Engine Tools

Part No. 00-120.Z (radhouse.co.uk) Cross Reference Numbers Only: 33-534.TLZ

Read more less

FLYWHEEL PULLER M33 - 33mm x 1.50mm Right hand tread. Applications:Husqvarna/Cagiva: All models with ignition point systems, 1978 and later, large flywheel motoplat ignitions C.D.I.Bultaco: Femsa magneto, most late 1960’s ”“ 1970’s, Pursang Mx, El Tigre, Frontera, Bandito, Matador, Metrella, Sherpa series S125 and 200Mx, Sherpa “T”Others: Ossa Mx, Montesa Mx, Zundap, Sachs, Pento and Puch, Many European Mo-Peds and Scooters. Used for removal of the flywheel or rotor if applicable. Premium quality high carbon steel. Heat treated for strength and durability. Durable hot black oxide finish. BUZZETTI products are a high quality. Tools, Accessories and Part all Tips on use. - Make sure the flywheel thread is clean of dirt and not damaged before screwing the puller in. - Use copper grease on the puller threads, for long life. - Make sure the puller is fully screwed into the flywheel. - After tightening use a hammer on the centre and tap to jolt free [not always need]. - If using old flywheel pullers make sure the threads are in good condition before use to avoid damage to flywheel. Part No. 00-106_B (radhouse.co.uk)

Read more less

FLYWHEEL PULLER 28mm X 1.00 RIGHT HAND BUZZETTI 2022 Used for removal of the flywheel or rotor. Premium quality high carbon steel S45C. Heat treated for strength and durability. Durable hot black oxide finish. 28mm x 1.0P RH External Thread. Tips on use. - Make sure the flywheel thread is clean of dirt and not damaged before screwing the puller in. - Use copper grease on the puller threads, for long life. - Make sure the puller is fully screwed into the flywheel. - After tightening use a hammer on the centre and tap to jolt free [not always need]. - If using old flywheel pullers make sure the threads are in good condition before use to avoid damage to flywheel. Part No. 00-105.B (radhouse.co.uk)

Read more less

FLYWHEEL PULLER 26mm x 1.25 /27mm x 1.50. Right Hand Cross reference numbers. Buzzetti 5288 Tips on use. - Make sure the flywheel thread is clean of dirt and not damaged before screwing the puller in. - Use copper grease on the puller threads, for long life. - Make sure the puller is fully screwed into the flywheel. - After tightening use a hammer on the centre and tap to jolt free [not always need]. - If using old flywheel pullers make sure the threads are in good condition before use to avoid damage to flywheel.

Read more less

FLYWHEEL PULLER DOUBLE ENDED. BUZZETTI 5288 Description: M26x1.5mm / M27x1.25mm Both RH Compatible with Bosch / Motoplat / Ducati / MOTOPLAT / HUSQVARNA / MONTESA Features: BUZZETTI products are high-quality replacement parts and Made in Italy. Please see image before ordering to avoid mistakes. Tips on use: Ensure the flywheel thread is clean of dirt and not damaged before screwing the puller in. Use copper grease on the puller threads for long life. Make sure the puller is fully screwed into the flywheel. After tightening, use a hammer on the center and tap to jolt free (not always needed). If using old flywheel pullers, make sure the threads are in good condition before use to avoid damage to the flywheel.

Read more less

Flywheel Puller M26 x 1.50mm RH Thread External Description: Compatible with KTM ENDURO / OFFROAD / MX TWO-STROKE 125/250/300/360CC KTM MOTOPLAT. Cross reference numbers: MP12 WPS 62-2002 MX-12928 Fits most: Husaberg: 4 stroke 400cc, 501cc, and 600cc off-road models. Husqvarna: Late 2 stroke models with CDI ignitions. KTM: 125cc, 250cc, 300cc, 360cc, 495cc XC and MX 2 stroke. ATK Rotax models. Classic: Bultaco, Ossa, Montesa, KTM, Husqvarna, Sachs, Puch, Zundap, Cannondale 440 speed models. Compatible models: 1996-1999 Husaberg FC400 1994-2000 Husaberg FC501 1993-1996 Husaberg FC600 1998-2000 Husaberg FC600 1996-2000 Husaberg FE400 1996-2003 Husaberg FE400E 1989-2000 Husaberg FE501 1996-2003 Husaberg FE501E 1993-1996 Husaberg FE600 2000 Husaberg FE600 1996-2000 Husaberg FE600E 2003 Husaberg FS400E 1998-1999 Husaberg FS600E Tips on use: Ensure the flywheel thread is clean of dirt and not damaged before screwing the puller in. Use copper grease on the puller threads for long life. Make sure the puller is fully screwed into the flywheel. After tightening, use a hammer on the center and tap to jolt free (not always needed). If using old flywheel pullers, make sure the threads are in good condition before use to avoid damage to the flywheel.

Read more less

FLYWHEEL PULLER M26 RH BUZZETTI 5234 Description: 26mm x 1.50 RIGHT HAND External flywheel enduro. Compatible with Bosch / Motoplat / Ducati / SEP. Tips on use: Ensure the flywheel thread is clean of dirt and not damaged before screwing the puller in. Use copper grease on the puller threads for long life. Make sure the puller is fully screwed into the flywheel. After tightening, use a hammer on the center and tap to jolt free (not always needed). If using old flywheel pullers, make sure the threads are in good condition before use to avoid damage to the flywheel.

Read more less

M27x1.25 R/H FLYWHEEL PULLER 27mm Description: Fits Motoplat small internal rotor MX & ENDURO. Suitable for HUSQVARNA (FEMSA - BOSCH - MOTOPLAT) Most 1960-1970 2 Stroke Models w/C.D.I. Ignition. Compatible with KTM (FEMSA / BOSCH / MOTOPLAT) Most 125cc, 250cc 300cc, 360cc, 495cc XC & MX 2 Stroke Models, and most BULTACO, OSSA, MONTESA, PENTON, SACHS & MAICO [MP3]. Fits most: Husqvarna: 1970-80 2 stroke models with CDI ignitions. KTM: Current 2 stroke liquid cooled models. Classic: Ignition points with condensers or CDI Ignition Systems - Bultaco, Ossa, Montesa, Husqvarna, Penton, Sachs, and Maico. Tips on use: Make sure the flywheel thread is clean of dirt and not damaged before screwing the puller in. Use copper grease on the puller threads for long life. Ensure the puller is fully screwed into the flywheel. After tightening, use a hammer on the center and tap to jolt free (not always needed). If using old flywheel pullers, make sure the threads are in good condition before use to avoid damage to the flywheel.

Read more less

27mm x 1.25 Right Hand, Flywheel extractor magneto Puller. BUZZETTI 5239 Motoplat small internal rota MX. Ducati STEERING ROPE FOR DERBI 50 GPR / MVT Tips on use. - Make sure the flywheel thread is clean of dirt and not damaged before screwing the puller in. - Use copper grease on the puller threads, for long life. - Make sure the puller is fully screwed into the flywheel. - After tightening use a hammer on the centre and tap to jolt free [not always need]. - If using old flywheel pullers make sure the threads are in good condition before use to avoid damage to flywheel. Part No. 00-102 (radhouse.co.uk)

Read more less

Left-hand M27 × 1.00 thread flywheel/rotor puller designed for precise removal of magneto flywheels and rotors on a wide range of motorcycles. Manufactured from high-carbon steel with heat treatment and a corrosion-resistant black oxide finish, the tool uses a 17 mm drive and compact body for controlled application in confined spaces. Features Purpose-built for removing flywheels or rotors on compatible motorcycles Left-hand external thread configuration for correct engagement with applicable flywheels 17 mm drive head for positive engagement with standard tools Use guidance: ensure flywheel threads are clean, apply copper grease to the puller threads, and screw the puller fully home before applying pressure Specifications Material: High-carbon steel (S45C) Heat treatment: Yes Finish: Black oxide Thread: M27 × 1.00 LH (left-hand) Bolt head size: 17 mm Overall puller length: 67 mm Body length: 42 mm Cross-Reference OEM Part Numbers BUZZETTI 5250 MOTION PRO 08-0026 MOTION PRO 35-5931 MOTION PRO MP1 YM-01189 07933-0010000 57001-252 54629009044 09930-30113 Vehicle Fitments Honda CRF50F (2004–2011) Honda XR50R (2000–2003) Honda CRF70F (2004–2011) Honda CR80/CR85 (1983–2008) Honda CRF80F (2004–2011) Honda XR80 (1979–2003) Honda CRF100F (2004–2012) Honda XR100/R (1981–2003) Honda CR250R (1984–2007) Honda CR450R (1981) Honda CR500 (1984–2001) Kawasaki KDX50 (2003–2006) Kawasaki KX60 (1983–2003) Kawasaki KX65 (2000–2012) Kawasaki KDX80 (1980–1988) Kawasaki KX80/85/100 (1998–2012) Kawasaki KX125 (1993–2005) Kawasaki KDX200 (1997–2006) Kawasaki KDX220 (1997–2005) Kawasaki KDX250 (1991–1994) Kawasaki KX250 (1992–2007) Kawasaki KX500 (1984–2004) KTM 65 SX (1999–2012) KTM 65 XC (2008) KTM 85 SX (2004–2010) KTM 85 XC (2008) KTM 105 XC (2008–2012) KTM 125 EXC (1998–2002) KTM 125 SX (1998–2011) KTM 144 SX (2008) KTM 150 SX (2009–2010) KTM 150 XC (2010–2011) KTM 200 EXC (1998–2005) KTM 200 MXC (1998–2002) KTM 200 XC (2006–2009) KTM 200 XC-W (2006–2012) KTM 250 EXC (2000–2005) KTM 250 MXC (2000–2002) KTM 250 SX (2000–2012) KTM 250 XC (2006–2007) KTM 300 EXC/MXC (1998–2005) KTM 300 XC/XC-W (2006–2007) KTM 380 EXC/MXC/SX (1998–2001) Suzuki RM60 (2003) Suzuki RM65 (2003–2005) Suzuki DR100 (1983–1990) Suzuki RM100 (2003) Suzuki DR125 (1982–1988) Suzuki DR-Z125/L (2003–2009) Suzuki RM125 (1996–2008) Suzuki DR200 (1986–1988) Suzuki RM250 (1989–2008) Suzuki RMX250 (1989–1998) Yamaha DT50 (1976–1988) Yamaha IT125 (1980–1982) Yamaha IT200 (1984–1985) Yamaha TT250 (1980–1982) Yamaha TT500 (1976–1981) Yamaha TT-R125 (2000–2012) Yamaha TT-R250 (2000–2001) Yamaha PW50 (1981–2003) Yamaha PW80 (1983–2003) Yamaha RT100 (1990–1999) Yamaha RT180 (1990–1995) Yamaha WR250Z (1992–2003) Yamaha WR500Z (1992–1993) Yamaha YZ125 (1976–2008) Yamaha YZ250 (1976–2008) Yamaha YZ400F (1998–1999) Yamaha YZ426F (2000–2001) Yamaha YZ465 (1980–1981) Yamaha YZ490 (1983–1990)

Read more less

FLYWHEEL PULLER / EXTRACTOR 27mm x 1.00 LEFT HAND. BUZZETTI 5250 Honda CRF50F 04-11, XR50R 00-03, CRF70F 04-11, CR80 83-02, CRF80F 04-11, XR80 79-03, CR85 03-08, CRF100F 04-12, XR100/R 81-03, CR250R 1981, CR500 84-01. Kawasaki KDX 03-06, KX60 83-03, KX65 00-12, KDX80 80-88, KX80 83-85, KX80/85/100 98-12, KX125 93-05, KDX200 97-06, KDX220 97-05, KDX 91-94, KX250 92-07, KX500 84-85, KX500 92-04. KTM 65SX 99-12, 85SX 04-10, 85XC 2008, 105SX 06-11, 105XC 08-12, 125EXC 98-02, 125SX 98-11, 144SX 2008, 150SX 09-10, 150XC 10-11, 200EXC 98-05, 200MXC 98-02, 200XC 06-09, 200XCW 06- 12, 250EXC 00-05, 250MXC 00-02, 250SX 00-12, 250XC 06-07, XC250 06-07, 300EXC/MXC 98-05, 300XC/XCW 06-07. Suzuki RM60 2003, RM65 03-05, DR100 83-90, RM100 2003, DR125 82-88, DRZ125/L 03-09, RM125 96-08, DR200 86-88, RM250 89-08, RMX250 89-98. Yamaha To many to list. Tips on use. - Make sure the flywheel thread is clean of dirt and not damaged before screwing the puller in. - Use copper grease on the puller threads, for long life. - Make sure the puller is fully screwed into the flywheel. - After tightening use a hammer on the centre and tap to jolt free [not always need]. - If using old flywheel pullers make sure the threads are in good condition before use to avoid damage to flywheel. Part No. 00-101_B (radhouse.co.uk) 00-101_B

Read more less

The Flywheel Puller M27 x 1.0 L.H. External Thread is a specialized tool designed for the removal of flywheels or rotors on various motorcycle models. Manufactured from premium high-carbon steel, it is heat-treated for enhanced strength and durability, ensuring reliable performance during maintenance tasks. The tool features a durable hot black oxide finish and is laser-etched with the Motion Pro logo and part number for easy identification. Features: Designed for the removal of flywheels or rotors Premium high-carbon steel construction Heat-treated for enhanced strength and durability Durable hot black oxide finish Laser-etched with Motion Pro logo and part number Specifications: Thread Size: M27 x 1.0 L.H. external thread Material: High-carbon steel Finish: Hot black oxide Cross Reference Numbers: 08-0026 Equivalent to OEM tools: Honda 07933-0010000 Kawasaki 57001-252 KTM 54629009044 Suzuki 09930-30113 Yamaha YM-01189

Read more less

FLYWHEEL PULLER M19x1.00 R/H Right Hand. LEM, KTM, Italjet and PW50. Minarelli AM6 for Aprilia RS50, Used for removal of the flywheel or rotor. Premium quality high carbon steel S45C. Heat treated for strength and durability. Durable hot black oxide finish. 19mm x 1.0P RH External Thread. Bolt Head AF 18mm Lenght 58mm Body size 40mm long, Hole Dia. 13.5mm x 25mm deep. Tips on use. - Make sure the flywheel thread is clean of dirt and not damaged before screwing the puller in. - Use copper grease on the puller threads, for long life. - Make sure the puller is fully screwed into the flywheel. - After tightening use a hammer on the centre and tap to jolt free [not always need]. - If using old flywheel pullers make sure the threads are in good condition before use to avoid damage to flywheel. Part No.00-099 (radhouse.co.uk)

Read more less

FLYWHEEL PULLER M19 BUZZETTI 5209 19mm x 1.00 Right Hand, Flywheel Exractor Magneto puller. LEM, KTM, Italjet, PW50 and lots of small engines. Tips on use. - Make sure the flywheel thread is clean of dirt and not damaged before screwing the puller in. - Use copper grease on the puller threads, for long life. - Make sure the puller is fully screwed into the flywheel. - After tightening use a hammer on the centre and tap to jolt free [not always need]. - If using old flywheel pullers make sure the threads are in good condition before use to avoid damage to flywheel. Part No. 00-099_B (radhouse.co.uk)

Read more less

M27x1.00 Fly wheel PULLER RIGHT HAND THREAD GAS GAS / HONDA DERBI Senda 50 Minarelli Am6 50   Minarelli engines with Yamaha ignition systems. Also suitable for CPI, Keeway and Chinese Minarelli derived 2-stroke engines. Honda CT70 SL70 Z50 C100 C102 C105. Used for removal of the flywheel or rotor if applicable. Premium quality high carbon steel Heat treated for strength and durability Durable hot black oxide finish. FIR Racing products are a high quality replacement part and Best value for money Please check the image before ordering to avoid mistakes.  Part No. 00-097.DR  [FACTORY IMAGE RACING] (radhouse.co.uk) Tips on use. - Make sure the flywheel thread is clean of dirt and not damaged before screwing the puller in. - Use copper grease on the puller threads, for long life. - Make sure the puller is fully screwed into the flywheel. - After tightening use a hammer on the centre and tap to jolt free [not always need]. - If using old flywheel pullers make sure the threads are in good condition before use to avoid damage to flywheel. Cross Reference Numbers Only: MX-12280-1, 08-0026, 2007 Honda CR125R 2006 Honda CR125R 2005 Honda CR125R 2004 Honda CR125R 2003 Honda CR125R 2002 Honda CR125R 2001 Honda CR125R 2000 Honda CR125R 1999 Honda CR125R 1998 Honda CR125R 1997 Honda CR125R 1996 Honda CR125R 1995 Honda CR125R 1994 Honda CR125R 1993 Honda CR125R 1992 Honda CR125R 1991 Honda CR125R 1990 Honda CR125R 1989 Honda CR125R Suzuki RM 60 2003 Suzuki RM 65 2003-2005 Suzuki DS 80 1978-2000 Suzuki LT 80 1987-2006 Suzuki DR 100 1983-1990 Suzuki RM 100 2003 Suzuki DR 125 1982-1988 Suzuki DRZ 125 2003-2009 Suzuki DRZ 125 2012-2013 Suzuki DRZ 125 (CAN) 2010 Suzuki DRZ 125L 2003-2009 Suzuki DRZ 125L 2012-2013 Suzuki DRZ 125L (CAN) 2010 Suzuki LT 125 1983-1987 Suzuki LT 125 Suzuki RM 125 1996-2007 Suzuki RM 125 2008 (Non-USA model) Suzuki LT 160E 1989 Suzuki ALT 185 1985 Suzuki DR 200 1986-1988 Suzuki LT 250R 1985-1990 Suzuki RM 250 1989-2008 Suzuki RMX 250 1989-1998 Yamaha YZ 250 2000-2018 Yamaha YZ 250F 2001-2002 Yamaha YZ 250F 2004-2013 Yamaha RZ 350 1984-1985 Yamaha XT 350 1985-2000 Yamaha YFZ 350 1987-2006 Yamaha YZ 400F, 1998 to 1999 Yamaha YZ 426F 2000-2002 Yamaha YZ 450F 2003-2005 Yamaha SR 500 1978-1981 Yamaha TT 500 1976-1981 Yamaha XT 500 1976-1981

Read more less

FLYWHEEL PULLER EXTRACTOR 18mm x 1.50mm RH. BUZZETTI 5208 YAMAHA MX CROSS YZ125/250, Used for removal of the flywheel or rotor if applicable. Premium quality high carbon steel Heat treated for strength and durability Durable hot black oxide finish Part No. 00-096_B (radhouse.co.uk)Cross reference numbers. BUZZETTI 5208, UP-12919 Tips on use. - Make sure the flywheel thread is clean of dirt and not damaged before screwing the puller in. - Use copper grease on the puller threads, for long life. - Make sure the puller is fully screwed into the flywheel. - After tightening use a hammer on the centre and tap to jolt free [not always need]. - If using old flywheel pullers make sure the threads are in good condition before use to avoid damage to flywheel.

Read more less

Flywheel Puller 30mm x 1.5-RH-External Female K&L 35-5938 Suzuki Suzuki DR200SE 2004 - 2009 Suzuki LT-F160 QuadRunner 1989 - 2001 Suzuki LT160E 1991 - 1992 Suzuki LT230E QuadRunner 1987 - 1993 Suzuki LT230GE 1985 - 1986 Suzuki LT230S QuadSport 1985 - 1988 Suzuki LT250EF 1985 - 1987 Suzuki LT250R QuadRacer 1985 - 1992 Suzuki LT250S 1989 - 1990 Suzuki TM125 1970 - 1975 Suzuki TM250 1970 - 1975 Suzuki TM400 1970 - 1975 Suzuki TS250 1970 - 2009 LT160/LT230/LT230G/LT250E/STM/MX Series 125/250/400 all years, TS250 Enduros. Also know to fit LT-F160N Quadrunner models. EARLY DR 4 STROKE MODELS. HARLEY 2-CYCLES 1969 Suzuki TS2501 Savage 1970 Suzuki TS2502 Savage 1971 Suzuki TM400R 1971 Suzuki TS250R Savage 1972 Suzuki TM250J 1972 Suzuki TM400J 1972 Suzuki TS250J Savage All pullers made to precise standards equal to factory original tools or better. Each tool and bolts are black oxide plated for rust protection. Tool hardness is softer than the motorcycle part to prevent damage to expensive crankshafts and flywheels. 5/8in. fine thread bolts used in all pullers. Tips on use. - Make sure the flywheel thread is clean of dirt and not damaged before screwing the puller in. - Use copper grease on the puller threads, for long life. - Make sure the puller is fully screwed into the flywheel. - After tightening use a hammer on the centre and tap to jolt free [not always need]. - If using old flywheel pullers make sure the threads are in good condition before use to avoid damage to flywheel. Part No. 00-095 (radhouse.co.uk) Cross Reference Numbers Only:MP8

Read more less

The Flywheel Puller M20 x 1.5 R.H. External Thread is a specialized tool designed for the removal of flywheels or rotors on various motorcycle models. Manufactured from premium high-carbon steel, it is heat-treated for enhanced strength and durability, ensuring reliable performance during maintenance tasks. The tool features a durable hot black oxide finish and is laser-etched with the Motion Pro logo and part number for easy identification. Features: Designed for the removal of flywheels or rotors Premium high-carbon steel construction Heat-treated for enhanced strength and durability Durable hot black oxide finish Laser-etched with Motion Pro logo and part number Specifications: Thread Size: M20 x 1.5 R.H. external thread Material: High-carbon steel Finish: Hot black oxide Cross Reference Numbers: 08-0086 07933-3950000 Compatible Models: TRX250 1985–1987 TRX300 1988–2000 TRX350 1986–1989 TRX400 1995–2008 TRX450 1998–2004 TRX500 2001–2014 ATC250 1981–1986 ATC Big Red 1982–1987 CB400 1978–1981 CB450 1965–1974 CM400 1979–1982 CM450 1982–1983 CX500 1978–1983 CX650 1983 GL500 1981–1982 GL650 1983 MR250 1976–1977 NX250 1988–1990 PC800 1989–1998 VF700 1984–1987 VF750 1982–1988 VF800 1998–2001 VF1100 1983–1986 VT700 1984–1987 VT750 1983–2024 CBR600RR 2003–2024 XR250 1979–2004 XR600 1985–2000 XL650 2000–2007

Read more less

Internal Male MP21 Flywheel Puller 20mm x 1.5-RH-Internal Male. K&L 35-5945 Flywheel puller for 1976 Honda MR250 Elsinore, 1978-1979 Honda CB400A/T, CB450SC, CM450, CMX450C, CX500, CX650, GL500, GL650, MR250, NX250, PC800, 1981 Honda GL500I Silver Wing Interstate, 1981 Honda GL500 Silver Wing, 1982 HondaGL500I Silver Wing Interstate, 1982 Honda GL500D Silver Wing Deluxe UK Models, 1982 Honda GL500 Silver Wing, 1983 Honda VT750C Shadow, 1983 Honda GL650I Silverwing Interstate, 1983 Honda GL650 Silverwing, 1983 Honda GL500D Silver Wing Deluxe UK Models, 1984 Honda VT700C Shadow, 1984 Honda TRX250 Fourtrax, 1984 Honda GL650D2 Silverwing Deluxe UK Models, 1985 Honda VT700C Shadow, 1985 Honda VT1100C Shadow, 1985 Honda TRX250 Fourtrax, 1985 Honda GL650D2 Silverwing Deluxe UK Models, 00-094.MP CX650C 83, CX650TC 83, GL650 83, VF700C 87, VF750C 88, VT700C 84-87, VT750C 83, VFR800FI 98-00, VT800C 88, PC800 89-98, CBR900RR 00-03, VT1100C . Honda XR400 00-03, XR650R 00-05. ATC250ES 85-87, ATC250SX 85-87, ATC350X 85-86, TRX250 85-87, TRX300FW, TRX300EX 93-02, TRX350 86-87, TRX350D 86- 87, TRX400EX 99-02 All pullers made to precise standards equal to factory original tools or better. Each tool and bolts are black oxide plated for rust protection. Tool hardness is softer than the motorcycle part to prevent damage to expensive crankshafts and flywheels. 5/8in. fine thread bolts used in all pullers. Tips on use. - Make sure the flywheel thread is clean of dirt and not damaged before screwing the puller in. - Use copper grease on the puller threads, for long life. - Make sure the puller is fully screwed into the flywheel. - After tightening use a hammer on the centre and tap to jolt free [not always need]. - If using old flywheel pullers make sure the threads are in good condition before use to avoid damage to flywheel. Cross reference numbers ONLY. 07933-3950000, MP21, Part No. 00-094.KL (radhouse.co.uk). Honda ATC250ES 1985 - 1988 Honda ATC250SX 1985 - 2000 Honda ATC350X 1983 - 1989 Honda CB400A Hondamatic 1978 Honda CB400TI Hawk I 1978 - 1979 Honda CB400TII Hawk II 1978 - 1979 Honda CM400A Hondamatic 1979 Honda CM400T 1979 Honda CX500 1978 - 1979 Honda CX500C Custom 1979 Honda CX500D Deluxe 1979 Honda TRX250 1985 - 2011 Honda TRX250R 1987 - 1988 Honda TRX250X 1986 - 2011 Honda TRX300 FourTrax 1988 - 2000 Honda TRX300EX Sportrax 1986 - 2011 Honda TRX300FW FourTrax 4x4 1988 - 2000 Honda TRX350D 1987 - 1988 Honda TRX400EX Sportrax 1999 - 2002 Honda VF700C Magna 1987 Honda VF750C Magna 1988 Honda VT1100C Shadow 1987 - 2003 Honda VT1100C Shadow Spirit 1997 - 2007 Honda VT1100C2 Shadow ACE 1995 - 1999 Honda VT1100C2 Shadow Sabre 2000 - 2007 Honda VT1100C3 Shadow Aero 1998 - 2000 Honda VT1100T Shadow ACE Tour 1998 - 2000 Honda VT800C Shadow 1988 Honda XR250 1979 - 1980 Honda XR250L 1991 - 1996 Honda XR250R 1981 - 1994

Read more less

Flywheel Puller 20mm x 1.5-RH-External Thread, Hollow Equivalent to Honda tool 07933-3950000. Used for removal of the flywheel or rotor if applicable. Premium quality high carbon steel. Heat treated for strength and durability. Durable hot black oxide finish. Application Bellow. Hollow center to puller. Part No. 00-094.FIR  [FACTORY IMAGE RACING] (radhouse.co.uk) Cross reference numbers ONLY. REPLACES 00-094.DR, Honda tool 07933-3000000 Tips on use. - Make sure the flywheel thread is clean of dirt and not damaged before screwing the puller in. - Use copper grease on the puller threads, for long life. - Make sure the puller is fully screwed into the flywheel. - After tightening use a hammer on the centre and tap to jolt free [not always need]. - If using old flywheel pullers make sure the threads are in good condition before use to avoid damage to flywheel. Flywheel puller for 1976 Honda MR250 Elsinore, 1978-1979 Honda CB400A/T, CB450SC, CM450, CMX450C, CX500, CX650, GL500, GL650, MR250, NX250, PC800, 1981 Honda GL500I Silver Wing Interstate, 1981 Honda GL500 Silver Wing, 1982 Honda GL500I Silver Wing Interstate, 1982 Honda GL500D Silver Wing Deluxe UK Models, 1982 Honda GL500 Silver Wing, 1983 Honda VT750C Shadow, 1983 Honda GL650I Silverwing Interstate, 1983 Honda GL650 Silverwing, 1983 Honda GL500D Silver Wing Deluxe UK Models, 1984 Honda VT700C Shadow, 1984 Honda TRX250 Fourtrax, 1984 Honda GL650D2 Silverwing Deluxe UK Models, 1985 Honda VT700C Shadow, 1985 Honda VT1100C Shadow, 1985 Honda TRX250 Fourtrax, 1985 Honda GL650D2 Silverwing Deluxe UK Models, 1985 Honda ATC350X, 1985 Honda ATC250SX, 1985 Honda ATC250ES Big Red, 1986 Honda VT700C Shadow, 1986 Honda VT1100C Shadow, 1986 Honda TRX250 Fourtrax, 1986 Honda GL650D2 Silverwing Deluxe UK Models, 1986 Honda ATC350X, 1986 Honda ATC250SX, 1 00-094.KL" Honda ATC250ES Big Red, 1986 Honda VT700C Shadow, 1986 Honda VT1100C Shadow, 1986 Honda TRX250 Fourtrax, 1986 Honda GL650D2 Silverwing Deluxe UK Models, 1986 Honda ATC350X, 1986 Honda ATC250SX, 1986 Honda ATC250ES Big Red, 1987 Honda VT700C Shadow, 1987 Honda VT1100C Shadow, 1987 Honda VF700C Magna, 1987 Honda TRX250X Fourtrax, 1987 Honda TRX250 Fourtrax, 1987 Honda ATC250SX, 1987 Honda ATC250ES Big Red, 1988 Honda VT800C Shadow, 1988 Honda VT1100C Shadow, 1988 Honda VF750C Magn 00-094.MP"  

Read more less