Factory Image Racing

- Factory Image Racing Fork Cap Wrench 49mm/50mm Dual Ended - Fits late-model RMs and CRs. - Can be used for adjusting compression dampening on late-model RMs. - For easy removal and installation of fork caps. - Designed to prevent “rounding” the top of the fork cap. - Ultra tough durable finish Black. - Overall length 9-3/4” inches for superior leverage. Part No. 00-7828.FIR (radhouse.co.uk)

Read more less

A professional-grade fork cap spanner wrench designed specifically for KTM models equipped with 48mm WP fork caps. The tool allows removal of fork caps without the need to remove handlebars, and features a robust 4-pin design for precise engagement. Features 4-pin spanner wrench design allows loosening of 48mm WP fork caps without removing handlebars Pins designed specifically for the task to ensure proper engagement Specifications Weight approximately 0.272kg Vehicle Fitments KTM models equipped with 48mm WP fork cap

Read more less

Cartridge Rod Holding Plate Tool. The Cartridge Rod Holding Tool allows you to more easily disassemble and assemble Showa Twin-Chamber as well as most street cartridge forks. The tool holds back the spring allowing you to loosen or tighten the bottom nut or the fork cap on the cartridge rod. Plastic design keeps shafts from being marred. SIZE. LENGTH 84mm - WIDTH 38mm - THICKNESS 6mm.

Read more less

Fork Compression Damping Adjuster Tool. This adjusting tool is flat and has a tip on the bottom so it easily fits between the handlebar and top of the fork tube on almost all setups.

Read more less

Factory Image Racing (FIR) Rim Shield Guards Features: Prevents tyre levers from damaging rims during tyre changes. Double-raised tire bead for easy insertion of the tyre lever into the tyre bead. Easy to use design prevents tyre levers from slipping without damaging wheels. Crafted from high-quality ABS materials for superior strength and exceptional durability. Specifications: Product Name: Rim Shield Guards Colour: Red Material: ABS Size: Approximately 5.5 x 4.25 inches (13.97 x 10.80 cm) Packing List: Includes 2 Rim Protectors for Tyre Changing Notes: Please note that there may be a slight colour difference in the product due to lighting effects and shooting angles. Product size may have a slight tolerance due to manual measurement.

Read more less

This motorcycle chain breaker, press and riveter is a universal tool for removing chain pins and fitting master links during chain servicing. Its movable anvil block selects the operation needed to break a chain, press a master-link plate or rivet a master-link pin. Features Removes chain pins, presses master-link plates and rivets hollow nose and soft nose master-link pins. Suitable for O-ring and non-O-ring chains. Indexing letters on the anvil and tool body indicate the correct configuration. Can be supported in a vice or held using the included handle. Components store on the tool when not in use. Compact and light enough to carry in a tool bag for trail-side repairs. Specifications Chain compatibility: 520, 525 and 530. Construction: all steel, with heat-treated components. Kit Contents One motorcycle chain breaker, press and riveter. Handle and spare pin. Protective plastic case for storing the tool and its components. Cross-Reference OEM Part Numbers 08-0470

Read more less

hock Spring Preload Adjusting Wrench KTM [Black] Suspension Tool [FACTORY IMAGE RACING] KTM 125SX 2016-2017, 150SX 2016-2017, 250SX 2017, SX-F 2016-2017, HUSQVARNA TC125 2016, FC 2016 This professional-grade motorcycle tool is for adjusting preload on rear shock springs without removing the shock. Designed to loosen or tighten the shock adjusting collar without using a damaging punch. Makes trackside adjustments a breeze, very fast and easy to use. Material: Billet Aluminum 6061-T6. Surface Processing: Hard black Anodized coating finish. Sold Each. FIR-BRAND products are of high quality. Tools, Accessories, and Parts all Cross reference numbers ONLY: ASOT-371

Read more less

FORK CAP REMOVAL Wrench (Black) 48MM Suspension Tool [FACTORY IMAGE RACING] KTM 125 SX 2016-2017, 150 SX 2016-2017, 250 SX 2016-2017, 250 SX-F 2016-2017, 350 SX-F 2016-2017, 450 SX-F 2016-2017 This professional-grade motorcycle tool is for use on front forks. Fork Cap Wrench 48mm, Dual chamber with rod stopper end. Material: Steel, Heat Treatment for durability. Surface Processing: Hard black electro-coating finish. Open wrench design for easy operation in small spaces. The opposite end of the wrench is a rod stopper to hold the piston rod when removing the piston inner cartridge. Socket hole available for a torque wrench. (Socket size is 9.5 sq = 3 / 8 inch). This tool will allow you to remove the front fork cap without damage. Sold Each. FIR-BRAND products are of high quality. Tools, Accessories, and Parts all Cross reference numbers ONLY: ASOT-376

Read more less

FORK CAP REMOVAL Wrench (Black) 50MM SHOWA/KYB/WP Suspension Tool [FACTORY IMAGE RACING] KTM 125-150 SX 2007-2015, 250 SX 2007-2015, 250 SX-F 2007-2015, 350 SX-F 2011-2015, 450 SX-F 2007-2015, 150 XC 2010-2013, 250 XC 2008-2013, 300 XC 2008-2013, 300 XC-F 2008-2013, 450 XC-F 2008-2013, HONDA CRF 250R 2004-2017, CRF 450R 2004-2008, CRF 250X 2006-2017, CRF 450X 2005-2017, SUZUKI RM 125 2006-2008, RM 250 2007-2008, RM Z250 2007-2015, RM Z450 2005-2014, KAWASAKI KX 250F 2006-2016, KX 450F 2015-2017 This professional-grade motorcycle tool is for use on front forks. Fork Cap Wrench 50mm SHOWA/KYB/WP, Dual chamber with rod stopper end. Material: Steel, Heat Treatment for durability. Surface Processing: Hard black electro-coating finish. Open wrench design for easy operation in small spaces. The opposite end of the wrench is a rod stopper to hold the piston rod when removing the piston inner cartridge. Socket hole available for a torque wrench. (Socket size is 9.5 sq = 3 / 8 inch). This tool will allow you to remove the front fork cap without damage. Sold Each. FIR-BRAND products are of high quality. Tools, Accessories, and Parts all Cross reference numbers ONLY: ASOT-291, 214177

Read more less

FORK CAP REMOVAL Wrench (Black) 49MM KAYABA KYB Suspension Tool [FACTORY IMAGE RACING] HONDA CRF 450R 2009-2013, YAMAHA YZ 125 2006-2014, YZ 250 2006-2014, YZ 250F 2006-2015, YZ 450F 2006-2015, KAWASAKI KX 450F 2006-2014 This professional-grade motorcycle tool is for use on front forks. Fork Cap Wrench 49mm KYB Dual chamber with rod stopper end. Material: Steel, Heat Treatment for durability. Surface Processing: Hard black electro-coating finish. Open wrench design for easy operation in small spaces. The opposite end of the wrench is a rod stopper to hold the piston rod when removing the piston inner cartridge. Socket hole available for a torque wrench. (Socket size is 9.5 sq = 3 / 8 inch). This tool will allow you to remove the front fork cap without damage. Sold Each. FIR-BRAND products are of high quality. Tools, Accessories, and Parts all Cross reference numbers ONLY: ASOT-290, UTP3004, 214176

Read more less

COMBINATION FORK CAP REMOVAL Wrench (Black) 48MM KYB Suspension Tool [FACTORY IMAGE RACING] KTM SX SXF 125/250/350/450/530 2007-2015 This professional-grade motorcycle tool is for use on front forks. Fork Cap Wrench 48mm KYB Dual chamber cartridge fork, With rod stopper end. The large end is for removing the top cap screw from the fork leg, and the forked end is for holding the rebound adjusters. There's also a cool bottle opener in the middle. Material: Aluminum 6061-T6. Surface Processing: Hard black anodized coating finish. Open wrench design for easy operation in small spaces. The opposite end of the wrench is a rod stopper to hold the piston rod when removing the piston inner cartridge. This tool will allow you to remove the front fork cap without damage. Sold Each. FIR-BRAND products are of high quality. Tools, Accessories, and Parts all Note: The EXC with its 4CS forks are different. Cross reference numbers ONLY: ASOT-314

Read more less

SPINDLE WRENCH 5 in 1 FRONT AXLE TOOL. [FACTORY IMAGE RACING] - This professional grade, motorcycle front wheel removal tool. For quick and easy front wheel removal.- 5 size: 14, 17, 19, 22 and 24mm hexagon.- Material: SCM440, Heat Treatment: HRC38-42.- Surface Processing: Chemical Nickel Plating.- Use with 3/8in. SQ. DR. on both ends and hex wrench. - This tool will allow you to remove the front wheel on any motorcycle that has a 14, 17, 19, 22 and 24 mm female hex on the wheel or an where else a large hex is needed.- Sold Each.- FIR-BRAND products are a high quality. Tools, Accessories and Part all 17mm is for use with Triumph motorcycles 19mm is for use with Yamaha motorcycles 22mm is for use with Kawasaki motorcycles 24mm is for use with Suzuki & Honda motorcycles

Read more less

The Combination Bleeder Tool Set (SKU 00-7430.FIR) is a workshop tool under the Brake & Clutch Tools category, designed for combination bleeder applications. Packaged by Factory Image Racing, the set weighs 0.716kg and is presented as a trade-only item with limited stock availability. Specifications Weight 0.716 kg

Read more less

CHAIN CUTTER With folding Handle. Fits 420 to 530 chain sized O-Ring and Non O-Ring Chain. Will push link pin completely through link / side plate. Handle folds away for easy storage. Durable drive pin is heat treated for strength and wear resistance. Max pin extension to drive out chain links is 18mm. The maximum pin extension required to drive out the chain link is determined by measuring your chains width from outside face plate to outside face plate. Important tip. On top end HD chains it is best to grind the head off the rivet before splitting chain. Before use put some copper grease on thread. FIR-BRAND products are a high quality. Tools, Accessories and Part all Note: Not all handles have the Black pvc cover on them. FIR-BRAND products are a high quality. Tools, Accessories and Part all Please see image before ordering to avoid mistakes.     Part No. 00-741.FIR FIR-BRAND [FACTORY IMAGE RACING] (radhouse.co.uk) Cross reference numbers ONLY.L35-246, 00-741.DR, 08-0001, 108-001,

Read more less

HARD PIN FOR THE 00-740 CHAIN CUTTER Part No. 00-740~PIN (radhouse.co.uk)

Read more less

The Factory Image Racing Heavy Duty Chain Breaker is designed for quickly and efficiently breaking chains of various sizes. Its durable construction and heavy-duty pin ensure reliability, while its compact design makes it convenient for carrying on the trail, in a pack, or in a toolbox. Features Heavy-duty pin for breaking chains of various sizes Efficient design allows chains to be broken within seconds Compact and portable for easy storage and transport Specifications Compatible with chain sizes 415-520 Chain cutter/splitter design Suitable for motorcycle, ATV, dirt bike, and enduro applications

Read more less

HARD TIP PUSH IN TYPE Tip for 00-730 Chain breaker. Please check when purchasing replacement tips, if is screw type or push in type. Part No. 00-732.PI (radhouse.co.uk)

Read more less

HARD TIP SCREW IN TYPE Tip for 00-730 Chain breaker. Please check when purchasing replacement tips, if is screw type or push in type. Part No. 00-732.BK (radhouse.co.uk)

Read more less

CHAIN BREAKER PIN & T-BAR This tool is very easy to use and will cut 415 to 530 chains. Please check when purchasing replacement tips if is screw in type or push in type. Part No. 00-731 (radhouse.co.uk)

Read more less

This chain cutting and breaker tool is a heavy-duty link removal tool designed for use with motorcycle chains, including O-ring and X-ring types. Suitable for chain pitches from 415 to 530, it allows accurate adjustment and resizing of chains. Constructed from high-quality steel with a soft-grip handle, this tool is compatible with most classic motorcycles from the 1950s through 2018. For tougher HD chains, grinding off the rivet head before splitting is recommended. Spare parts are available and must be matched according to push-in or screw-in tip type. Features Heavy-duty chain breaker for link removal Suitable for chain sizes up to 5/8 x 3/8, including O and X-ring chains (pitch 415–530) Allows precise chain cutting and adjustment Compatible with most classic motorcycles (1950s–2018) High-quality steel construction Soft-grip handle for comfortable use Approximate tool length: 6" Important tip: Grind rivet head off on HD chains before use Please check image before ordering Replacement tips must match tool type (push-in or screw-in) Specifications Compatible Chain Pitches: 415 to 530 Tool Length: Approximately 6 inches Handle: Soft grip Material: Steel Replacement Parts: Replacement Pin & Tee Bar: 00-731 Replacement Tip (Push-in Type): 00-732.PI Replacement Tip (Screw-in Type): 00-732.BK

Read more less

4 in 1 Internal and External Snap Ring Circlip Plier Designed to permit easy assembly and disassembly of machinery and equipment that utilize circlips. Internal/ External pliers with straight jaws are designed for applications where easy straight on access is available to the circlip, the bent jaw versions introduce flexibility into the access of these circlips 1. Straight internal card, wild card bending internal card, wild card 2. Angle of clamping spring head is 90 degrees 3. Set aside 3 tongs with a service range of 10-15mm to provide suitable clamping size 4. High soft PVC handle, comfortable to use 5. Scope of use, multi-function spring clamp spring assembly tool set.

Read more less

DEEP 90° Internal Circlip Pliers Professional quality circlip pliers. Manufactured from forged steel. 1.2mm tip diameter. Comfortable rubber grip. 50mm long tip with 90 degree angle for deep reach. Specifications: Made from drop forged steel. 1.2 mm tip diameter. Allows removal of internal snap rings used in hydraulic master cylinders. Comfortable rubber grip. 50 mm long tip with 90 degree angle for deep reach. Can be used to remove and replace small to medium internal snap rings up to 50mm deep, including those used for transmission gear locating, bearing retention, and oil seal retention. Cross reference numbers ONLY: UP-12574, K&L 35-6892

Read more less

This product is a pair of oil filter removal pliers designed to accommodate filters with diameters ranging from 2 inches to 3¼ inches (45 mm to 100 mm). The tool employs a ratchet and lock mechanism that ensures a secure grip on the filter during removal. It is engineered to withstand the rigours of automotive maintenance and facilitate the removal of stubborn filters. Features Handles filters with diameters from 2 to 3¼ (45 mm to 100 mm) Ratchet and lock mechanism for secure grip Durable construction suitable for automotive use

Read more less