil and thoroughly massage it to ensure complete saturation. Allow the filter to dry for 10 to 15 minutes before installation. Ensure the working area is well-ventilated during application.

Read more less

Liqui Moly DOT 4 Brake Fluid is a high-performance synthetic hydraulic fluid formulated for use in modern disc and drum brake systems, including ABS, as well as clutch systems. It offers exceptional thermal stability and moisture resistance, ensuring consistent braking performance even under extreme conditions. Specifications Volume: 500ml Dry boiling point: >260°C Wet boiling point: >155°C Viscosity at -40°C: <1,800mm²/s Density at 20°C: 1.01–1.07g/cm³ pH value: 7.0–11.5 Flash point: >100°C Colour: Amber to colourless Shelf life: 24 months (sealed container) Standards and Approvals FMVSS 116 DOT 3 and DOT 4 ISO 4925 Class 3 & 4 SAE J1703 / J1704 Application Information Suitable for hydraulic brake and clutch systems requiring DOT 3 or DOT 4 fluid Compatible with all standard brake fluid bleeding tools Miscible with high-quality synthetic brake fluids; optimal performance when used exclusively Ideal for systems with high safety and performance demands, including ABS-equipped vehicles Note: Always follow the vehicle manufacturer's recommendations. Avoid contact with painted surfaces; in case of spillage, rinse immediately with water.

Read more less

Liqui Moly DOT 5.1 Brake Fluid is a synthetic, glycol-based hydraulic fluid engineered for high-performance braking systems. It offers superior thermal stability and moisture resistance, ensuring consistent braking performance even under extreme conditions. This fluid is compatible with all conventional brake fluid bleeding devices and is suitable for vehicles equipped with ABS, ESP, and ASR systems. Specifications Volume: 250ml Dry boiling point: >260°C Wet boiling point: >180°C Viscosity at -40°C: ≤900mm²/s Density at 20°C: 1.02–1.07g/cm³ pH value: 7.0–10.0 Flash point: >100°C Colour: Amber Shelf life: 24 months (sealed container) Application Information Suitable for all disc and drum brake systems, including ABS-equipped vehicles Compatible with all standard brake fluid bleeding tools Miscible with high-quality synthetic brake fluids; optimal performance when used exclusively Recommended for vehicles requiring DOT 3, DOT 4, or DOT 5.1 fluids Note: Always follow the vehicle manufacturer's recommendations. Avoid contact with painted surfaces.

Read more less

Liqui Moly DOT 4 Brake Fluid is a premium synthetic hydraulic fluid formulated for use in modern disc and drum brake systems, including those equipped with ABS, as well as clutch systems. It maintains consistent performance across a broad temperature range and resists moisture absorption to extend system service life. Specifications Volume: 250ml Boiling point (dry): >260°C Boiling point (wet): >155°C Viscosity at -40°C: <1,800mm²/s Density at 20°C: 1.01–1.07g/ml pH value: 7.0–11.5 Flash point: >90°C Colour: Amber to colourless Shelf life: 24 months (sealed) Application Information Suitable for hydraulic brake and clutch systems requiring DOT 3 or DOT 4 fluid Compatible with all standard brake fluid bleeding tools Not to be mixed with mineral oil-based fluids Ideal for systems with high safety and performance demands, including ABS-equipped vehicles Always follow the manufacturer's recommendations for service intervals and fluid types. Avoid contact with painted surfaces.

Read more less

Liqui Moly Brake Fluid DOT 3 is a synthetic brake fluid formulated from glycol ethers and alkyl polyglycols. It contains corrosion inhibitors to protect metallic brake components and reduce oxidation at elevated temperatures. This brake fluid maintains high wet and dry boiling points, ensuring safe braking performance even after moisture absorption over extended use. It is suitable for use in all disc and drum brake systems, as well as clutch systems requiring a synthetic brake fluid of this specification. Additionally, it is compatible with ABS brake systems. Product Features: High wet and dry boiling points for enhanced safety Excellent protection against steam bubble formation Superior low-temperature performance Outstanding viscosity-temperature behaviour Excellent compatibility with elastomers Provides high lubricity for all moving components in hydraulic brake circuits High thermal stability throughout its service life Miscible and compatible with high-quality synthetic brake fluids Technical Data: Dry boiling point: >210°C Wet boiling point: >140°C Viscosity at –40°C: ≤1500mm²/s Viscosity at 100°C: ≥1.5mm²/s pH value: 7.0–11.5 Colour: Yellow Application Information: Suitable for all disc and drum brake systems, as well as motor vehicle clutch systems requiring synthetic brake fluid Compatible with conventional brake fluid bleeding devices Miscible with all high-quality synthetic brake fluids; optimal performance achieved when used alone Recommended to change brake fluid in accordance with vehicle manufacturer's specifications For optimal performance and safety, always adhere to the manufacturer's recommendations and service intervals.

Read more less

Liqui Moly Brake Fluid DOT 3 is a synthetic brake fluid formulated from glycol ethers and alkyl polyglycols. It contains corrosion inhibitors to protect metallic brake components and reduce oxidation at elevated temperatures. This brake fluid maintains high wet and dry boiling points, ensuring safe braking performance even after moisture absorption over extended use. It is suitable for use in all disc and drum brake systems, as well as clutch systems requiring a synthetic brake fluid of this specification. Additionally, it is compatible with ABS brake systems.  Product Features: High wet and dry boiling points for enhanced safety Excellent protection against steam bubble formation Superior low-temperature performance Outstanding viscosity-temperature behaviour Excellent compatibility with elastomers Provides high lubricity for all moving components in hydraulic brake circuits High thermal stability throughout its service life Miscible and compatible with high-quality synthetic brake fluids Technical Data: Dry boiling point: >210°C Wet boiling point: >140°C Viscosity at –40°C: ≤1500mm²/s Viscosity at 100°C: ≥1.5mm²/s pH value: 7.0–11.5 Colour: Yellow  Application Information: Suitable for all disc and drum brake systems, as well as motor vehicle clutch systems requiring synthetic brake fluid Compatible with conventional brake fluid bleeding devices Miscible with all high-quality synthetic brake fluids; optimal performance achieved when used alone Recommended to change brake fluid in accordance with vehicle manufacturer's specificationsy, always adhere to the manufacturer's recommendations and service intervals.

Read more less

Liqui Moly Motorbike Gear Oil 10W-30 is a high-performance, high-pressure gear oil formulated using carefully selected base oils and multifunctional additives. Designed for motorcycle transmissions and final drives operating under normal to high loads, it offers excellent lubrication, wear protection, and thermal stability. This gear oil ensures smooth gear shifting and reduces running noise, making it suitable for a wide range of applications. Product Features: High-pressure absorption capability for demanding applications Excellent viscosity-temperature behaviour ensures consistent performance Minimises wear and reduces running noise Outstanding resistance to ageing and oxidation Compatible with all standard seal materials Suitable for use in a variety of transmissions and final drives Technical Data: Density at 15°C: 0.870g/cm³ Viscosity at 40°C: 75.5mm²/s Viscosity at 100°C: 11.6mm²/s Viscosity Index: 147 Pour Point: –33°C Flash Point: 226°C Total Base Number: 6.7mg KOH/g Evaporation Loss (Noack): 12.9% Application Information: Suitable for motorcycle transmissions and final drives operating under normal to high loads Can be mixed with all branded gear oils; however, optimal performance is achieved when used unmixed Always follow the transmission manufacturer's instructions For optimal performance and protection, adhere to the manufacturer's recommended service intervals and specifications.

Read more less

Liqui Moly Brake Fluid SL6 DOT 4 is a fully synthetic, high-performance brake fluid formulated from glycol ethers and boric acid esters. It is specifically engineered for modern hydraulic brake and clutch systems, particularly those equipped with electronic stability control systems such as ESP, ABS, and ASR. The fluid maintains high wet and dry boiling points, ensuring reliable braking performance even after moisture absorption over extended periods. Its low viscosity at low temperatures facilitates rapid response times in electronic braking systems. Product Features: High thermal stability with dry boiling point ≥ 265?°C Wet boiling point ≥ 180?°C for consistent performance Low viscosity at –40?°C (≤ 700?mm²/s) for optimal ABS/ESP function Excellent elastomer compatibility to protect seals Effective corrosion inhibitors to safeguard system components Miscible with high-quality synthetic brake fluids Technical Data: Density at 20°C: 1.06–1.07g/cm³ Viscosity at 100°C: ≥ 1.5mm²/s Viscosity at 20°C: 11–14mm²/s pH value: 7–8 Flash point: > 126°C Colour: Light yellow, colourless Application Information: Suitable for all hydraulic brake and clutch systems requiring synthetic brake fluid Ideal for vehicles with ESP, ABS, and ASR systems Compatible with conventional brake fluid bleeding devices Optimal performance achieved when used without mixing with other fluids Recommended to change brake fluid in accordance with vehicle manufacturer's specifications For optimal safety and performance, always adhere to the manufacturer's recommendations and service intervals.

Read more less

Liqui Moly Brake Fluid DOT 4 is a synthetic brake fluid formulated from glycol ethers, alkyl polyglycols, and glycol ether esters. It contains corrosion inhibitors to protect metallic brake components and reduce oxidation at elevated temperatures, thereby preventing the formation of acid-containing decomposition products. This brake fluid is designed to extend the operating life of components in hydraulic brake and clutch systems. It maintains high wet and dry boiling points, ensuring safe braking performance even after moisture absorption over extended use. Special moisture scavengers help prevent the formation of steam bubbles, making it suitable for use in ABS brake systems. Product Features: High wet and dry boiling points for enhanced safety Excellent protection against steam bubble formation Superior low-temperature performance Outstanding viscosity-temperature behaviour Excellent compatibility with elastomers Provides high lubricity for all moving components in hydraulic brake circuits High thermal stability throughout its service life Miscible and compatible with high-quality synthetic brake fluids  Technical Data: Dry boiling point: >260°C Wet boiling point: >165°C Viscosity at –40°C: ≤1400mm²/s Viscosity at 100°C: 2.0–2.6mm²/s Density at 20°C: 1.055–1.075g/cm³ pH value at 20°C: 7.5–9.0 Flash point: 125°C Colour: Yellow Application Information: Suitable for all disc and drum brake systems, as well as motor vehicle clutch systems requiring synthetic brake fluid Compatible with conventional brake fluid bleeding devices Miscible with all high-quality synthetic brake fluids; optimal performance achieved when used alone Recommended to change brake fluid annually or as specified by the vehicle manufacturer  For optimal performance and safety, always adhere to the manufacturer's recommendations and service intervals.

Read more less

Liqui Moly Motorbike Gear Oil 75W-140 GL5 VS is a fully synthetic, high-performance gear oil designed for motorcycle transmissions and final drives subjected to extreme loads. Manufactured from high-grade synthetic base oils and additives, it ensures optimal lubrication, wear protection, and smooth gear shifting even under demanding conditions.  Product Features: Fully synthetic formulation for high-pressure applications Ensures precise gear shifting under extreme conditions Excellent wear protection and corrosion resistance Reduces transmission noise Wide viscosity range for optimal performance across temperatures Complies with API GL5 specifications Application Information: Suitable for motorcycle transmissions and final drives operating under maximum load Mixable with all branded gear oils; optimal performance when used unmixed Always follow the transmission manufacturer's instructions  For optimal performance and protection, adhere to the manufacturer's recommended service intervals and specifications.

Read more less