Engine Tools

The Motion Pro Tappet Adjuster Tool is built for precise valve clearance adjustments on motorcycles and ATVs with screw-type tappet adjusters. Features: Heat-treated and chrome-plated for durability. 10mm socket wrench with a 4mm square-type adjuster for accurate control. Allows adjustment without disturbing the valve setting when fastening the lock nut. Knurled knob ensures a secure grip for ease of use. Specifications: Adjuster Size: 4mm square. Socket Wrench Size: 10mm. Material: Heat-treated, chrome-plated steel. Cross Reference Numbers: 08-0734

Read more less

The Motion Pro Tappet Adjuster Tool is designed to make accurate valve clearance adjustments on motorcycles and ATVs with screw-type tappet adjusters. Features: Durable heat-treated and chrome-plated construction for long-lasting use. 8mm socket wrench and 3mm square-type adjuster for precise adjustments. Allows valve lash adjustment without disturbing the setting during lock nut fastening. Knurled knob for enhanced grip during use. Specifications: Adjuster Size: 3mm square. Socket Wrench Size: 8mm. Material: Heat-treated, chrome-plated steel.

Read more less

The Motion Pro Tappet Adjuster Tool is designed for precise valve clearance adjustments on motorcycles and ATVs with screw-type tappet adjusters. Features: Heat-treated and chrome-plated for durability. 9mm socket wrench with a 3mm square-type adjuster for precise control. Repositionable handle to hold the lock nut while adjusting the tappet screw. Knurled knob for a secure grip. Specifications: Adjuster Size: 3mm square. Socket Wrench Size: 9mm. Material: Heat-treated, chrome-plated steel.

Read more less

The Motion Pro Tappet Adjuster Tool facilitates precise valve lash adjustments on motorcycles and ATVs equipped with screw-type tappet adjusters. Features: Allows accurate valve lash adjustment without altering the setting during lock nut fastening. Knurled knob on the adjuster driver ensures a secure grip. Integrated repositionable wrench handle holds the lock nut while the driver loosens or tightens the valve adjustment screw. Specifications: Adjuster Size: 3mm square. Socket Wrench Size: 10mm. Material: Heat-treated and chrome-plated for durability. Cross Reference Numbers: 08-0731

Read more less

The Motion Pro Tappet Adjuster Tool is designed for precise valve clearance adjustments on motorcycles and ATVs equipped with screw-type tappet adjusters. Features: Heat-treated and chrome-plated for enhanced durability. Includes an 8mm socket wrench and a 3mm square-type adjuster. Facilitates accurate valve lash adjustments without disturbing the setting during lock nut fastening. Knurled knob on adjuster driver ensures a secure grip. Integrated repositionable wrench handle holds the lock nut while the driver loosens or tightens the valve adjustment screw. Specifications: Adjuster Size: 3mm square. Socket Wrench Size: 8mm. Material: Heat-treated, chrome-plated steel.

Read more less

Tappet Tool Set. (Dirt Racing) Heat treated and chrome plated for durability. Set incudes three wrenches, 8, 9 & 10mm and three adjusters: screw type and 3 & 4mm square type. Interchange adjusters and wrenches for nine different combinations. Fits most motorcycles and ATVs with screw type tappet adjusters. TAPPET ADJUSTING TOOLS SPEC: SET INCLUDES THREE WRENCHES, 8, 9 & 10MM ADJUSTERS: SCREW TYPE ADJUSTERS: SQUARE TYPE 3MM ADJUSTERS: SQUARE TYPE 4MM MATERIAL: SCM440 FINISH: CHROME - SCM440 HIGH STANDARD MATERIAL AND CHROME PLATED FOR DURABILITY - INTERCHANGE ADJUSTERS AND WRENCHES FOR NINE DIFFERENT COMBINATIONS - FITS MOST MOTORCYCLES AND ATVS WITH SCREW-TYPE TAPPET ADJUSTERS - Best value for money- All are made to OEM specifications and match the original equipment in appearance.- PSYCHIC products are a high quality replacement part and - Please check the image before ordering to avoid mistakes.Part No. 00-162.DR (radhouse.co.uk) Cross reference numbers ONLY. UP-12050, MOTION PRO# 08-0073,

Read more less

This flywheel puller is designed for the removal of motorcycle and ATV flywheels with M40 x 1.5 right-hand internal threads. Manufactured from high-carbon steel and heat-treated for durability, it ensures reliable performance during maintenance tasks. Features: Constructed from premium high-carbon steel for enhanced strength. Heat-treated to withstand rigorous use. Durable hot black oxide finish resists corrosion. Laser-etched with the Motion Pro logo and part number for easy identification. Compatibility: This tool is compatible with various Suzuki models, including: Suzuki GSF1250 Bandit (2007–2009, 2016) Suzuki GSX-R1000 (2009, 2011–2016) Suzuki GSX1250F (2011) Suzuki VZ800 Marauder (1997–2004) Cross Reference Numbers: Equivalent to Suzuki OEM tools 09930-34970 rotor remover and 09930-30460 rotor remover bolt

Read more less

4-Stroke Spark Plug tool. - Specially designed for water cooled 4-strokes with 16mm plugs. - 2-step extension . Swivel or Fixed. - Manufactured with Chrome Alloy steel that is through hardened.- Chrome plated finish for years of service.- Small and neat very compact for bumbag.- Socket can be used with a screwdriver to hold the front 19mm hex axles of late model 4-strokes. - For use on models like KTM 4-strokes, DRZ400, CRF450R, YZF/WRF400/426, YZF250, KLX300, DVX400 and more. - Can also use socket to remove 19mm hex axles on late-model four-strokes.- FIR products are a high quality replacement part and - Best value for money- Please check the image before ordering to avoid mistakes. Cross reference numbers ONLY. 08-0239, 00-144.DR, 00-144.MP

Read more less

The Flywheel Puller M50 x 1.5 R.H. Internal Thread is a specialized tool designed for the removal of flywheels or rotors on specific motorcycle and ATV models. Manufactured from premium high-carbon steel, it is heat-treated for enhanced strength and durability, ensuring reliable performance during maintenance tasks. The tool features a durable hot black oxide finish and is laser-etched with the Motion Pro logo and part number for easy identification. It is equivalent to OEM tools such as Arctic Cat 0444-075 and Suzuki 09930-30721-LPT, making it a versatile addition to any mechanic's toolkit. Features: Designed for the removal of flywheels or rotors Premium high-carbon steel construction Heat-treated for enhanced strength and durability Durable hot black oxide finish Laser-etched with Motion Pro logo and part number Equivalent to OEM tools: Arctic Cat 0444-075, Suzuki 09930-30721-LPT Specifications: Thread Size: M50 x 1.5 R.H. internal thread Material: High-carbon steel Finish: Hot black oxide Cross Reference Numbers: 08-0417

Read more less

Flywheel Puller 50mm X 1.50 RH. THREAD INTERNAL ON PULLER SUZUKI LTA400 02-04 & 06-08. SUZUKI LTA400F 02-08. SUZUKI LTF400 02-04. SUZUKI LTF400F 02-08. SUZUKI LTA450X 07-09.SUZUKI LTA700X 05-09. Suzuki LS650 87-07, VS1400 87-07, GV1400 86-87, VX800 90-93 VS700 86, VS750 88-91, VZR1800 06-07, VL1500 98-07, VS800 92-95, LTA500F 00-07, LTF500F 98-07, LTA700X 05-07, LTA450X 07, LTF400F 02-07, LTA400F 02-07, LTF400 02-04, Used for removal of the flywheel or rotor if applicable. Premium quality high carbon steel. Heat treated for strength and durability. Durable hot black oxide finish. Tips on use. - Make sure the flywheel thread is clean of dirt and not damaged before screwing the puller in. - Use copper grease on the puller threads, for long life. - Make sure the puller is fully screwed into the flywheel. - After tightening use a hammer on the centre and tap to jolt free [not always need]. - If using old flywheel pullers make sure the threads are in good condition before use to avoid damage to flywheel. Part No. 00-133.DR (radhouse.co.uk)

Read more less

Part No. 00-132 (radhouse.co.uk)

Read more less

M22 / 22mm x 1.50mm Right Hand fly wheel puller Extractor. BUZZETTI 5219 Made in Italy. BOSCH, DUCATI, MOTOPLATT, Beta Rev80 and Evo 80cc trials bikes PIAGGIO NGR MC2 50 2T LC fino a 1997, PIAGGIO NRG 50 2T LC, PIAGGIO NRG EXTREME 50 2T, PIAGGIO NRG EXTREME 50 2T LC, PIAGGIO NRG MC2 50 2T LC dal 1998 in poi, Part No. 00-131_B (radhouse.co.uk).

Read more less

FLY WHEEL EXTRACTOR M28 x 1.25mm Right Hand Thread. ATK rotax with motoplat. A flywheel puller with a thread diameter of 28mm and a thread pitch of 1.25mm. Used for removal of the flywheel or rotor. Premium quality high carbon steel S45C. Heat treated for strength and durability. Durable hot black oxide finish. 28mm x 1.25P RH External Thread. Tips on use. - Make sure the flywheel thread is clean of dirt and not damaged before screwing the puller in. - Use copper grease on the puller threads, for long life. - Make sure the puller is fully screwed into the flywheel. - After tightening use a hammer on the centre and tap to jolt free [not always need]. - If using old flywheel pullers make sure the threads are in good condition before use to avoid damage to flywheel. Part No. 00-129.DR (radhouse.co.uk) Cross reference numbers ONLY. BZ5243, GS9518312,

Read more less

Part No. 00-129_B (radhouse.co.uk) FLY WHEEL EXTRACTOR M28 x 1.25mm Right Hand Thread. A flywheel puller with a thread diameter of 28mm and a thread pitch of 1.25mm. ATK rotax with motoplat.

Read more less

Flywheel Extractor M24 x 1.00 RH Factory Image Racing High Carbon Steel Quality tool. Consult the descriptions; measurements are from male threads (outside edge) NOTE: Internal threads in the engine part take a male-threaded tool or puller; external threads on the engine part take a female-threaded tool or puller. NOTE: Lubricate heavily before use. Fits most Honda's 50cc - 80cc Mini Bike QA, MR, CH, CR Series and 1995-07 RS 125 Road Racing Models Fits most Kawasaki and Suzuki 50cc Mini LT50 - YAMAHA - MBK - PEUGEOT - HONDA - KYMCO 50cc Models Part No. 00-128.DR (radhouse.co.uk) Cross Reference Numbers Only: BUZZETTI 5224, MP43, 00-128.MP,   00-128.BUZ   Brand: FIR (Factory Image Racing) Honda 2007 Honda CH80 Elite 2006 Honda CH80 Elite 2005 Honda CH80 Elite 2004 Honda CH80 Elite 2003 Honda CH80 Elite 2002 Honda CH80 Elite 2001 Honda CH80 Elite 2000 Honda CH80 Elite 1999 Honda CH80 Elite 1998 Honda CH80 Elite 1997 Honda CH80 Elite 1996 Honda CH80 Elite 1995 Honda CH80 Elite 1994 Honda CH80 Elite 1993 Honda CH80 Elite 1992 Honda CH80 Elite 1991 Honda CH80 Elite 1990 Honda CH80 Elite 1989 Honda CH80 Elite 1988 Honda CH80 Elite 1987 Honda CH80 Elite 1986 Honda CH80 Elite 1985 Honda CH80 Elite 1975 Honda MR50K Elsinore 1974 Honda MR50K Elsinore 1975 Honda QA50K 1974 Honda QA50K 1973 Honda QA50K 1972 Honda QA50K 1971 Honda QA50K 1970 Honda QA50K 2003 Honda XR50R 2002 Honda XR50R 2001 Honda XR50R 2000 Honda XR50R 1978 Honda Z50 1977 Honda Z50 1976 Honda Z50 1975 Honda Z50AK Mini Trail 1974 Honda Z50AK Mini Trail 1973 Honda Z50AK Mini Trail 1972 Honda Z50AK Mini Trail 1971 Honda Z50AK Mini Trail 1970 Honda Z50AK Mini Trail 1969 Honda Z50AK Mini Trail 1968 Honda Z50AK Mini Trail 1999 Honda Z50R 1998 Honda Z50R 1997 Honda Z50R 1996 Honda Z50R 1995 Honda Z50R 1994 Honda Z50R 1993 Honda Z50R 1992 Honda Z50R 1991 Honda Z50R 1989 Honda Z50R 1988 Honda Z50R 1987 Honda Z50R 1986 Honda Z50R 1985 Honda Z50R 1984 Honda Z50R 1983 Honda Z50R 1982 Honda Z50R 1981 Honda Z50R 1980 Honda Z50R 1979 Honda Z50R 1986 Honda Z50RD

Read more less

Flywheel Extractor M24 x 1.00 RH Part No. 00-128.BUZ [Old No. 00-128.MP] (radhouse.co.uk)

Read more less

Flywheel Puller 28mm x 1.5-RH-Internal Male RepairManual.com is proud to offer this Husqvarna Flywheel Puller 28mm x 1.5-RH-Internal Male for sale. Flywheel Puller for Husqvarna 'E' Series Models, 350cc and 610cc. [MP45] Used for removal of the flywheel or rotor if applicable. Premium quality high carbon steel. Heat treated for strength and durability. Durable hot black oxide finish. Tips on use. - Make sure the flywheel thread is clean of dirt and not damaged before screwing the puller in. - Use copper grease on the puller threads, for long life. - Make sure the puller is fully screwed into the flywheel. - After tightening use a hammer on the centre and tap to jolt free [not always need]. - If using old flywheel pullers make sure the threads are in good condition before use to avoid damage to flywheel. Part No. 00-127.DR (radhouse.co.uk)

Read more less

Part No. 00-127_B (radhouse.co.uk) MP45 Husqvarna Flywheel Puller 28mm x 1.5-RH-Internal Male RepairManual.com is proud to offer this Husqvarna Flywheel Puller 28mm x 1.5-RH-Internal Male for sale. Flywheel Puller for Husqvarna 'E' Series Models, 350cc and 610cc.

Read more less

Flywheel Puller 30mm x 1.50mm Right Hand Internal Male High-quality Universal flywheel puller for most ATK (ROTAX) models using 30mm x 1.5 Right Hand Internal male threads. Compare to OEM PA-46075. Fits: Polaris Outlaw 500 03-07, Polaris Predator 500, Adly 500/500s, Suzuki LT250 Ozark, Yamaha YZF450 04-07, and WR450F 04-06. Used for removal of the flywheel or rotor if applicable. Premium quality high carbon steel. Heat treated for strength and durability. Durable hot black oxide finish. Tips on use: Make sure the flywheel thread is clean of dirt and not damaged before screwing the puller in. Use copper grease on the puller threads, for long life. Make sure the puller is fully screwed into the flywheel. After tightening use a hammer on the center and tap to jolt free [not always needed]. If using old flywheel pullers make sure the threads are in good condition before use to avoid damage to the flywheel. Cross-reference numbers ONLY: Buzzetti 5247 Compatible with: 1999 ATK 250LQ 2000 ATK 260 2000 ATK 500 DT Dirtrackers 2000 ATK 600 DT Dirtrackers 2001 ATK 500 DT Dirtrackers 2001 ATK 600 DT Dirtrackers 2002 ATK 500 DT Dirtrackers 2002 ATK 500 Super Motard 2002 ATK 600 DT Dirtrackers 2002 ATK 600 Super Motard

Read more less

Flywheel Puller 30mm x 1.5-Right Hand Internal Male. High quality Stubblefield flywheel puller for most ATK ROTAX models using 30mm x 1.5 Right Hand Internal male threads. 1999 ATK 250LQ 2000 ATK 260 2000 ATK 500 DT Dirtrackers 2000 ATK 600 DT Dirtrackers 2001 ATK 500 DT Dirtrackers2001 ATK 600 DT Dirtrackers 2002 ATK 500 DT Dirtrackers 2002 ATK 500 Super Motard 2002 ATK 600 DT Dirtrackers 2002 ATK 600 Super Motard Part No. 00-126_B (radhouse.co.uk) Buzzetti 5247 Made in Italy

Read more less

Rotor Magneto Flywheel Extractor Puller 22mm x 1.00 Right Hand. BUZZETTI 5218 KTM SX65 / SX85 all, KTM TC65 / TC85 all, Lambretta 125 E/F SCOOTER, - Professional quality workshop tools. - Carbon steel, Black Oxide finish. - BUZZETTI products are a high quality. Tools, Accessories and Part all - Made in Italy. Tips on use. - Make sure the flywheel thread is clean of dirt and not damaged before screwing the puller in. - Use copper grease on the puller threads, for long life. - Make sure the puller is fully screwed into the flywheel. - After tightening use a hammer on the centre and tap to jolt free [not always need]. - If using old flywheel pullers make sure the threads are in good condition before use to avoid damage to flywheel. Part No. 00-125 (radhouse.co.uk)

Read more less

Part No. 00-124 (radhouse.co.uk) 26mm x 1.00 RIGHT HAND FLYWHEEL EXTRACTOR.

Read more less