1800w/2.5hp 48V 50A Electric Motor Kit Universal Buggy Bike Quad Moto Diy

Description

This 48 V brushless DC drive set pairs a high-speed MY1020 motor with a compatible two-mode controller for e-bike and light EV applications. The motor outputs 1800 W at a rated 4300 r/min and is CE approved. The controller supports automatic motor phase identification, multiple brake signal types, three-speed modes, cruise control, reverse, PAS input, throttle interface and anti-theft integration. Further details and wiring guidance can be found in the instructions inside.

Features

  • Brushless DC motor with hall sensors
  • CE approved motor
  • Two-mode brushless controller with automatic motor phase angle identification (learning wires)
  • Brake input compatibility: low-level and high-level electrical signals
  • Three-speed gear selection (shift and jog modes)
  • Constant-speed cruise control
  • Reverse gear input
  • PAS (pedal assist) input
  • Accelerator (throttle) handle interface with regulated sensor supply
  • Electric door lock input and conduction wire for key switch circuits
  • Anti-theft alarm power and alarm signal interfaces
  • Outputs for diagnostic meters: multiple-data meter, hall meter, phase meter
  • Headlight/horn/tail-light supply not driven directly by the controller; requires vehicle harness or DC converter as per included guidance
  • Basic wiring and debugging instructions included

Specifications

  • Motor model: MY1020
  • Motor voltage: 48 V DC
  • Motor output: 1800 W
  • Rated motor speed: 4300 r/min
  • Controller nominal voltage: 48 V
  • Controller maximum current: 40–50 A

Wiring

  • Hall sensor pinout (5-pin): red-black (+5 V), yellow/green/blue (hall signals), black (GND)
  • Motor phase wires: yellow, green, blue
  • Power input leads: red (Power+), black (Power–)
  • Electric door lock: orange (Electric Door Lock +), green (conduction wire)
  • Low-level brake: yellow-black (signal), black (GND)
  • High-level brake: purple (signal), black (GND)
  • Shift three-speed gear: pink (high-speed), grey (low-speed), black (GND)
  • Jog three-speed gear: green (variable speed), black (GND)
  • Cruise control: blue-white (cruise signal), black (GND)
  • Accelerator (throttle) connector: red-white (+4.3 V to +5 V sensor supply), green-white (signal), black (GND)
  • Reverse gear: blue-black (signal), black (GND)
  • PAS connector: sky blue (PAS signal), red-black (+5 V), black (GND)
  • Anti-theft alarm power: red (Power+), black (Power–)
  • Anti-theft alarm signal: orange (electric door lock), blue-red (alarm signal), brown-white (phase signal)
  • Battery: thick black (power negative), thick red (power positive)
  • Motor: thick yellow/green/blue (motor phases)
  • Motor hall sensor: 5-pin as specified above
  • Ignition (key) switch: thin red (VCC), thin blue
  • Indicator: thin red (indicator power output), thin black (indicator negative)
  • Brake: thin yellow (brake signal), thin black (negative power) or purple (high-level brake signal), black (GND)
  • Speed governor (throttle): thin blue (handlebar signal input), thin black (negative power), thin red (5 V positive power)
  • Charge port: thin red (charge input power positive), thin black (power negative)
  • Brake light: thin red (power positive), thin black (power negative)
  • Lighting note: for 12 V vehicle lights, use a DC converter from battery voltage (e.g. 24–84 V to 12 V) as illustrated in the included instructions

1800w/2.5hp 48V 50A Electric Motor Kit Universal Buggy Bike Quad Moto Diy

Product form

This 48 V brushless DC drive set pairs a high-speed MY1020 motor with a compatible two-mode controller for e-bike and... Read more

12 in stock 1-2 business days

£259.23 Incl. VAT

    • Guaranteed secure & safe checkout.

      shop pay

    SKU: 44-8808
    Barcode: 0120000061754

    • Free shipping on all orders above £75
    • No hassle returns within 30 days

    Description

    This 48 V brushless DC drive set pairs a high-speed MY1020 motor with a compatible two-mode controller for e-bike and light EV applications. The motor outputs 1800 W at a rated 4300 r/min and is CE approved. The controller supports automatic motor phase identification, multiple brake signal types, three-speed modes, cruise control, reverse, PAS input, throttle interface and anti-theft integration. Further details and wiring guidance can be found in the instructions inside.

    Features

    • Brushless DC motor with hall sensors
    • CE approved motor
    • Two-mode brushless controller with automatic motor phase angle identification (learning wires)
    • Brake input compatibility: low-level and high-level electrical signals
    • Three-speed gear selection (shift and jog modes)
    • Constant-speed cruise control
    • Reverse gear input
    • PAS (pedal assist) input
    • Accelerator (throttle) handle interface with regulated sensor supply
    • Electric door lock input and conduction wire for key switch circuits
    • Anti-theft alarm power and alarm signal interfaces
    • Outputs for diagnostic meters: multiple-data meter, hall meter, phase meter
    • Headlight/horn/tail-light supply not driven directly by the controller; requires vehicle harness or DC converter as per included guidance
    • Basic wiring and debugging instructions included

    Specifications

    • Motor model: MY1020
    • Motor voltage: 48 V DC
    • Motor output: 1800 W
    • Rated motor speed: 4300 r/min
    • Controller nominal voltage: 48 V
    • Controller maximum current: 40–50 A

    Wiring

    • Hall sensor pinout (5-pin): red-black (+5 V), yellow/green/blue (hall signals), black (GND)
    • Motor phase wires: yellow, green, blue
    • Power input leads: red (Power+), black (Power–)
    • Electric door lock: orange (Electric Door Lock +), green (conduction wire)
    • Low-level brake: yellow-black (signal), black (GND)
    • High-level brake: purple (signal), black (GND)
    • Shift three-speed gear: pink (high-speed), grey (low-speed), black (GND)
    • Jog three-speed gear: green (variable speed), black (GND)
    • Cruise control: blue-white (cruise signal), black (GND)
    • Accelerator (throttle) connector: red-white (+4.3 V to +5 V sensor supply), green-white (signal), black (GND)
    • Reverse gear: blue-black (signal), black (GND)
    • PAS connector: sky blue (PAS signal), red-black (+5 V), black (GND)
    • Anti-theft alarm power: red (Power+), black (Power–)
    • Anti-theft alarm signal: orange (electric door lock), blue-red (alarm signal), brown-white (phase signal)
    • Battery: thick black (power negative), thick red (power positive)
    • Motor: thick yellow/green/blue (motor phases)
    • Motor hall sensor: 5-pin as specified above
    • Ignition (key) switch: thin red (VCC), thin blue
    • Indicator: thin red (indicator power output), thin black (indicator negative)
    • Brake: thin yellow (brake signal), thin black (negative power) or purple (high-level brake signal), black (GND)
    • Speed governor (throttle): thin blue (handlebar signal input), thin black (negative power), thin red (5 V positive power)
    • Charge port: thin red (charge input power positive), thin black (power negative)
    • Brake light: thin red (power positive), thin black (power negative)
    • Lighting note: for 12 V vehicle lights, use a DC converter from battery voltage (e.g. 24–84 V to 12 V) as illustrated in the included instructions

    Shipping & Delivery

    How long will my item take to arrive?

    Orders are typically dispatched within 1 working day and are shipped on a 24hour (non-guaranteed) service.

    Where do you ship to?

    We currently only ship orders within the UK.

    How can I track my order?

    Once your order has been dispatched, you will receive a tracking code. Tracking information is emailed to the email address that was provided when placing the order.

    Can I collect my order?

    Unfortunately we do not offer order collections from our fulfilment centre.

    WHY NOT CHECK OUT

    Recently viewed products

      Sign up for our newsletter

      Subscribe to our Mailing List

      Never miss any news and be the first to know about sale and offers

      © 2026 Radhouse, Powered by Shopify

        • American Express
        • Apple Pay
        • Diners Club
        • Discover
        • Google Pay
        • Maestro
        • Mastercard
        • PayPal
        • Shop Pay
        • Union Pay
        • Visa