Bearing & Seal Tools

Factory Image Racing (FIR) Steering Stem Bearing Removal Tool for Motorcycles:   Effortlessly pull and remove the steering stem bearing. Perfect for extracting the steering stem bearing race. Simply slide the tool under the bearing, wind to expand, and then tap the bearing race out using a drift bar. Compatible with a wide range of stems, accommodating a travel range between 30mm to 68mm. Avoid unnecessary struggles and potential damage to the steering stem. Crafted from durable hardened steel, the FIR Steering Stem Bearing Removal Tool comes with a black oxide coating for corrosion resistance. Ensure seamless installation and operation. Factory Image Racing Part Number 00-8046.FIR (radhouse.co.uk)

Read more less

Part No. 00-8030 (radhouse.co.uk)

Read more less

Part No. 00-8026 (radhouse.co.uk)

Read more less

Installs in 3 assembly ways: Long impact pipe for deep crank bearings. Punch for flat mechanism bearings. Turning screw set for rubber seals. Compatible with seal diameters (I.D. x O.D): 8x12, 10x15, 17x22, 20x25, and 30x35mm. Compatible with bearing diameters: 15, 17, 20, 22, 25, and 30mm. Comes complete in a handy plastic storage case.

Read more less

The Motion Pro Countershaft Seal Puller is a specialized tool designed for the safe and efficient removal of countershaft seals with an inner diameter ranging from 29 mm to 47 mm. It is suitable for use on off-road, street, and ATV engines. The tool features a unique expansion mechanism that ensures the seal is extracted straight, preventing damage to engine cases during the process. Constructed from durable steel, it is the only puller specifically designed for countershaft seals. Features: Safely removes countershaft seals with an ID of 29 mm to 47 mm Applicable to off-road, street, and ATV engines Unique expansion mechanism ensures straight extraction Prevents damage to engine cases during removal Durable steel construction Cross Reference Numbers: Manufacturer Part Number: 08-0636

Read more less

The Motion Pro Dowel Pin Puller Kit is a specialized toolset designed for the efficient removal of dowel pins ranging from 8mm to 14mm in diameter. This kit is essential for mechanics and technicians working on engines, transmissions, and other machinery where dowel pins are commonly used. Features: Includes collets for 8mm, 10mm, 12mm, and 14mm dowel pins Puller rod for removing slightly stuck pins Slide hammer attachment for extracting severely frozen pins Constructed from durable hardened steel Laser-etched markings for easy identification Comes with a storage tray for organized tool management Additional collet sizes available separately: 12.5mm 13.8mm 17mm 19mm 21mm Applications: Ideal for removing dowel pins in engine assemblies, transmission cases, and other mechanical components

Read more less

The Motion Pro 21mm Dowel Pin Puller is a specialized tool designed to assist in extracting stuck dowel pins from engine cases. It is intended for use in conjunction with the Motion Pro Dowel Pin Puller Set (Part No. 08-0604). Features: Designed to assist in pulling stuck dowel pins from engine cases To be used in conjunction with the 08-0604 Dowel Pin Puller Set Durable hardened steel construction Laser-etched for easy identification Cross Reference Numbers: 08-0707

Read more less

The Motion Pro 19mm Dowel Pin Puller is a specialized tool designed to assist in extracting stuck dowel pins from engine cases. It is intended for use in conjunction with the Motion Pro Dowel Pin Puller Set (Part No. 08-0604). Features: Designed to assist in pulling stuck dowel pins from engine cases To be used in conjunction with the 08-0604 Dowel Pin Puller Set Durable hardened steel construction Laser-etched for easy identification Cross Reference Numbers: 08-0708

Read more less

The Motion Pro 17mm Dowel Pin Puller is a specialized tool designed to assist in extracting stuck dowel pins from engine cases. It is intended for use in conjunction with the Motion Pro Dowel Pin Puller Set (Part No. 08-0604). Features: Designed to assist in pulling stuck dowel pins from engine cases To be used in conjunction with the 08-0604 Dowel Pin Puller Set Durable hardened steel construction Laser-etched for easy identification Cross Reference Numbers: 08-0709

Read more less

The Motion Pro 13.8mm Dowel Pin Puller is a specialized tool designed to assist in extracting stuck dowel pins from engine cases. It is intended for use in conjunction with the Motion Pro Dowel Pin Puller Set. Features: Designed to assist in pulling stuck dowel pins from engine cases To be used in conjunction with the 08-0604 Dowel Pin Puller Set Durable hardened steel construction Laser-etched for easy identification Cross Reference Numbers: 08-0710

Read more less

The Motion Pro 12.5mm Dowel Pin Puller is a specialized tool designed to assist in extracting stuck dowel pins from engine cases. It is intended for use in conjunction with the Motion Pro Dowel Pin Puller Set (Part No. 08-0604). Features: Designed to assist in pulling stuck dowel pins from engine cases To be used in conjunction with the 08-0604 Dowel Pin Puller Set Durable hardened steel construction Laser-etched for easy identification Cross Reference Numbers: 08-0711

Read more less

GEARBOX BEARING DRIFT TOOL, (This drift tool is used to install gearbox bearing on Triumph motorcycles) LENGTH: 12.6/ 126.8 MM I.D:19.3MM O.D:31.6/ 37.5/ 30MM APPLICATION: TRIUMPH Part No. 00-7878.DR (radhouse.co.uk)

Read more less

HEAD STOCK STEERING BEARING TOOL, SPEC: I.D 31.6mm, 38.35mm - O.D 44.3, 38mm, H: 80.5mm An ideal tool to undo and re-torque steering stem bearing preload to the correct setting without the use of a hammer and chisel Comes with a 1/2” Square drive, Zinc plated Size; I.D 31.6mm, 38.35mm - O.D 44.3, 38mm, H: 80.5mm Fits; Triumph Models Application: TRIUMPH Part No. 00-7873.DR (radhouse.co.uk)

Read more less

KTM ATV 450/525 SERIES, Steering bearing press tool AT-12668 Bolt M14x60 mm, pitch 2.0, head cap O.D. 72 mm, I.D. 14.2/ 61.4/ 66.4 mm, H 32 mm, body length 63.1 mm, O.D. 31.8- 27/54/38/31.8-27 mm Part No. 00-7866.DR (radhouse.co.uk) Cross reference numbers ONLY. 83019020000

Read more less

The Motion Pro 08-0544 Steering Stem Bearing Tool is designed to efficiently remove and install tapered roller bearings at the base of motorcycle steering stems. Features: Removes and installs tapered roller bearings at the base of the steering stem. Fits most motorcycles equipped with such bearings. Blue anodized bearing protectors made from 6061 billet aluminium, laser-etched for easy identification. Compact design fits within steering stops on the lower triple clamp. Protects the steering stem during both removal and installation processes. Includes race protectors in sizes: 26 mm 28 mm 30-31 mm 35-36 mm Specifications: Brand: Motion Pro Product Type: Steering Stem Bearing Tool Material: 6061 Billet Aluminium Anodized Finish: Blue

Read more less

SEAL AND BEARING INSTALL / POSITIONING KIT Seal & Bearing Installation Driver set. Insert bearing races quickly and straight on first time. Collets are constructed from a high impact moulded plastic, ideal for inserting your seal or bearing without damage to bearing races or bike. Seven piece kit includes driver handle and 6 collets for the following size bearings:39.5, 44.5, 50,59, 63, 65, 72, 76 & 81mm. Set contains nine sizes:1.555”(39.5mm) 1.752”(44.5mm) 1.968”(50.0mm) 2.322”(59.0mm) 2.48”(63.0mm) 2.559”(65.0mm) 2.834”(72.0mm) 2.992”(76.0mm) 3.189”(81.0mm) Set includes a handy plastic storage case. It includes a grip having an inner end fixed with a combining rod with a combining hole and 6 pieces heavy-duty positioning press blocks with different diameters in order to match different-sized bearings. There are 3 pieces positioning press blocks are formed with two different diameters. Part No. 00-7825 (radhouse.co.uk)

Read more less

This 4-piece oil seal remover pick and hook set is a hand tool set for precision workshop, electrical and general maintenance work. It is used for separating wires, removing small fuses and O-rings, and retrieving washers or other loose parts. The different pick and hook shapes allow access to confined spaces and awkward angles. Features Suitable for precision workshop and maintenance tasks Used for separating wires Used for removing small fuses Used for removing O-rings Used for retrieving washers and other loose parts Four tool profiles for access at different angles and in confined spaces Specifications Quantity: 4 pieces Hook profiles: 45°, 90°, 110° and straight Material: Hardened steel shafts with plastic handles Length: approximately 13.5 cm Colour: blue and silver Cross-Reference OEM Part Numbers 427723 00-758.N

Read more less

Part No. 00-568 (radhouse.co.uk)

Read more less

Part No. 00-565 (radhouse.co.uk) SUPER SEED FROM 00-057.KL TO 00-565

Read more less

Steering Race Removal Tool. Steering Race Remover makes head tube bearing race removal easy. Tool is designed to be pulled through the steering tube until the flared ends snap in behind the race. A blow on the tool head removes the bearing race. Fits most small steering stems with bearing race from 25-48mm inner diameter. Part No. 00-530.DR (radhouse.co.uk)

Read more less

Steering Race Removal Tool. Steering Race Remover makes head tube bearing race removal easy. Tool is designed to be pulled through the steering tube until the flared ends snap in behind the race. A blow on the tool head removes the bearing race. Fits most small steering stems with bearing race from 25-34mm inner diameter. Part No. 00-530 (radhouse.co.uk)

Read more less