Kickstart Parts

KICK START RUBBER ID. 12mm, OD. 17mm, LENGTH 61.5mm. - BLACK Rubber.- Easy and fast to fit.- Classic design. Part No. 18-101.EACH [FACTORY IMAGE RACING] (radhouse.co.uk) Cross Reference Numbers Only:UP-04052

Read more less

This starter lever is a direct OEM replacement specifically designed for Honda XR400R models from 1999 to 2004. Built to fit 16mm splined shafts, it is manufactured to strict specifications to ensure long-lasting reliability and consistent engine starting performance. Features Starter lever designed for 16mm splined shafts Direct OEM replacement for Honda XR400R Manufactured to exacting standards for durability Constructed from high-tech materials for reliable operation Meets or exceeds OEM quality Material Steel Specifications Fitment Type: Starter Lever Shaft Compatibility: 16mm splined shaft Cross-Reference OEM Part Numbers 28300-KCY-761 Vehicle Fitments Honda XR400R (1999–2004)

Read more less

This kick-start lever is a direct OEM-style replacement for selected Yamaha 125cc models, providing a precise fit and dependable operation for starting the engine. Built to high manufacturing standards, it is suitable for routine service or engine rebuilds and supplied as a single lever ready for installation. Features Unmatched reliability and performance using high-tech materials. Manufactured to precise standards to support confident engine rebuilds. Meets or exceeds OEM quality. Direct OEM replacement. Please refer to the image before ordering to ensure correct selection. Offers strong value for money. High-quality replacement part with satisfaction guarantee. Easy to install; if uncertain, professional fitting is recommended. Specifications Part type: Kick-start lever Quantity: 1 lever Spline interface: Approximately 15–15.5 mm outside diameter, 32-tooth spline Cross-Reference OEM Part Numbers 5VL-E5620-00 5VL-E5620-00-00 5VL-E5620-01-00 Vehicle Fitments Yamaha XT125R Yamaha XT125X Yamaha YB125SPD Yamaha YBR125ED Yamaha YBR125E Yamaha YBR125EGS

Read more less

This kick starter start lever is a direct OEM replacement designed for dependable operation and straightforward installation. Manufactured to meet or exceed OEM quality, it provides a precise fit and reliable performance without modification. Features Constructed from high-grade materials for reliability and performance Manufactured to exacting standards for dependable operation Meets or exceeds OEM quality Direct OEM replacement Please review the image before ordering to avoid mistakes Value for money Easy to install; professional assistance recommended if unsure Vehicle Fitments Husky Boy Malaguiti Grizzly LEM 50CC Franco Morini S6E Morini S6T Morini S6S Morini S6C

Read more less

Compatible Models: Installation is straightforward, but if you have any doubts, consider seeking professional assistance.

Read more less

This kickstart lever starter is a replacement starting lever for a range of Honda motorcycles and trail bikes, including CB, CL, SL, XL, Z50, C70, CT70, CT90, S90 and ST90 models. It is designed as a direct OEM-style replacement and manufactured to exacting standards for dependable operation when replacing a worn, damaged or missing original kickstart lever. Features Direct OEM replacement. Designed for reliable and consistent starting operation. Manufactured to exacting standards. Meets or exceeds OEM quality requirements. Produced using high-tech materials for dependable performance. Designed to provide a cost-effective replacement option. Supplied with a satisfaction guarantee. Straightforward to install; professional fitting is recommended if unsure. Check the product image before ordering to confirm the correct lever and avoid compatibility errors. Specifications Overall length: 196 mm. Vehicle Fitments Honda CB100 Super Sport 1970–1973. Honda CB125S 1973–1990. Honda CL100 1973. Honda CL100 Scrambler 1970–1973. Honda CL100S Scrambler 1970–1973. Honda CL125S Scrambler 1973–1974. Honda SL100 Motosport 100 1970–1973. Honda SL125 Motosport 125 1971–1973. Honda XL100 1974–1980. Honda Z50 Mini Trail 1969–1994. Honda C70 1969–1994. Honda CT70 1969–1994. Honda SL70 1969–1994. Honda XL70 1969–1994. Honda CT90 1969–1994. Honda S90 1969–1994. Honda ST90 1969–1994. Honda CS90 1969–1994. Honda CS 70/90 1969–1994. Honda SL 70/90 1969–1994. Honda ST 70/90 1969–1994. Honda CT 70/90 1969–1994.

Read more less

Kickstart Lever - Steel [Black Finish] Compatible Model: Yamaha YFZ350 BANSHEE (1987-2006) Specifications: Hole Diameter: 16.8 mm Width: 20 mm Teeth: 24T Product Features: Direct OEM Replacement: High-quality alternative at a fraction of the OEM cost. Durability: Constructed from forged moly steel for enhanced strength. OEM Standards: Designed to meet or exceed original equipment manufacturer standards. High-Quality Materials: Produced with top-quality materials for reliability and performance. Precision Manufacturing: Built to exacting standards for assured fit and function. Best Value: Economical choice without compromising quality. Note: Check product image before ordering to ensure correct part selection. Cross Reference Numbers (for reference only): AT-08461-1, 2GU-15620-01-00, ASK-300 Vehicle Compatibility Please check the exact model and year before ordering. Manufacturer Model Years YAMAHA YFZ BANSHEE 350 1987-2006

Read more less

This kick start lever rebuild kit is a direct OEM replacement, engineered to deliver reliable performance and long service life. Manufactured from high-tech materials and crafted to precise specifications, it ensures accurate fitment and consistent function during operation. Features Direct OEM replacement: offers a quality replacement at a fraction of the OEM price OEM standards compliance: designed to meet or exceed original equipment standards for reliable performance Premium materials: constructed with high-tech materials for enhanced durability and longevity Precision manufacturing: crafted to exacting standards to ensure a perfect fit and dependable function Best value: provides superior value without sacrificing quality Important: check the product image before ordering to confirm compatibility and prevent ordering mistakes Cross-Reference OEM Part Numbers 90152-06010-00 90501-12081-00 93210-14369-00 Vehicle Fitments Yamaha YFZ350 Banshee (1987–2006) Vehicle Compatibility Please check the exact model and year before ordering. Manufacturer Model Years YAMAHA YFZ BANSHEE 350 1987-2006

Read more less

Kick start pedal lever designed for kids’ ATVs and small-displacement applications, serving as a direct replacement for the original kick starter lever on compatible Dinli, E-Ton and selected Polaris, Yamaha and GY6-based models. Features Direct replacement for the original kick start pedal lever Fits kick starter spindle applications on compatible models Manufactured to meet or exceed original equipment standards Intended as a cost-effective alternative to the original part Verify image and specifications prior to purchase to confirm compatibility Does not fit Sierra DXL-90 Cross-Reference OEM Part Numbers 610136 0450183 Vehicle Fitment Dinli 50cc 70cc 90cc 100cc 110cc E-Ton 50cc 70cc 90cc 2 stroke 50 2 stroke 70 2 stroke 90 Viper 50 2stk (RXL-50) Viper 50M (RXL-50M) Viper 70 2stk (RXL-70) Viper 90 2stk (RXL-90) Viper 90R 2stk (RXL-90R) Impuls TXL-50 (TXL-50) TXL-90 (TXL-90) Lightning Lightning-50 (AXL-50/NXL-50) Polaris 2 stroke 50 ATV 2 stroke 70 ATV 2 stroke 90 ATV Predator 50 Predator 90 (2003-2006) Outlaw 90 (2007-2016) Sportsman 90 (2007-2016) Scrambler 50 (2001-2003) Thunder Thunder-90 (AXL-90/NXL-90) Yamaha Raptor 90 (2009-2013)

Read more less

YX 140 160 Dirt Bike Kick Start Pedal 16mm Shafter Hole ID YX 140 160 Dirt Bike Kick Start Pedal 16mm Shafter Hole ID - Direct OEM replacement as a fraction of the cost. - Forged Moly Steel. - Meets or exceeds OEM standards. - FIR products are a high quality replacement part and - Please see image before ordering to avoid mistakes. - Best value for money. Cross Reference Numbers Only:  Yamaha ATV 1988 BANSHEE - YFZ350U Starter Yamaha ATV 1989 BANSHEE - YFZ350W Starter Yamaha ATV 1990 BANSHEE - YFZ350A Starter Yamaha ATV 1991 BANSHEE - YFZ350B_MN Starter Yamaha ATV 1992 BANSHEE - YFZ350D Starter Yamaha ATV 1992 BANSHEE - YFZ350D_MN Starter Yamaha ATV 1993 BANSHEE - YFZ350E Starter Yamaha ATV 1993 BANSHEE - YFZ350E_MN Starter Yamaha ATV 1994 BANSHEE - YFZ350F_MN Starter Yamaha ATV 1995 BANSHEE - YFZ350G Starter Yamaha ATV 1995 BANSHEE - YFZ350G_MN Starter Yamaha ATV 1994 BANSHEE - YFZ350F Starter Yamaha ATV 1996 BANSHEE - YFZ350H_MNH Starter Yamaha ATV 1996 BANSHEE - YFZ350H Starter Yamaha ATV 1996 YFG350H_MNH Starter Yamaha ATV 1997 BANSHEE - YFZ350J Starter Yamaha ATV 1997 BANSHEE - YFZ350J_MNH Starter Yamaha ATV 1998 BANSHEE - YFZ350K Starter Yamaha ATV 1999 BANSHEE - YFZ350L Starter Yamaha ATV 2000 BANSHEE - YFZ350M Starter Yamaha ATV 2001 BANSHEE - YFZ350N Starter Yamaha ATV 2002 BANSHEE - YFZ350P Starter Yamaha ATV 2003 BANSHEE - YFZ350R Starter Yamaha ATV 2003 LIMITED EDITION - YFZ350LER Starter Yamaha ATV 2004 BANSHEE - LIMITED EDITION BLACK - YFZ350LES Starter Yamaha ATV 2004 BANSHEE - YFZ350S Starter Yamaha ATV 2004 BANSHEE LIMITED EDITION BLACK (Yamaha Black) - YZF350LES Starter Yamaha ATV 2005 BANSHEE - YFZ350T Starter Yamaha ATV 2005 BANSHEE SE - YFZ350SET Starter Yamaha ATV 2006 BANSHEE - YFZ350V Starter Yamaha ATV 2006 BANSHEE SP - YFZ350SPV Starter Yamaha ATV 2006 BANSHEE SE - YFZ350SEV Starter

Read more less

KICKSTART LEVER PEDAL STEEL.   BLACK. (20MM COARSE SPLINE) SUZUKI TS125ERZ, RM100/RM125 1979-1981, SP250Z/D/F (82-85), LT250R QUAD 1985-1989, RMX250T   1989-1998, SP370, / SP500, DR250 1982-1985, DR370 1978-1979, DR400 / DR500, PE175 1977-1984 , PE250 1977-82 - Spline size 18.20/20.00mm. - Meets or exceeds OEM quality. - Direct oem replacement. - FIR products are a high quality replacement part and - Please check the image before ordering to avoid mistakes. Part No.       35-596   FIR [FACTORY IMAGE RACING]   (radhouse.co.uk) Cross Reference Numbers Only: MX-08092 , K&L 28-1527, 26300-41201, 26300-41203, 26300-38200, MX-08092, MX-08092, KSK-98, MX-08968, 35-9804.DR, 26300-38220, 26300-38211,26300-38210, 26300-38201, 26300-38200, EMGO 83-61621, Cross reference numbers ONLY. 26300-48700, 26300-38201, 28-1527, 26-61621, 26300-38201 / 26300-40203 / 26300-32401/ 26300-37301, 35-9804.DR, 26300-40203, 26300-14100, 26300-14100, 26300-28E20, 26300- 41201, 26300-41203, 26300-38200, 26300-41201, K&L 28-1527, KSK-98, MX-08968, 35-9804.DR, KICKSTARTER STEEL RM / TS Fits many models. Approx size 255mm long with 18.2/20mm coarse spline. RM100 1979-81 RM125 1981-83 PE175 1977-84 PE250 1977-82 RM250 1976-89 RMX250 1989 RM370 1976-77 PE400 1980-82 RM465 1981-82 RM125 '79 26300-40203 DR250 '82-'85 26300-38201 SP250 '82-'83 26300-32401 DR370 '78-'79 26300-32401 RM400 '80 26300-32401 SP370 '78-'79 26300-32401 DR400 '80 26300-32401 SP400 '80 26300-32401 GN400 '80-'82 26300-37301 DR500 '81-'83 26300-37401 SP500 '81-'83 26300-37401 DR600S '85 26300-38201 DR600R '86-'89 26300-38201 S/SEED FROM 35-9804.FIR TO 35-596.FIR Vehicle Compatibility Please check the exact model and year before ordering. Manufacturer Model Years SUZUKI RMX 250 1989 SUZUKI RM 370 1976-1977 SUZUKI RM 465 1981-1982 SUZUKI RM 125 1981-1983 SUZUKI RM 100 1979-1981 SUZUKI TS ERZ 125 1982 SUZUKI TS ERZ 125 1950-2020 SUZUKI RM 250 1976-1989 SUZUKI PE 175 1977-1984 SUZUKI PE 250 1977-1982 SUZUKI PE 400 1980-1982

Read more less

KICKSTART LEVER ASSEMBLY. STEEL BLACK HONDA XR200R 1986-1993, XL250R 1984-1987, XR250R 1984-1991, XL350R 1984-1986, XR350R 1983-1984, XR500R 1983-1984, XL500 1979-1982, XL600R 1982-1987. - Aprox size. Lever is 270mm long and has 19.5mm Dia. spline.- Black oxide finished assembly for Exact reproduction. - Meets or exceeds OEM quality.- Direct oem replacement. - FIR products are a high quality replacement part and Part No. 35-597 FIR [FACTORY IMAGE RACING] (radhouse.co.uk) Cross reference numbers. EMGO 83-61612, 28300-KK0-000, 28300-KT1-670, 28300-KT1-671, 28300-KK0-000, 28300-KK0-010, 28300-KF0-000, 28300-KF0-000, 28300-429-000, 28300-435-770, 28300-435-770, 28300-KT1-000, 28300-KFO-000, 28300-MMO-620, 83-61612, ASK-42, XR250R '84-'8528300-KK0-000XR250R '86 28300-KT1-670XR250R '87-'91 28300-KT1-671XL250R '84-'86 28300-KK0-000XL250R '87 28300-KK0-010XL350R '84-'85 28300-KF0-000XR350R '83-'84 28300-KF0-000XL500S '79 28300-429-000XL500S '80-'81 28300-435-770XL500R '82 28300-435-770XR500R '83-'84 28300-KT1-000XL600R '82-'8428300-KFO-000XL600R '85-'8628300-MMO-620 Vehicle Compatibility Please check the exact model and year before ordering. Manufacturer Model Years HONDA XR R 500 1983-1984 HONDA XR R 350 1983-1984 HONDA XL R 350 1984-1985 HONDA XL 350 1984-1985 HONDA XR R 350 1984-1987 HONDA XL R 600 1983-1984

Read more less

This 16 mm kick-start lever is intended for the kick-start mechanism on selected Honda XR and XL motorcycles, providing a replacement foot-operated lever for manually turning the engine during starting. It is manufactured from engineered materials to exacting standards for reliable operation during repair, restoration or engine rebuild work. Features Direct OEM replacement Meets or exceeds OEM quality standards Designed for reliable and consistent operation Straightforward installation Suitable as a cost-effective replacement component Supplied with a satisfaction guarantee Professional installation is recommended when correct fitting procedures are uncertain Check the product image against the existing lever before ordering Specifications Nominal spline size: 16 mm Cross-Reference OEM Part Numbers 28300-428-000 28300-428-871 28300-KB7-910 28300-KK0-000 28300-KT1-671 28300-435-770 Vehicle Fitments Honda XR200R: 1984–1985 Honda XL250S: 1978–1981 Honda XL250R: 1982–1987 Honda XR250: 1980 Honda XR250L: 1991–1996 Honda XR250R: 1981–1995 Honda XR500: 1980 Honda XR500R: 1981–1982

Read more less

Kick Start Lever 16.5mm Hole Kick Starter Foot Pedal YAMAHA DT230 MT250 HJ250 TSE250 250cc - Black oxide finished assembly for Exact reproduction. - Meets or exceeds OEM quality. - Direct oem replacement. - FIR products are a high quality replacement part and Part No: 35-5980 FIR [FACTORY IMAGE RACING] (radhouse.co.uk)

Read more less

Kickstart shaft and seal supplied as a direct replacement part for engine rebuild and repair applications. Manufactured to exacting standards using high-tech materials to support reliability and performance, and intended to meet or exceed OEM quality requirements. Please see the image before ordering to avoid mistakes, as multiple versions are available and dimensions should be checked carefully before purchase. Features Direct OEM replacement Manufactured to exacting standards for reliable engine rebuild work Produced using high-tech materials for reliability and performance Meets or exceeds OEM quality Easy to install Professional installation recommended if unsure Please see the image before ordering to avoid mistakes Multiple versions are available, so dimensions should be checked before ordering Specifications Dimensional tolerance: ±0.5 mm Total length: 95 mm Kick starter spline outer diameter: 13 mm Kick starter spline inner diameter (threaded): 5.3 mm Kick starter spline length: 17 mm Main body length: 42.5 mm Main body diameter: 16.9 mm Gear width: 19 mm Gear diameter: 26 mm Gear teeth: 13 Locating plate thickness: 5 mm Locating plate diameter: 29 mm End pin length: 11 mm End pin outer diameter: 14.85 mm End pin inner diameter: 10.25 mm Cross-Reference OEM Part Numbers 1LX-15660-03-00 1LX-15660-02-00 1LX-15660-01-00 93102-17263-00 Vehicle Fitments Yamaha YZ125S (1986) Yamaha YZ125T (1987) Yamaha YZ125U (1988) Yamaha YZ125W (1989) Yamaha YZ125A (1990) Yamaha YZ125B (1991) Yamaha YZ125D1 (1992) Yamaha YZ125 (YZ125J1) (1997) Yamaha YZ125 (YZ125K1) (1998) Yamaha YZ125 (YZ125L1) (1999) Yamaha YZ125 (YZ125M1) (2000) Yamaha YZ125 (YZ125N1) (2001) Yamaha YZ125 (YZ125P) (2002) Yamaha YZ125 (YZ125R) (2003) Yamaha YZ125 (YZ125S1) (2004)

Read more less

Kickstart axle shaft for Yamaha YZ125, OEM part number 1LX-15660-03-00. This direct replacement component forms part of the kick-starter mechanism (“Starter” assembly) and is engineered for precise fit and dependable operation across the listed YZ125 model years. Features Manufactured to exacting standards for dependable service Meets or exceeds OEM quality Direct OEM replacement Check images and part number before ordering to avoid mistakes Strong value replacement part Straightforward installation; seek professional assistance if unsure Specifications Component: Kickstart axle shaft OEM part number: 1LX-15660-03-00 Application: YZ125 kick-starter (“Starter”) assembly Dimensions (+-0.5mm) Multiple versions of this product are available as replacements for OEM 1LX-15660-03-00. Before ordering, please confirm the dimensions below to ensure it will fit your application. Total Length - 95mm Kick Starter Spline OD - 13mm ID (Threaded) - 5.3mm Length - 17mm Main Body Length - 42.5mm Diameter - 16.9mm Gear Width - 19mm Diameter - 26mm 13 Gears Locating plate Thickness - 5mm Diameter - 29mm End Pin Length - 11mm OD - 14.85mm ID - 10.25mm Cross-Reference OEM Part Numbers 1LX-15660-03-00 1LX-15660-00-00 Vehicle Fitments 1986 YZ125S – Starter 1987 YZ125T – Starter 1988 YZ125U – Starter 1989 YZ125W – Starter 1990 YZ125A – Starter 1991 YZ125B – Starter 1992 YZ125D1 – Starter 1997 YZ125 (YZ125J1) – Starter 1998 YZ125 (YZ125K1) – Starter 1999 YZ125 (YZ125L1) – Starter 2000 YZ125 (YZ125M1) – Starter 2001 YZ125 (YZ125N1) – Starter 2002 YZ125 (YZ125P) – Starter 2003 YZ125 (YZ125R) – Starter 2004 YZ125 (YZ125S1) – Starter

Read more less

This black kick-start lever assembly is a replacement starter lever for selected Yamaha two-stroke motorcycles. It is used to engage the engine manually during kick-starting and serves as a direct replacement when the original lever is worn, damaged, or missing. The lever is intended to restore standard starting operation while retaining the original mounting arrangement. Features Direct replacement for the original starter lever Uses the original mounting locations Manufactured to OEM specifications with OEM-level quality and appearance Designed to handle increased power loads Cost-conscious replacement part Specifications Component type: Kick-start lever / starter lever assembly Finish colour: Black Cross-Reference OEM Part Numbers 2A6-15620-01-00 Vehicle Fitments Yamaha YZ80 Yamaha DT80 Yamaha DT125 Yamaha DT175 Notes Compare the product image with the existing part before ordering. Installation is straightforward, but professional fitting is recommended if you are unsure.

Read more less

A forged steel kickstart lever pedal with a black oxide finish, engineered as a direct OEM-equivalent for reliable operation and straightforward installation. It measures 250 mm in overall length with a 16.50 mm diameter spline and is supplied by Factory Image Racing (FIR) for the applications listed below. Features Compatible with a wide range of Honda models from 1976 to 1983 Direct OEM replacement for easy installation Meets or surpasses OEM quality for consistent performance Black oxide finish for accurate reproduction Visual check recommended: please review the image before ordering to avoid discrepancies Offers the best value for money FIR products guarantee high quality and customer satisfaction Specifications Material: Forged steel Colour: Black Finish: Black oxide Overall length: 250 mm Spline diameter: 16.50 mm Cross-Reference OEM Part Numbers MX-08090 83-61611 28300-428-000 28300-428-871 28300-KK0-000 28300-428-000 28300-428-871 28300-KK0-000 28300-428-000 28300-428-871 28300-KK0-000 28300-KB7-910 28300-435-770 Vehicle Fitments Honda XR200R: 1984-1985 Honda XL250S: 1978-1981 Honda XL250R: 1982-1987 Honda XR250: 1980 Honda XR250L: 1991-1996 Honda XR250R: 1981-1995 Honda XR500: 1980 Honda XR500R: 1981-1982

Read more less

This motorcycle kick starter lever is a replacement starting component for selected Kawasaki models. It mounts in the standard location and provides the mechanical lever action needed to start the engine by foot, making it suitable for replacing a worn, damaged or missing original unit while retaining original-style fit and operation. Features Direct OEM replacement Fits stock mounting locations Provides a secure connection for starting operation Built to OEM specifications Matches original equipment appearance Designed for regular riding conditions Designed to handle increased power loads Easy to install Professional installation is recommended if you are unsure Check the product image before ordering to confirm the correct type Specifications Starter lever diameter: 16 mm Finish: silver Manufactured to meet or exceed OEM quality No high-concern chemicals Cross-Reference OEM Part Numbers 13064-1027 Vehicle Fitments Kawasaki KE125, 1980-1983 Kawasaki KE175, 1980-1983 Kawasaki KLX250, 1979-1980 Kawasaki KL250, 1978-1984 Kawasaki KX125, 1974-1976 and 1978-1981 Kawasaki KX250, 1980-1981 Kawasaki KDX175, 1980-1982 Kawasaki KDX250, 1980-1984 Kawasaki KZ200-A1/A1A, 1978-1979

Read more less

KICKSTART LEVER. STEEL SILVER KAWASAKI KE125/175 1980-1983, KLR250 - KL250 1978-184 KLX250 79-80, Fits lots of Kawasaki from 76-83.Features: -Made from 7075 aerospace aluminium construction. -Hardened steel spline -Forged grooves at the tip of the lever -Smooth shaft design to reduce surface wear. -CNC machined billet flexible tip. -Colour anodised to prevent corrosion. FACTORY IMAGE RACING Kickstart Levers are manufactured with quality forged aluminuim to increase strength and durability. They are specially designed with a hardened steel spline for increased strength. Our Kickstart Levers are also treated with an Anodized surface finish in various colours to increase the longevity and maintain a stylish appearance. Vehicle Compatibility Please check the exact model and year before ordering. Manufacturer Model Years KAWASAKI KLX 250 1979-1980 KAWASAKI KE 175 1980-1983 KAWASAKI KLR 250 1978-1984 KAWASAKI KL 250 1978-1984 KAWASAKI KE 125 1980-1983

Read more less

KICKSTART LEVER ASSEMBLY (16MM FINE SPLINE)  SUZUKI DR200 86-88, TS185 77-81, TS125 78-81, RM125 79, TS100 78-81, RM100 76, SP100 83-84, SP125 82-84, DS 78-81. RM100 '76 SP100 83-84 DR125 '79-'81 SP125 '82-'83 TS125 '77-'81 DR200 '86 DR200S '85-'87 - Lever is 210mm long and has 15.8 / 16mm fine Spline. - Meets or exceeds OEM quality. - Direct oem replacement. - FIR products are a high quality replacement part and Part No.    35-953.EACH  FIR [FACTORY IMAGE RACING]  (radhouse.co.uk) Cross reference numbers. MX-08095, 83-61620, 26300-29303, 26300-29302, 26300-40203, 26300- 05213, 26300-29302, 26300-42A00, 26300-42A00, [Old No. MX-08933] 26300-29302, 26300-29303, 26300-05213, 26300-42A00 RM100 '76 SP100 83-84 RM125 '79 DR125 '79-'81 SP125 '82-'83 TS125 '77 -'81 DR200 '86 DR200S '85-'87 Vehicle Compatibility Please check the exact model and year before ordering. Manufacturer Model Years SUZUKI TS 100 1978-1981 SUZUKI TS 125 1978-1981 SUZUKI TS 185 1977-1981 SUZUKI DS 185 1978-1980 SUZUKI DS 100 1978-1981 SUZUKI DR 125 1982-1984 SUZUKI TS X 185 1984 SUZUKI TS SIERRA 185 1977-1979 SUZUKI TS 185 1984 SUZUKI SP 100 1983-1984 SUZUKI SP 125 1982-1984 SUZUKI RM 100 1976 SUZUKI RM 125 1979 SUZUKI DR 200 1985-1987

Read more less

This Yamaha kickstart lever is a chrome pedal assembly for selected Yamaha and Suzuki off-road and trail models, including DT125 and DT175 models from 1978 to 1981. It is an exact reproduction style replacement intended as a direct OEM replacement, with a 12mm hole, 204 mm overall length and 15 mm offset. This part is supplied under part number 35-955.DR and cross-references a range of OEM and aftermarket numbers including 3AY-15620-00-00 and 2A3-15620-00-00. Features Chrome kick starter pedal assembly Exact reproduction style replacement Direct OEM replacement Suitable for kickstart system restoration or replacement Visual match should be checked before ordering Specifications Spline size: 12 mm Overall length: 204 mm Offset: 15 mm Cross-Reference OEM Part Numbers EMGO 83-61600 K&L 28-1566 3AY-15620-00-00 2A3-15620-00-00 462-15610-00-93 3V6-15620-00-00 4G2-15610-00 DT80 1982-1983: 2A3-15620-00-00 GTMX 1977-1978: 2A3-15620-00-00 GTMX 1979: 2A3-15160-00-91 GT80 1978-1979: 2A3-15620-00-00 GT 1980: 2A3-15610-00-91 MX80 1980-1982: 2A3-15620-00-00 YZ80 1974-1980: 2A3-15610-00-93 Vehicle Fitments Yamaha JT1, JT1L, JT2-60 Mini Enduro, 1971-1972 Yamaha JT2MX60, 1972 Yamaha DT80H, DT80J, DT80K, 1981-1983 Yamaha GT1, GT80A, GT80B, GT80C Enduro, 1973-1976 Yamaha GT80E Enduro, 1978 Yamaha GTMX, GTMXA, GTMXB-80, 1973-1975 Yamaha GTMXC, GTMXD-80, 1976-1977 Yamaha GTMXE, GTMXF-80, 1978-1979 Yamaha MX80G, MX80H, MX80J, 1980-1982 Yamaha YZ80A, YZ80B, YZ80C, YZ80D, 1974-1980 Yamaha AT1, AT1C, AT1MX, AT2, AT3, 1969-1973 Yamaha CT1, CT2, CT3, 1969-1973 Yamaha CS3, CS3B, CS3C, 1970-1971 Yamaha DT80, 1982-1983 Yamaha GTMX, 1977-1979 Yamaha GT80, 1978-1979 Yamaha GT, 1980 Yamaha MX80, 1980-1982 Yamaha YZ80, 1974-1980 Vehicle Compatibility Please check the exact model and year before ordering. Manufacturer Model Years YAMAHA YZ 50 1980 YAMAHA GT 80 1978-1980 YAMAHA MX 80 1980-1982 YAMAHA YZ 80 1974-1980 YAMAHA GT 80 1974-1976 YAMAHA DT 80 1983 YAMAHA DT 80 1981

Read more less