Unbranded
-
Unbranded Grip Wire Stainless Steel 450G 0.8mm Saftey Bolt Locking Wire MK-4035
Stainless steel safety locking wire designed for secure fastening applications such as handlebar grips or bolt wiring. Ideal for use in motorsports, aviation, or other mechanical settings where vibration may loosen components. Compatible with safety wire pliers for efficient installation. Features Stainless steel construction for durability and corrosion resistance Suitable for locking bolts, securing grips, and other fastenings Compatible with safety wire pliers [00-370] for quick application Specifications Roll Weight: 450g Diameter: 0.8 mm Material: Stainless steel Cross-Reference OEM Part Numbers 00-370 (safety wire pliers)
£32.34
-
Unbranded 17mm Combination Spanner
This 17 mm combination spanner is a hand tool used for tightening and loosening compatible fasteners in workshop and general maintenance applications. It is intended for everyday use where a compact spanner is needed for a tool bag or bench set, combining open-ended and ring-ended operation in a single tool. Features Combination spanner for general fastening and loosening tasks Suitable for workshop use or carrying in a tool bag Thin profile design polished finish Raised panel spanner pattern Specifications Size: 17 mm Construction: drop forged Heat treatment: hardened and tempered Material: chrome vanadium steel Make, type or appearance may vary between sizes Cross-Reference OEM Part Numbers Part number: 00-366.17
£11.70
-
Unbranded 9mm Combination Spanner
Part No.00-3610.9 (radhouse.co.uk) 9mm COMBINATION SPANNER Quality spanners suitable for workshop use or tool bag. Thin profile, mirror polished, raised panel spanner. Drop forged, hardened and tempered. Chrome vanadium steel combination spanner.
£9.54
-
Unbranded Epi Jam Nut Driver Epi E-338
EPI Jam Nut Drive Tool Application: ATV/UTV Compatible Brands and Models: Kawasaki: 300 Prairie 2x4/4x4 1999-2002, 400 Prairie 2x4/4x4 1999-2002 Polaris: All models (except 900 Ranger 2013-2016, 900 Ranger Crew 2014-2016, 900 RZR XP 4x4 2011-2014, 900 RZR XP 4 4x4 2012-2014, 900 RZR 2015-2016, 900 RZR 4 2015-2016, 900 RZR S 2015-2016, 900 RZR XC 2015-2016, 1000 RZR XP 2014-2016, 1000 RZR XP 4 2014-2016, 1000 RZR S 2016, RZR XP Turbo 2016, RZR XP 4 Turbo 2016. For these models, use EPI 578) Description: The EPI Jam Nut Drive Tool is specifically designed for removing the primary clutch jam nut in Kawasaki and Polaris ATV/UTV models. It provides a secure grip and precise control during the removal process, ensuring efficient maintenance and repair tasks. The EPI Jam Nut Drive Tool is an essential accessory for ATV and UTV enthusiasts and technicians, offering reliable performance and compatibility with a wide range of models.
£63.90
-
Unbranded Plastic Welding Diy Repair Kit Reinforcing Mesh Hot Staples
This plastic welding kit is intended for DIY plastic repairs, supplying a hot iron, plastic welder rods and reinforcing mesh for bonding and reinforcing damaged plastic components. Features Plastic welding kit for DIY plastic repairs Supplied with plastic welder rods and reinforcing mesh Suitable for repair and maintenance tasks across multiple settings Can be used on leather items for wrinkle removal Plated stainless steel pipe and flat tip with antioxidant surface treatment for corrosion resistance Soldering iron with anti-slip handle Stable performance with well-distributed heat Check images before ordering to avoid compatibility errors Installation required; professional assistance recommended if unsure Cross-Reference OEM Part Numbers 00-3361
£41.94
-
Unbranded Stud Extractor Set 4pcs
Part No. 00-308 (radhouse.co.uk)
£29.94
-
Unbranded 3-PIECE Magnetic Tool Holder Bar Set 200mm 300mm 460mm Wall Mounted Steel Rack
This 3-piece magnetic tool holder set includes bars of 200mm, 300mm, and 460mm in length, designed for organizing and storing metal tools efficiently in garages or workshops. Constructed with a combination of painted carbon steel, ferrite magnets, and an ABS base, each bar features a strong permanent magnetic hold with a capacity of up to 10kg. The bars are easy to mount using the pre-drilled holes and included hardware, offering a durable and reliable storage solution. Features Set includes 3 magnetic tool holder bars in different lengths: 200mm, 300mm, and 460mm Super strong permanent magnets with 10kg holding capacity Easy wall mounting with pre-drilled holes Mounting hardware included Suitable for organizing and accessing frequently used metal tools Specifications Material: A3 steel shell, ferrite magnet, ABS base Surface Treatment: Black paint Magnetic Type: Permanent magnets, non-demagnetizing
£33.84
-
Unbranded Scriber Pick Hard Steel
Part No. 00-182 (radhouse.co.uk) Scriber Pick. Double-ended, hardened steel engineers scriber. Knurled and blackened grip.
£10.53
-
Unbranded Titanium Twist Drill Bit Set 1.5mm - 6.5mm 13PCS
13pcs Twist Drill Bit Set Features: 1. Straight round shank. 2. high speed steel, super hard, white steel and titanium plated. 3. Smooth surface to reduce friction, sharp blade for fast drilling hole. 4. Wear-resistant with long service time. 5. Perfect for drilling metals and wood, such as: aluminum, iron, stainless steel. 6. Suit to use with hand drill chuck, bench drill, radial drill etc. Specification: Meterial: High speed steel Coating: Titanium Coated Diameter: 1.5-6.5mm Shank: Round Application: Stainless steel, steel, iron, aluminum and other metal pipes job openings. Note
£15.59
-
Unbranded Oil Filter Wrench 1/2 Drive
Part No. 00-164.FI (radhouse.co.uk)
£10.12
-
Unbranded Tap Wrench & Tap Kit 3-8mm
TAP WRENCH & TAP KIT 3-8mm Features: Please check the image before ordering to avoid mistakes.
£22.37
-
Unbranded Hss Tap M8 Plug / Bottom Thread 8mm x 1.25 Each
Part No. 00-160.08.1 (radhouse.co.uk) M8x1.25mm. M8 PLUG/BOTTOM TAP COARS
£13.65
-
Unbranded FLYWHEEL PULLER 30mm x 1.5mm RH-External Female 25mm DEPTH, Same as offer 00-7889.DR just fits more models
Flywheel Puller 30mm x 1.5-RH-External Female 1 Inch Internal Depth. Flywheel Puller 30mm x 1.5-RH-External Female 1 Inch Internal Depth. Flywheel puller for most Suzuki GS1100/1150 (81-85), all late model street singles, twins, and multi-cylinder models. 1981 Suzuki GS1100EX 1981 Suzuki GS1100SX 1981 Suzuki GS1150 1982 Suzuki GS1100EZ 1982 Suzuki GS1100GK2Z 1982 Suzuki GS1100GKZ 1982 Suzuki GS1100GLZ 1982 Suzuki GS1100GZ All pullers made to precise standards equal to factory original tools or better. Each tool and bolts are black oxide plated for rust protection. Tool hardness is softer than the motorcycle part to prevent damage to expensive crankshafts and flywheels. 5/8in. fine thread bolts used in all pullers. Tips on use. - Make sure the flywheel thread is clean of dirt and not damaged before screwing the puller in. - Use copper grease on the puller threads, for long life. - Make sure the puller is fully screwed into the flywheel. - After tightening use a hammer on the centre and tap to jolt free [not always need]. - If using old flywheel pullers make sure the threads are in good condition before use to avoid damage to flywheel. Part No. 00-093 (radhouse.co.uk)
£42.57
-
Unbranded Wooden Hand Valve Lapping Grinding Tool Set 35/28 & 16/21
VALVE TOOL SET. 35/28 & 16/21 Part No. 00-089.2 (radhouse.co.uk)
£12.48
-
Unbranded PORTING FILE Diamond SET 10pcs
The Porting File Set includes ten diamond-coated needle files designed for precision work on cylinder heads and engine cylinders. These curved files provide high strength, sharpness, and wear resistance, making them suitable for detailed shaping and finishing in engine porting and other fine metalworking tasks. Features Three curved files suitable for cylinder head and cylinder work Diamond needle files with sharp cutting ability and high wear resistance Designed for precision shaping in tight or contoured areas High strength and good physical durability Specifications Material: Plating emery Handle shell colour: Red Handle dimensions: 4×160mm Quantity: 10 pieces Net weight: Approx. 161g
£27.70
-
Unbranded Bearing & Seal Driver Set
Part No. 00-052.D (radhouse.co.uk)
£52.52
-
Unbranded Taper Reamer 3-13mm T Handle Tool Hand Or Drill Use
This tapered reamer drill bit with a hex shank and T-handle is designed for controlled hand reaming and chamfering from 3 mm to 13 mm. Featuring a 6-flute cutting profile and handle grips for added leverage, it is intended to help keep holes round while forming tapered and inverted-taper holes—please check the product images before ordering to avoid mistakes. Features T-handle with handle grips for extra leverage and control 6-flute design to support smooth hand reaming and help maintain round holes Suitable for tapering holes for bridge pins or endpins Suitable for taper holes in wood boards, wood sink holes, chamfers, and inverted tapers Supplied as tapered reamer only; other pictured accessories are not included Easy to install; professional installation recommended if unsure Specifications Size range: 3–13 mm Total length: approx. 128 mm (5.04 in) Shank type: hex shank Material: hardened carbon steel Type: core drill bit Model number: 3mm–13mm Bridge Pin Hole Hand Held Reamer T Handle Tapered
£17.94
-
Unbranded Tapered Hand Reamer 4-13mm
Part No. 00-039.FI (radhouse.co.uk)
£23.37
-
Unbranded Hang Up Auxiliary Fuel Tank 2 Litre
Package Included: 1x Auxiliary Fuel Tank (with Fuel Hose and petcock) Part No. 00-0321.AAA (radhouse.co.uk) Note: For use with Auxiliary workshop stand 33-522, easy to attach the tank and wheel it around the workshop. Cross Reference Numbers Only: UP-12184, 08-0032.
£45.96
-
Unbranded Fork Cap Wrench And Sleeve Kit 35mm 49mm 50mm
Front Shock Absorber Remover Tool Material: Aluminum alloy FOR KYB/SHOWA/WP Features: Durable, Portable, Easy to Use Includes Torque Wrench Slot Features: Made from high-hardness aluminum alloy for corrosion resistance and rust prevention. CNC machined for precise fit and tolerance, 6061 aluminum material is non-marring on fork caps. Suitable for removing fork caps and compression valves from the inner cartridge. Delicate and lightweight for easy portability. Comes with replaceable fork cap wrench in 4 specifications (35mm, 49mm, 50(6)mm, 50(8)mm) and compression valve sleeve in 3 specifications. Compatible with KTM XC-W/EXC 125/150/250/350/450/500, SX/SXF/XC/XC-F, HUSQVARNA TC125/250, FC250/350/450, and other front forks. Package Includes: 1 x Front Shock Absorbing Top Cover Disassembly Kit Part No. 00-0158.AAA [radhouse.co.uk]
£127.50
-
Unbranded 12pcs Brass Polishing Wire Brush Kit Paint Rust Remover Grinding Tool
12PCS Brass Polishing Wire Brush Kit Paint Rust Remover Grinding Tool Features: Unique tools and accessories with a wide range of uses. Fine brush with meticulous workmanship. Hexagonal handle for quick change, suitable for power drill, impact drill, and stamping machine. Includes a 150mm long quick-connect self-locking extension rod for enhanced convenience. Ideal for automotive, manufacturing, machining, and other applications, designed for cleaning, polishing, and removing paint/rust. Specifications: Type: 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, and 19 mm in diameter. Rod Material: Galvanized iron wire. Extension Rod Length: 150mm/5.9in Total Length of Brush: Approximately 100mm/3.9in Working Length: About 50mm/2in Part No. 00-0156.AAA
£37.14
-
£43.33
-
Unbranded Grinding Head Sanding Wheels 100pcs Kit
Distributed by: radhouse.co.uk
£26.19
-
Unbranded Solder Pot Tin Stove Furnace Soldering Pot 220V 50HZ 110-550 Degrees.
220V 150/160W Adjustable Temperature Solder Pot Tin Stove Melting Furnace De-soldering Tools Perfect for soldering nipples onto control cables, simply dip them into the hot solder for fast and easy application. Features: Easy installation; professional assistance recommended if unsure.
£39.54
