Bearing & Seal Tools

20mm Bearing Remover Bush. Part No. 00-998_20 (radhouse.co.uk)

Read more less

17mm Bearing Remover Bush. Part No. 00-998_17 (radhouse.co.uk)

Read more less

15mm Bearing Remover Bush. Part No. 00-998_15 (radhouse.co.uk)

Read more less

AT2142

Read more less

12mm Bearing Remover Bush. Part No. 00-998_12 (radhouse.co.uk)

Read more less

10mm Bearing Remover Bush. Part No. 00-998_10 (radhouse.co.uk)

Read more less

The 8mm bearing remover bush is a replacement inner bearing puller accessory for slide hammer and blind hole removal applications, supplied as a single piece and suitable for removing bearings with an internal diameter of 8mm or 9mm. It is manufactured as a direct OEM replacement and intended to provide reliable removal performance. Please see the image before ordering to avoid mistakes. Easy to install, though professional installation is recommended if you are unsure. Features Replacement inner bearing puller remover accessory Suitable for slide hammer and blind hole removal applications Direct OEM replacement Meets or exceeds OEM quality Reliable removal performance Easy to install Professional installation recommended if unsure Image should be checked before ordering to avoid mistakes Specifications 8mm bearing remover bush Suitable for 8-9mm applications Fits bearing inner diameters of 8mm or 9mm 1 piece Cross-Reference OEM Part Numbers AT2140

Read more less

8mm Bearing Remover Bush. Part No. 00-998_08 (radhouse.co.uk)

Read more less

This bearing puller extractor tool is designed for removing internal bearings evenly from a range of applications, using expanding clamps tightened via the handle to grip the bearing securely for controlled extraction. Features Expanding clamp design grips the bearing for even removal Handle-tightening mechanism to snug the clamps for controlled pulling Helps remove bearings without damaging surrounding components Suitable for automotive flywheels, motorcycle wheels, bicycle wheels, pumps, generators, and general machine bearings Easy to install Specifications Material: High chrome vanadium steel Heat treatment: Heat treated steel Diameter range: Inner 9 mm to 23 mm Connection: 1/2" to 3/4" male thread water faucet Vehicle Fitments Automotive flywheel bearings Motorcycle wheel bearings Bicycle wheel bearings Pump bearings Generator bearings Machine bearings

Read more less

This 13-piece master combination bearing puller set is designed for removing blind-hole bearings from hubs and clutches. It combines a blind hole puller and a bridge type puller in one kit, supplied with the key pulling and striking components required for extraction. Features Suitable for bearing, hub and clutch blind-hole removal Includes both blind hole puller and bridge type puller Five bearing pullers to cover common internal bearing sizes Sliding hammer for controlled extraction Bridge frame for bridge type pulling applications Supplied with two adaptor bolts Entry-level kit intended as a cost-effective solution Supplied with a satisfaction guarantee Check the product image before ordering to ensure correct selection Specifications Set contents: 13 pieces Bearing puller sizes: 10, 11, 14, 20, 22

Read more less

Bearing Puller Set 13pcs. Master Combination Pro Set. PROFESSIONAL BEARING / HUB / CLUTCH PULLER REMOVING KIT The Blind Hole Puller & Bridge Type Puller Set. The kit contains 10 different sized bearing pullers: 8,10,12,15,17,19,20,25,30 and 35mm. Also includes a Sliding hammer, Bridge Frame and 2 adaptor bolts. Part No. 00-997 (radhouse.co.uk)

Read more less

Gear & Bearing Puller. Fast Fit Micro Gear & Bearing Puller Tool. For rapid removal of small bearings, Gears and a wide range of automotive/engineering applications including alternators and Generators, domestic appliances, power tools and pumps. Force applied via T-bar handle or 13mm (1/2) hexangonal drive. Part No. 00-996 (radhouse.co.uk)

Read more less

Part No. 00-940 (radhouse.co.uk)

Read more less

Part No. 00-8096

Read more less

The Motion Pro Wheel Bearing Remover Set (Part No. 08-0410) is designed for the removal of radial ball bearings on Harley-Davidson and American V-Twin motorcycles. The set utilizes a split collet design to ensure efficient and precise bearing extraction. Features: Split collet design for effective removal of radial ball bearings Includes a large driver and collets in sizes 3/4", 1", and 25 mm Heat-treated for durability and long service life Specifications: Compatible with Harley-Davidson and American V-Twin motorcycles Specifically designed for 3/4", 1", and 25 mm wheel bearings All 2007 Softail models, except Springer models, use a 25 mm radial ball bearing on the front wheel Cross Reference Numbers: 08-0410

Read more less

The Motion Pro Bearing Driver Set is designed for the efficient installation of bearings in motorcycles and other vehicles. Features: Fits bearings with 12–25 mm inner diameters and 32–47 mm outer diameters. Quickly interchangeable adaptors accommodate a wide range of bearing sizes. Durable steel handle paired with anodized aluminium drivers. Suitable for use with a hammer or shop press. Laser-etched adaptors for easy identification. Includes a protective blow-molded case for organized storage. Specifications: Handle Material: Steel. Driver Material: Anodized aluminium. Compatibility: Bearings with 12–25 mm I.D. and 32–47 mm O.D. This bearing driver set is an essential tool for mechanics and DIY enthusiasts, ensuring precise and damage-free bearing installation. Cross Reference Numbers: 08-0551

Read more less

The Factory Image Racing (FIR) 17-piece Bearing Master Tool Set is designed for the controlled installation of bearings and seals while helping to prevent damage to the bearing, seal or housing. Its interchangeable drivers cover bearing inner diameters from 10 mm to 38 mm and support accurate alignment during installation, making the set suitable for professional mechanics and DIY workshop use. Features Interchangeable adaptors for different bearing and seal sizes Suitable for use with a hammer or workshop press Laser-etched adaptors for quick identification Protective blow-moulded case for organised storage and transport Durable handle for controlled installation Specifications Set quantity: 17 pieces Adaptor material: Aluminium alloy Handle material: Steel Driver finish: Anodised Adaptor diameters: 10 mm, 12 mm, 14 mm, 15 mm, 16 mm, 18 mm, 20 mm, 22 mm, 25 mm, 28 mm, 30 mm, 32 mm, 35 mm and 38 mm

Read more less

Factory Image Racing This professional-quality bearing driver set is designed for the precise installation of bearings and seals without causing damage. Suitable for bearings with inner diameters ranging from 12mm to 25mm and outer diameters from 32mm to 47mm, it ensures accurate alignment during installation. Features: Accommodates bearings with 12-25mm inner diameters and 32-47mm outer diameters Interchangeable adaptors for versatility Durable steel handle with anodized aluminium drivers Laser-etched adaptors for easy identification Can be used with a hammer or shop press Includes a protective blow-molded case for organized storage Brand: FIR (Factory Image Racing) This set is ideal for mechanics and DIY enthusiasts seeking a reliable solution for bearing and seal installation. Its high-quality construction and comprehensive range of adaptors make it a valuable addition to any workshop.

Read more less

Bearing Driver Set Description: Professional quality workshop set Allows installation of straight races and seals without damage to bearings or axle housing Fits bearings with 12-25 mm I.D. and 32-47 mm O.D. Adapters can be changed quickly to accommodate a wide range of bearing combinations Durable steel handle and anodized aluminum drivers Can be used with a hammer or shop press Laser etched adapters for easy identification Comes with protective blow molded case Please see image before ordering to avoid mistakes Best value for money Additional Information: Cross reference numbers: UP-12597, MOTION PRO 08-0551

Read more less

The Motion Pro Steering Head Bearing Race Driver is designed for the safe and efficient installation of tapered bearing races into motorcycle frames. Crafted from durable 6061-T6 anodized aluminium, this tool ensures longevity and reliability. Features: Fits tapered steering bearings of sizes 41–42 mm, 47–48 mm, 51–52 mm, and 55–56 mm. Innovative double-sided drivers for versatility. Ergonomic handle for comfortable use. Laser-etched markings for easy identification. Specifications: Material: 6061-T6 anodized aluminium. Compatibility: Tapered steering bearings ranging from 41 mm to 56 mm. This tool is essential for motorcycle enthusiasts and professionals seeking precision in steering head bearing maintenance.

Read more less

The Motion Pro Mini Spring Pull Hook Tool is a compact and versatile tool designed for effortless handling of springs in tight spaces. Its ergonomic handle ensures a secure grip, offering control at any angle. Ideal for tasks involving exhaust pipe springs, seat or tank holding springs, cotter pins, and side stand springs, this tool is a practical addition to any workshop. Features: Compact size for improved access in confined areas. Ergonomic handle for secure and comfortable grip. Suitable for a variety of applications, including exhaust pipe springs, seat springs, and cotter pins. Durable construction for reliable performance. Cross Reference Numbers: 08-0549

Read more less

NEEDLE BEARING PRESS TOOL FOR A-ARMS KTM ATV. KTM 450/525 2008-2010 - Special KTM Bikes Bearing / Seal Press Drift A-Arms. - It is special working on the A-Arm Needle location. - Size overall length 85mm x both end face 10mm - Works on KTM ATV 525 & 450 series.- Carbon steel S45C hardened for long life.- Using the correct tool to fit your bearings and seal gives longer life to the bearings, fit them without damage. SPEC.: O.D.: 14.8MM/25MM/21.5MM/14.8MM.DRIFT OVERALL LENGTH 85MM X BOTH END LENGTH: 10MM. PSYCHIC MX-12197 Part No. 00-8064 (radhouse.co.uk) Cross Reference Numbers Only:83019020170

Read more less