Bearing & Seal Tools

3-Jaw Motorcycle, ATVs, UTVs Car Inner Bearing Puller Tool High-hardness Carbon steel Gear Puller for Automobiles Diagnostic Tools Kit Features: Gear Puller: 220mm Overall Length High-hardness Carbon steel Gear Puller Manufactured with chromium vanadium for high hardness, good toughness, strength, and durability. Best value for money Please check the image before ordering to avoid mistakes. Note: If you are unsure about the operation of this tool, it is recommended that you seek professional advice. Part No. 00-0137.AAA

Read more less

Bridge type - Pilot bearing puller. A very slim line 3 jawed design internal puller for removal of most flywheel pilot bearings. Work travel: 13-38mm. Works well on wheels for remvoing bearings withour damage. Part No. 00-437 (radhouse.co.uk)

Read more less

Part No. 00-423.F (radhouse.co.uk)

Read more less

The Motion Pro Deluxe Suspension Bearing Service Tool is engineered for the efficient removal and precise installation of suspension linkage and swingarm pivot bearings in off-road motorcycles and ATVs. It accommodates 20 mm and 22 mm inner diameter bearings, ensuring compatibility with a wide range of models. Features: Designed for quick and easy removal and precise installation of suspension linkage and swingarm pivot bearings Designed for use on 20 & 22 mm I.D. bearings Fits most off-road motorcycles & ATV’s Includes blind bearing collet for removal of 20 mm blind bearings (other collet sizes available) Anodized aluminium mandrels reduce the possibility of damaging bearing surfaces Laser etched markings for easy size identification Eliminates the need for a shop press Protective blow-molded case for easy storage A must have time saving tool for professional technicians, serious racers and home mechanics Specifications: Included Components: Large driver and 3/4" remover. Material: Heat-treated steel. This tool is essential for motorcycle maintenance, ensuring the safe and efficient removal of wheel bearings without causing damage to the wheel hub.

Read more less

The 25mm Wheel Bearing Remover is designed for the efficient extraction of wheel bearings, utilizing a dependable split collet design for secure engagement. Constructed from heat-treated, high-carbon steel, it ensures durability and a long service life. The tool features a black oxide finish for corrosion resistance. Features: Split collet design for secure bearing engagement. Heat-treated high-carbon steel construction for durability. Black oxide finish for corrosion resistance. Specifications: Size: 25mm. Cross Reference Numbers: 08-0267

Read more less

The 20mm Wheel Bearing Remover is designed for the efficient extraction of wheel bearings, utilizing a dependable split collet design for secure engagement. Constructed from heat-treated, high-carbon steel, it ensures durability and a long service life. The tool features a black oxide finish for corrosion resistance. Features: Split collet design for secure bearing engagement. Heat-treated high-carbon steel construction for durability. Black oxide finish for corrosion resistance. Specifications: Size: 20mm. Cross Reference Numbers: 08-0266

Read more less

The 17mm Wheel Bearing Remover is designed for the efficient extraction of wheel bearings, utilizing a dependable split collet design for secure engagement. Constructed from heat-treated, high-carbon steel, it ensures durability and a long service life. The tool features a black oxide finish for corrosion resistance. Features: Split collet design for secure bearing engagement. Heat-treated high-carbon steel construction for durability. Black oxide finish for corrosion resistance. Specifications: Size: 17mm. Cross Reference Numbers: 08-0268

Read more less

The 15mm Wheel Bearing Remover is designed for the efficient extraction of wheel bearings, utilizing a dependable split collet design for secure engagement. Constructed from heat-treated, high-carbon steel, it ensures durability and a long service life. The tool features a black oxide finish for corrosion resistance. Features: Split collet design for secure bearing engagement. Heat-treated high-carbon steel construction for durability. Black oxide finish for corrosion resistance. Specifications: Size: 15mm. Cross Reference Numbers: 08-0264

Read more less

The 12mm Wheel Bearing Remover is designed for the efficient extraction of wheel bearings, utilizing a dependable split collet design for secure engagement. Constructed from heat-treated, high-carbon steel, it ensures durability and a long service life. The tool features a black oxide finish for corrosion resistance. Features: Split collet design for secure bearing engagement. Heat-treated high-carbon steel construction for durability. Black oxide finish for corrosion resistance. Specifications: Size: 12mm. Cross Reference Numbers: 08-0263

Read more less

The 10mm Wheel Bearing Remover is designed for the efficient extraction of wheel bearings, utilizing a dependable split collet design for secure engagement. Constructed from heat-treated, high-carbon steel, it ensures durability and a long service life. The tool features a black oxide finish for corrosion resistance. Features: Split collet design for secure bearing engagement. Heat-treated high-carbon steel construction for durability. Black oxide finish for corrosion resistance. Specifications: Size: 10mm. Cross Reference Numbers: 08-0262

Read more less

SEAL MATE FORK CLEANER TOOL BLUE

Read more less

These push pin pliers are designed to quickly and cleanly remove plastic push pins from body panels on UTVs, motorcycles, ATVs, cars, and trucks. The compact form factor suits tight spaces, while the lightweight aluminium construction and raised-handle logos provide control and grip. For use on plastic push pins only. Features Removes plastic push pins from UTV, motorcycle, ATV, car, and truck body panels Compatible with push pins 20 mm diameter and smaller Durable, lightweight aluminium construction Raised logo on handles for extra grip Small tool size for tight spaces For use on plastic push pins only Specifications Maximum pin diameter: 20 mm Dimensions (L x W x H): 152 mm x 75 mm x 19 mm Material: Aluminium Cross Reference Numbers 08-0766

Read more less

The Motion Pro CR Seal Bearing Retainer Tool (part number 08-0290) is designed to simplify the removal and replacement of rear wheel bearing/seal retainer rings, including those used on specific KTM and Honda models. This versatile tool allows easy handling of the bearing and seal retainer, as well as the fork cap, ensuring efficient and damage-free maintenance. The tool is compatible with KTM accessory fork cap part number 48600074S, and its design also makes it a replacement for the OEM Honda tool (part number 41231-430-000). Featuring a 22 mm hex and a 3/8" square drive, the tool is equipped to handle a variety of tasks, including removing peened stakes that secure the retainer ring. Its slotted design also accommodates the removal of caps with the 11-0081 Micro Bleeders. Features: Versatile tool with a 22 mm hex and 3/8" square drive Designed to replace OEM Honda tool (41231-430-000) for rear wheel bearing/seal retainer rings Allows removal and replacement of KTM accessory fork cap (48600074S) Slotted for use with the 11-0081 Micro Bleeders Precision engineering prevents damage to the retainer ring Specifications: Material: High-quality, durable construction for professional use Compatibility: Honda CR series and KTM models (details below) Drive: 3/8" square, 22 mm hex Compatible Models: Honda CR250R (1978-1983) Honda CR450R (1981) Honda CR480R (1982) KTM models (2001-2016) including 125 SX, 200 SX, 250 SX, 250 SX-F, 350 EXC-F, 500 EXC, and more

Read more less

The Motion Pro 47mm CR Seal and Bearing Retainer Tool is a precision tool designed to simplify the removal and installation of wheel seal/bearing retainer rings without causing damage to either the retainers or the expensive wheel hub. This tool replaces OEM tools 07HMA-KS70100 and 07YMA-KZ40100, offering a more efficient and cost-effective solution. It features a versatile design with a 22mm hex and 3/8-inch square drive, providing a secure fit for use in various applications. Features: Designed to remove and replace rear wheel bearing/seal retainer rings. 22mm hex and 3/8-inch square drive for secure usage. Helps avoid damage to the retainer or hub during servicing. Ideal for both professional and DIY mechanics. Specifications: Tool size: 47mm Drive: 3/8-inch square Hex size: 22mm Cross-Reference OEM Part Numbers: 07HMA-KS70100 07YMA-KZ40100 Vehicle Fitments/Compatibility: Honda CR125R 1987–1988, 2000–2007 Honda CR250R 1987–1988, 2000–2007 Honda CRF450R 2002–2006 Honda CRF450X 2005–2006 Honda CR500R 1987–1988 Cross reference Numbers: 08-0256

Read more less

MAINSHAFT BEARING RACE TOOL FOR HARLEY DAVIDSON K&L 35-5182 Use to remove and install the bearing inner race on the transmission mainshaft. Use on Big Twin Late 1984-present and Twin Cam 88 A and B. Part No. 00-1912.KL (radhouse.co.uk) Cross reference numbers ONLY.

Read more less

TRANSMISSION COVER BEARING REMOVER AND INSTALLER TOOL FOR HD HARLEYS K&L 35-5198 This tool will remove and replace the transmission door bearings. It can also be used to remove the transmission door for replacement without removing the complete transmission assembly. Door bearings must be replaced if using this tool to pull door off case. Part No. 00-1910.KL (radhouse.co.uk) Cross reference numbers ONLY. NCT5620, JIMS 1078

Read more less

CAM BEARING REMOVER TOOL FOR HD HARLEY K&L 35-5122 Once the camshafts are removed from the support plate, this tool will remove the bearing from the camshaft. Unlike a general purpose puller, this tool was designed to remove the bearing straight, with no slipping or binding. All Twin Cam. Part No. 00-1909.KL (radhouse.co.uk) Cross Reference Numbers Only:JIMS 1280

Read more less

INNER CAM BEARING REMOVER TOOL FOR HARLEY DAVIDSON 35-5310 Designed like our popular single cam bearing tool, it easily removes cam bearings without damaging the crankcase. This tool also keeps the pin rollers from falling into the crankcase. All Twin Cam. Part No. 00-1908.KL (radhouse.co.uk)

Read more less

The Motion Pro Steering Stem Bearing Tool is specifically designed for easy installation and removal of steering stem bearings, particularly on heavy-duty motorcycle and ATV applications. Features: Precision-engineered for smooth and easy bearing installation and removal. Ideal for heavy-duty motorcycles and ATVs with large steering stems. High-quality construction ensures durability and longevity. Provides accurate, efficient bearing handling without damaging surrounding parts. Specifications: Designed for heavy-duty applications. Material: High-strength steel for durability. Compatibility: Suitable for large steering stem bearings on motorcycles and ATVs. Cross Reference Numbers: 08-0558

Read more less

Part No. 00-186 (radhouse.co.uk)

Read more less

SPRING HOOK TOOL [FIR] - An all purpose tool. - Heavy duty all-metal t desig. - The spring steel wire hook will remove exhaust pipe springs, tank or seat holding springs, cotter pins and many other hard to access parts. - Tip is manufactured from Spring steel that is hardened. - FIR products are a high quality replacement part and - Best value for money. - Please check the image before ordering to avoid mistakes. - Easy to install but if unsure please use a professional   Part No. 00-155.EA  FIR [FACTORY IMAGE RACING] (radhouse.co.uk) S/SEED FROM 00-153.EACH TO 00-155.EACH

Read more less

An all purpose hand tool. The spring steel wire hook is very strong made to last. Soft hight grip T handle. Angled hook design makes for easy removal and installation of exhaust or brake springs. Removing tight springs is made easy and safe. Works on exhaust pipe springs, Stand return springs tank or seat holding springs, cotter pins and many other hard to access parts. Material: Steel, Rubber Handle Finish Blacke Plated. Size. 160mm long with 80mm handle. FIR products are a high quality Tools, Accessories and Part and Part No. 00-1532.FIR FIR-BRAND [Factory Image Racing] (radhouse.co.uk)

Read more less