PD International

The PD International OBH611 is a replacement CV joint for ATV and UTV drivetrain applications. It is designed to transmit drive through the axle assembly while accommodating the changing operating angles created by suspension and steering movement. Features Suitable for replacement use within ATV and UTV axle and driveshaft assemblies Allows rotational power transmission through an articulated drivetrain connection Cross-Reference OEM Part Numbers OBH611

Read more less

The PD International OBH610 ATV joint is a replacement CV joint for ATV and UTV drivetrain applications. It is used within axle and driveshaft assemblies to transmit drive while allowing the joint to articulate with suspension and steering movement. Features Replacement CV joint for ATV and UTV applications Suitable for use within axle and driveshaft assemblies Allows rotational drive to be transmitted through an articulating joint Cross-Reference OEM Part Numbers PD International: OBH610

Read more less

The PD International CVJ412 is a replacement constant velocity (CV) joint assembly for compatible Suzuki ATV rear drive applications. It is designed for the rear outer position, replacing a worn or damaged CV joint to restore correct power transmission through the drivetrain. Features Replacement CV joint assembly for Suzuki ATV applications Suitable for rear outer drivetrain installation Designed for use with the vehicle’s drive shaft and hub assembly Specifications Inner race spline count: 18 Inner race groove type: Internal CV housing spline count: 22 Housing diameter: 2.570 in Seal diameter: 1.890 in Spline diameter: 0.935 in Thread size: M18 x 1.5 mm Stub height: 4 1/16 in Cross-Reference OEM Part Numbers PD International: CVJ412 CJ412 OJ412 Vehicle Fitments Suzuki (Rear Outer) KingQuad 700 4x4 LT-A700X (2005-2007)

Read more less

The PD International CVJ411 is a replacement constant-velocity (CV) joint assembly for selected Suzuki ATV drivetrain applications. It is designed to replace the front outer CV joint and maintain drive transmission between the axle shaft and wheel assembly while accommodating suspension and steering movement. Features Fully assembled CV joint Suitable for front outer drivetrain installation Supplied with puncture-resistant CV boot Includes grease pack and two retaining clamps Intended for ATV drivetrain repair and replacement Cross-Reference OEM Part Numbers CVJ411 CJ411 Vehicle Fitments Suzuki (Front outer) LT-A700X KingQuad 700 4x4 (2005)

Read more less

The CVJ413 joint assembly is a replacement constant-velocity joint for compatible Suzuki ATV drivetrains, allowing drive to be transmitted through changing suspension and steering angles. It is supplied as a complete service kit for replacement of the existing CV joint assembly. Features Fully assembled outboard CV joint Includes heavy-duty puncture-resistant CV boot Supplied with grease pack and two retaining clamps Cross-Reference OEM Part Numbers PD International: CVJ413 Wild Boar / Motor Master: CVJ413 Moose Utility: 483-0213-0286 Vehicle Fitments Suzuki (Front outer) LT-F400F Eiger 400 4x4 Manual (2003-2004) LT-F500F Vinson 500 4x4 Manual (2003-2005)

Read more less

The PD International CVJ217 P2 CV joint assembly is a replacement rear outboard CV joint kit for the Yamaha YFM660F Grizzly 4x4. It provides a complete assembled CV joint for restoring drivetrain power transfer and includes the supporting components required for installation. Features Fully assembled CV joint Heavy-duty puncture-resistant CV boot Includes grease pack and two retaining clamps Supplied as a complete joint kit Suitable for rear outboard installation Cross-Reference OEM Part Numbers CVJ217 02130275 UPC: 685653857289 Vehicle Fitments Yamaha (Rear outer, left or right side) YFM660F Grizzly (2002)

Read more less

Replacement front axle assembly for selected Polaris ATV models, supplied as a complete axle/CV shaft assembly for direct replacement of the original driveline component. It is suitable for front left or front right installation on verified applications and is designed to install without modification. Features Fully assembled outboard CV joint Heavy-duty puncture-resistant CV boot and axle bar Direct OEM-style replacement requiring no modification for installation Some applications use a universal joint and yoke assembly or a fully assembled inboard CV joint Cross-Reference OEM Part Numbers 516-2010 PAXL-1007U PD-PAXL-1007U Vehicle Fitments Polaris (Front Left / Front Right) ATP 330 (2004) Magnum 330 2x4 (2003) Magnum 330 4x4 (2003-2004) Sportsman 400 (2004) ATP 500 (2004) Sportsman 500 HO (2004) Sportsman 600 (2003-2004) Sportsman 700 (2002-2004)

Read more less

The P2 ATV halfshaft is a complete front CV axle assembly designed as a direct-fit replacement for compatible Yamaha ATV drivetrains. It transfers drive to the front wheel while accommodating steering and suspension movement through its constant-velocity joints, and is supplied as a complete assembly for either the front-left or front-right position. Features Complete CV axle assembly for straightforward replacement Suitable for front-left or front-right installation Precision-machined splines and threads for correct fitment CV joints supplied pre-packed with molybdenum grease Secure boot clamps help maintain joint sealing Specifications Overall compressed length: 500 mm (19.69 in) Inboard spline count: 21 Outboard spline count: 27 Axle nut thread: M16 x 1.5 Axle nut hex size: 24 mm Axle nut locking type: cotter pin Inboard joint type: male Outboard joint type: conventional Inboard and outboard boot material: neoprene ABS tone ring: not included Cross-Reference OEM Part Numbers PAXL-1099 YAM-7013 5TE-F510F-00-00 5GH-2510J-00-00 0214-1701 AX7813 ATV-YA-8-309 8130203 4108022 UPC: 844084079435 Vehicle Fitments Yamaha (Front Left/Right) YFM350FA Bruin 350 4WD (2004-2006) YFM350FG Grizzly 350 4WD (2007-2011) YFM400 Grizzly 400 (2007-2008) YFM400 Kodiak 400 (2003-2006) YFM450FX Wolverine 450 4x4 (2006-2010)

Read more less

Part no 17-3049.PD (radhouse.co.uk) Kawasaki KVF360 Prairie (4x4) 2003-2005, KVF650 Prairie (4x4) 2002-2003, Outboard C.V joint kit PD International Part no PD-PACV-1023

Read more less

PD International CVJ710 P2 CV joint assembly is a heavy-duty replacement component for ATV and UTV drivetrain applications. It is designed to replace the original CV joint and restore reliable power transfer through the driveshaft, with verified applications including selected Kawasaki Bayou and Prairie 4x4 models. Features Heavy-duty replacement CV joint assembly Supplied as a complete joint kit with puncture-resistant CV boot, grease pack and two clamps Suitable for front outboard driveshaft applications Cross-Reference OEM Part Numbers CVJ710 CJ710 Vehicle Fitments Kawasaki (Front outer) KLF300 Bayou 4x4 (1989-2004) KLF400 Bayou 4x4 (1993-1999) KVF400 Prairie 4x4 (1997-2002)

Read more less

CVJ516 is a replacement front outboard CV joint assembly for selected Polaris ATV models. It is supplied as a complete joint kit for use in the drivetrain, allowing power to be transmitted through the front axle while accommodating steering and suspension movement. Features Fully assembled CV joint assembly. Includes CV boot, clamps and grease. Heavy-duty, puncture-resistant boot. Suitable for front outboard installation on the verified Polaris applications listed below. Cross-Reference OEM Part Numbers CVJ516 Vehicle Fitments Polaris (Front) ATP 330 (2004) Magnum 330 4x4 (2003-2004) Sportsman 400 (2004) ATP 500 (2004) Sportsman 500 HO (2004) Sportsman 600 (2003-2004) Sportsman 700 (2002-2004) Sportsman 700 EFI (2004)

Read more less

Part No. 17-3041.PD (radhouse.co.uk) ATV CV JOINT Polaris: Explorer 250/ 425 4X4 (02), Explorer 400 4X4 (99- 02), Explorer 500 4X4 (97), Magnum 500 2X4 (02), Scrambler 400 4X4 (99-02), Scrambler 500 4X4 (99-04), Sportsman 400/ 500 4X4 Front (02-04) Note. Rubber boot and clips not included.

Read more less

The Moose Racing CVJ512 CV joint assembly is a complete replacement constant-velocity joint for the rear driveline of selected Polaris ATVs. It is supplied fully assembled with the protective boot, clamps and grease required for installation, providing a direct replacement for compatible rear CV joint applications. Features Fully assembled CV joint ready for installation Heavy-duty, puncture-resistant protective boot Supplied with boot clamps and grease Sold individually Cross-Reference OEM Part Numbers CVJ512 0213-0051 P2 Vehicle Fitments Polaris (Rear) Sportsman 335 (2000) Sportsman 400 (2001-2002) Diesel 455cc (2000-2002) Sportsman 500 4x4 (1999) Sportsman 500 HO (2001-2002) Sportsman 500 HO RSE (2001) Sportsman 500 RSE (1999-2000) Worker 500 (1999)

Read more less

Part no 17-3038.PD (radhouse.co.uk) Polaris Big Boss 250 (6x6 - W/USA OB) 1992, Trail Boss (4x4 W/USA OB) 1992, Trail Boss 250 (4x4) 1991, 250 (4x4) 1993, 300 (4x4) 1996, 300 (4x4) (6x6) 1994, Trail Boss 350 (4x4 -W/USA OB) 1992, 350L (4x4) (6x6) 1993, 400L (6x6 - W/USA OB) 1995, 400L (4x4) (6x6) 1994, Sportsman 400 (4x4) 1994, Outboard C.V. Joint kit Overal Length 185mm PD International Part no PD-PACV-1006

Read more less

Part No. 17-3037.PD (radhouse.co.uk) Polaris: Big Boss 400 6X6 (97), Big Boss 500 6X6 (98-99), Explorer 300/ 400/ 425 4X4 (97-99), Expedition 325 4X4 (00- 02), Magnum 325/ 425/ 500 4X4 (00-02), Scrambler 400/ 500 4X4 (98-99), Sportsman 335/ 400/ 500 4X4 Front (99-00) Note. Rubber boot and clips not included.

Read more less

The CVJ311 P2 CV joint assembly is a replacement front outboard constant-velocity joint for selected Honda ATVs. It is designed to restore torque transfer and articulation at the wheel end of the front driveshaft where the original CV joint has become worn or damaged. Features Fully assembled CV joint Supplied with puncture-resistant CV boot Includes retaining clamps and grease for installation Suitable for front outboard driveshaft applications Cross-Reference OEM Part Numbers CVJ311 0213-0095 WE271070 Honda: 44250-HN8-A43 Honda: 44350-HN8-A43 Vehicle Fitments Honda (Front outboard) TRX500FA FourTrax Foreman Rubicon (2001-2007) TRX500FE FourTrax Foreman 4x4 ES (2005-2006) TRX500FGA FourTrax Foreman Rubicon GPScape (2004-2008) TRX500FM FourTrax Foreman 4x4 (2005-2006) TRX500TM FourTrax Foreman (2005-2006) TRX650FA FourTrax Rincon (2003-2005) TRX650FGA FourTrax Rincon GPScape (2004-2005) TRX680FA FourTrax Rincon (2006-2010) TRX680FGA FourTrax Rincon GPScape (2006-2009)

Read more less

The CVJ216 P2 CV joint assembly is a replacement constant velocity joint for selected Yamaha ATV front drivetrains. It is designed for the front outboard, wheel-side position, allowing drive to be transmitted through the front axle while accommodating steering and suspension movement. The assembly is supplied ready for installation with the protective boot and associated fitting components. Features Fully assembled replacement CV joint Front outboard, wheel-side application Protective puncture-resistant CV boot Supplied with clamps and CV joint grease Suitable for left- or right-hand front applications where specified Supplied individually Cross-Reference OEM Part Numbers CVJ216 Moose Utility: 0213-0099 UPC: 685653837144 Vehicle Fitments Yamaha (Front outboard) YFM350F Wolverine 4x4 (2001-2005) YFM350FA Bruin Auto 4x4 (2004-2006) YFM400F Kodiak 4x4 (2000-2006) YFM450 Grizzly 4x4 Auto (2007) YFM450F Kodiak Auto 4x4 (2003-2006) YFM450FX Wolverine 4x4 (2006-2010) YFM660F Grizzly 4x4 (2002)

Read more less

CVJ215 P2 is a heavy-duty constant velocity (CV) joint assembly for ATV driveline applications, designed to transmit drive through the axle while allowing the joint articulation required during vehicle operation. CVJ215 is identified as a replacement CV joint for Yamaha Grizzly 600 4x4 models. Features Heavy-duty replacement CV joint assembly for ATV/UTV driveline use. Allows torque transmission through the driveline while accommodating CV joint articulation. Cross-Reference OEM Part Numbers CVJ215 PD-PACV-1020 Vehicle Fitments Yamaha Grizzly 600 4x4 (1999-2001)

Read more less

Part no 17-3033 (radhouse.co.uk) Yamaha YFM600FW/H Grizzly (4x4) 1999-2001, Outboard C.V joint kit MOTO-MASTER B.V Part no CVJ215

Read more less

This CV joint assembly is an outer constant-velocity joint for Yamaha Grizzly YFM660 4x4 ATVs, designed to transmit drive through the axle while allowing for suspension and steering movement. It is supplied as a complete joint assembly and is suitable for front outer applications on 2003 models and front or rear outer applications on verified 2004–2008 models. Features Fully assembled heavy-duty CV joint Supplied with puncture-resistant CV boot, clamps and grease Suitable for left- or right-hand outer joint applications Cross-Reference OEM Part Numbers CVJ214 PD PACV-1014 0213-0098 UPC: 685653833047 Vehicle Fitments Yamaha (Front Outer) Grizzly YFM660 4x4 (2003-2008) Yamaha (Rear Outer) Grizzly YFM660 4x4 (2004-2008)

Read more less

Part No. 17-3028.PD (radhouse.co.uk) Yamaha: Timberwolf YFB250FW 4X4 (94-00), Big Bear YFM350FW 4X4 (89-99), Big Bear YFM400FW 4X4 (00-06), Wolverine YMF350X 4X4 (95-00), Kodiak YFM400FW 4X4 (93-99) Note. Rubber boot and clips not included.

Read more less