Factory Image Racing

This Factory Image Racing flywheel puller is a service tool for removing compatible flywheels or rotors during engine maintenance. It screws into the flywheel’s threaded centre so that removal force can be applied to the assembly. Features Clean and inspect the flywheel threads before fitting the puller. Screw the puller fully into the flywheel before applying removal force. Copper grease may be applied to the puller threads. Specifications Puller thread: M30 × 1.50, right-hand, male Material: high-carbon steel Treatment: heat-treated Finish: hot black oxide Cross-Reference OEM Part Numbers 5247 - Buzzetti Manufacturer - Flywheel puller PA-46075 - Polaris OEM - Flywheel puller - Alternative Part MP-12340 - Flywheel puller Vehicle Fitments ATK 250 LQ (1999) 500 DT Dirtrackers (2000–2002) 600 DT Dirtrackers (2000–2002) 500 Super Motard (2002) 600 Super Motard (2002) MBK CLUB 2T 50cc (1991–2003) DAKOTA 2T 50cc (2004–2008) EVASION 2T 50cc (1988–1999) HARD ROCK 2T 50cc (1991–2002) KANSAS 2T 50cc (2004–2008) MAGNUM 2T 50cc (1988–1993) MAGNUM RACING 2T 50cc (1989–1995) MAGNUM RACING XR 2T 50cc (1996–2003) PASSION 2T 50cc (1988–1999) PHENIX 2T 50cc (2004–2008) ROCK RACING 2T 50cc (1989–1995) SWING 2T 50cc (1988–1999) POLARIS Outlaw 500 (2003–2007) YAMAHA WR450F (2004–2006) YZ450F (2004–2007)

Read more less

This tire changer bead clamp is designed to assist with mounting and demounting tires by pushing the tire bead into the drop center of the rim. Made from durable composite plastic, the tool features a spring-loaded plunger that holds it in place during use, making it suitable for low-profile sidewalls and a wide range of rim types. Its user-friendly, compact design allows for easy manual adjustment without the need for additional tools. No longer need a buddy to help you fit the tyre! Features Spring-loaded plunger keeps the tool in place during operation Aids in pushing the bead into the drop center of the wheel Suitable for use with most rims Easy to operate with minimal manual effort Designed for mounting and demounting tires, especially low-profile sidewalls Made from composite plastic that is durable and wheel-safe Black color finish Specifications Material: Composite Plastic Color: Black Approximate Size: 16.00cm x 11.00cm x 5.00cm Product Height: Approx. 6.00cm

Read more less

The Bead holding tool is a steel auxiliary tool designed to assist with motorcycle tire installation and removal. It helps manage the tire bead by holding it in the drop center of the rim, making the use of tire levers more effective. The tool is engineered to slip over a spoke, providing control over the bead opposite the working area. Sold individually, but optimal performance is achieved when used in pairs. Constructed from steel plate with a MIG-welded structure and a silver BPZ finish for durability. No longer need a buddy to help change a tyre! Features Assists with motorcycle tire installation and inner tube replacement Holds tire bead in the drop center for efficient lever use Slips over a spoke to secure bead on the opposite side of tire levers Facilitates easier removal of tires from rims Best used in pairs (sold individually) Constructed from steel plate with MIG welds Finished in silver BPZ coating for durability FIR product designed as a high-quality replacement tool Specifications Material: Steel Finish: Silver BPZ Construction: MIG welded Quantity: Sold individually Vehicle Fitments Universal fit for motorcycle wheels with spokes

Read more less

Sizes: T7 T8 T9 T10 T15 T20 T25 T27 T30 T40 Package Includes: 10 x T-Handle TORX Tools 1 x Metal Rack with mounting points

Read more less

FLYWHEEL PULLER 26mm x 1.25 /27mm x 1.50. Right Hand Cross reference numbers. Buzzetti 5288 Tips on use. - Make sure the flywheel thread is clean of dirt and not damaged before screwing the puller in. - Use copper grease on the puller threads, for long life. - Make sure the puller is fully screwed into the flywheel. - After tightening use a hammer on the centre and tap to jolt free [not always need]. - If using old flywheel pullers make sure the threads are in good condition before use to avoid damage to flywheel.

Read more less

Flywheel Puller M26 x 1.50mm RH Thread External Description: Compatible with KTM ENDURO / OFFROAD / MX TWO-STROKE 125/250/300/360CC KTM MOTOPLAT. Cross reference numbers: MP12 WPS 62-2002 MX-12928 Fits most: Husaberg: 4 stroke 400cc, 501cc, and 600cc off-road models. Husqvarna: Late 2 stroke models with CDI ignitions. KTM: 125cc, 250cc, 300cc, 360cc, 495cc XC and MX 2 stroke. ATK Rotax models. Classic: Bultaco, Ossa, Montesa, KTM, Husqvarna, Sachs, Puch, Zundap, Cannondale 440 speed models. Compatible models: 1996-1999 Husaberg FC400 1994-2000 Husaberg FC501 1993-1996 Husaberg FC600 1998-2000 Husaberg FC600 1996-2000 Husaberg FE400 1996-2003 Husaberg FE400E 1989-2000 Husaberg FE501 1996-2003 Husaberg FE501E 1993-1996 Husaberg FE600 2000 Husaberg FE600 1996-2000 Husaberg FE600E 2003 Husaberg FS400E 1998-1999 Husaberg FS600E Tips on use: Ensure the flywheel thread is clean of dirt and not damaged before screwing the puller in. Use copper grease on the puller threads for long life. Make sure the puller is fully screwed into the flywheel. After tightening, use a hammer on the center and tap to jolt free (not always needed). If using old flywheel pullers, make sure the threads are in good condition before use to avoid damage to the flywheel.

Read more less

M27x1.25 R/H FLYWHEEL PULLER 27mm Description: Fits Motoplat small internal rotor MX & ENDURO. Suitable for HUSQVARNA (FEMSA - BOSCH - MOTOPLAT) Most 1960-1970 2 Stroke Models w/C.D.I. Ignition. Compatible with KTM (FEMSA / BOSCH / MOTOPLAT) Most 125cc, 250cc 300cc, 360cc, 495cc XC & MX 2 Stroke Models, and most BULTACO, OSSA, MONTESA, PENTON, SACHS & MAICO [MP3]. Fits most: Husqvarna: 1970-80 2 stroke models with CDI ignitions. KTM: Current 2 stroke liquid cooled models. Classic: Ignition points with condensers or CDI Ignition Systems - Bultaco, Ossa, Montesa, Husqvarna, Penton, Sachs, and Maico. Tips on use: Make sure the flywheel thread is clean of dirt and not damaged before screwing the puller in. Use copper grease on the puller threads for long life. Ensure the puller is fully screwed into the flywheel. After tightening, use a hammer on the center and tap to jolt free (not always needed). If using old flywheel pullers, make sure the threads are in good condition before use to avoid damage to the flywheel.

Read more less

Left-hand M27 × 1.00 thread flywheel/rotor puller designed for precise removal of magneto flywheels and rotors on a wide range of motorcycles. Manufactured from high-carbon steel with heat treatment and a corrosion-resistant black oxide finish, the tool uses a 17 mm drive and compact body for controlled application in confined spaces. Features Purpose-built for removing flywheels or rotors on compatible motorcycles Left-hand external thread configuration for correct engagement with applicable flywheels 17 mm drive head for positive engagement with standard tools Use guidance: ensure flywheel threads are clean, apply copper grease to the puller threads, and screw the puller fully home before applying pressure Specifications Material: High-carbon steel (S45C) Heat treatment: Yes Finish: Black oxide Thread: M27 × 1.00 LH (left-hand) Bolt head size: 17 mm Overall puller length: 67 mm Body length: 42 mm Cross-Reference OEM Part Numbers BUZZETTI 5250 MOTION PRO 08-0026 MOTION PRO 35-5931 MOTION PRO MP1 YM-01189 07933-0010000 57001-252 54629009044 09930-30113 Vehicle Fitments Honda CRF50F (2004–2011) Honda XR50R (2000–2003) Honda CRF70F (2004–2011) Honda CR80/CR85 (1983–2008) Honda CRF80F (2004–2011) Honda XR80 (1979–2003) Honda CRF100F (2004–2012) Honda XR100/R (1981–2003) Honda CR250R (1984–2007) Honda CR450R (1981) Honda CR500 (1984–2001) Kawasaki KDX50 (2003–2006) Kawasaki KX60 (1983–2003) Kawasaki KX65 (2000–2012) Kawasaki KDX80 (1980–1988) Kawasaki KX80/85/100 (1998–2012) Kawasaki KX125 (1993–2005) Kawasaki KDX200 (1997–2006) Kawasaki KDX220 (1997–2005) Kawasaki KDX250 (1991–1994) Kawasaki KX250 (1992–2007) Kawasaki KX500 (1984–2004) KTM 65 SX (1999–2012) KTM 65 XC (2008) KTM 85 SX (2004–2010) KTM 85 XC (2008) KTM 105 XC (2008–2012) KTM 125 EXC (1998–2002) KTM 125 SX (1998–2011) KTM 144 SX (2008) KTM 150 SX (2009–2010) KTM 150 XC (2010–2011) KTM 200 EXC (1998–2005) KTM 200 MXC (1998–2002) KTM 200 XC (2006–2009) KTM 200 XC-W (2006–2012) KTM 250 EXC (2000–2005) KTM 250 MXC (2000–2002) KTM 250 SX (2000–2012) KTM 250 XC (2006–2007) KTM 300 EXC/MXC (1998–2005) KTM 300 XC/XC-W (2006–2007) KTM 380 EXC/MXC/SX (1998–2001) Suzuki RM60 (2003) Suzuki RM65 (2003–2005) Suzuki DR100 (1983–1990) Suzuki RM100 (2003) Suzuki DR125 (1982–1988) Suzuki DR-Z125/L (2003–2009) Suzuki RM125 (1996–2008) Suzuki DR200 (1986–1988) Suzuki RM250 (1989–2008) Suzuki RMX250 (1989–1998) Yamaha DT50 (1976–1988) Yamaha IT125 (1980–1982) Yamaha IT200 (1984–1985) Yamaha TT250 (1980–1982) Yamaha TT500 (1976–1981) Yamaha TT-R125 (2000–2012) Yamaha TT-R250 (2000–2001) Yamaha PW50 (1981–2003) Yamaha PW80 (1983–2003) Yamaha RT100 (1990–1999) Yamaha RT180 (1990–1995) Yamaha WR250Z (1992–2003) Yamaha WR500Z (1992–1993) Yamaha YZ125 (1976–2008) Yamaha YZ250 (1976–2008) Yamaha YZ400F (1998–1999) Yamaha YZ426F (2000–2001) Yamaha YZ465 (1980–1981) Yamaha YZ490 (1983–1990)

Read more less

M27x1.00 Fly wheel PULLER RIGHT HAND THREAD GAS GAS / HONDA DERBI Senda 50 Minarelli Am6 50   Minarelli engines with Yamaha ignition systems. Also suitable for CPI, Keeway and Chinese Minarelli derived 2-stroke engines. Honda CT70 SL70 Z50 C100 C102 C105. Used for removal of the flywheel or rotor if applicable. Premium quality high carbon steel Heat treated for strength and durability Durable hot black oxide finish. FIR Racing products are a high quality replacement part and Best value for money Please check the image before ordering to avoid mistakes.  Part No. 00-097.DR  [FACTORY IMAGE RACING] (radhouse.co.uk) Tips on use. - Make sure the flywheel thread is clean of dirt and not damaged before screwing the puller in. - Use copper grease on the puller threads, for long life. - Make sure the puller is fully screwed into the flywheel. - After tightening use a hammer on the centre and tap to jolt free [not always need]. - If using old flywheel pullers make sure the threads are in good condition before use to avoid damage to flywheel. Cross Reference Numbers Only: MX-12280-1, 08-0026, 2007 Honda CR125R 2006 Honda CR125R 2005 Honda CR125R 2004 Honda CR125R 2003 Honda CR125R 2002 Honda CR125R 2001 Honda CR125R 2000 Honda CR125R 1999 Honda CR125R 1998 Honda CR125R 1997 Honda CR125R 1996 Honda CR125R 1995 Honda CR125R 1994 Honda CR125R 1993 Honda CR125R 1992 Honda CR125R 1991 Honda CR125R 1990 Honda CR125R 1989 Honda CR125R Suzuki RM 60 2003 Suzuki RM 65 2003-2005 Suzuki DS 80 1978-2000 Suzuki LT 80 1987-2006 Suzuki DR 100 1983-1990 Suzuki RM 100 2003 Suzuki DR 125 1982-1988 Suzuki DRZ 125 2003-2009 Suzuki DRZ 125 2012-2013 Suzuki DRZ 125 (CAN) 2010 Suzuki DRZ 125L 2003-2009 Suzuki DRZ 125L 2012-2013 Suzuki DRZ 125L (CAN) 2010 Suzuki LT 125 1983-1987 Suzuki LT 125 Suzuki RM 125 1996-2007 Suzuki RM 125 2008 (Non-USA model) Suzuki LT 160E 1989 Suzuki ALT 185 1985 Suzuki DR 200 1986-1988 Suzuki LT 250R 1985-1990 Suzuki RM 250 1989-2008 Suzuki RMX 250 1989-1998 Yamaha YZ 250 2000-2018 Yamaha YZ 250F 2001-2002 Yamaha YZ 250F 2004-2013 Yamaha RZ 350 1984-1985 Yamaha XT 350 1985-2000 Yamaha YFZ 350 1987-2006 Yamaha YZ 400F, 1998 to 1999 Yamaha YZ 426F 2000-2002 Yamaha YZ 450F 2003-2005 Yamaha SR 500 1978-1981 Yamaha TT 500 1976-1981 Yamaha XT 500 1976-1981

Read more less

Flywheel Puller 20mm x 1.5-RH-External Thread, Hollow Equivalent to Honda tool 07933-3950000. Used for removal of the flywheel or rotor if applicable. Premium quality high carbon steel. Heat treated for strength and durability. Durable hot black oxide finish. Application Bellow. Hollow center to puller. Part No. 00-094.FIR  [FACTORY IMAGE RACING] (radhouse.co.uk) Cross reference numbers ONLY. REPLACES 00-094.DR, Honda tool 07933-3000000 Tips on use. - Make sure the flywheel thread is clean of dirt and not damaged before screwing the puller in. - Use copper grease on the puller threads, for long life. - Make sure the puller is fully screwed into the flywheel. - After tightening use a hammer on the centre and tap to jolt free [not always need]. - If using old flywheel pullers make sure the threads are in good condition before use to avoid damage to flywheel. Flywheel puller for 1976 Honda MR250 Elsinore, 1978-1979 Honda CB400A/T, CB450SC, CM450, CMX450C, CX500, CX650, GL500, GL650, MR250, NX250, PC800, 1981 Honda GL500I Silver Wing Interstate, 1981 Honda GL500 Silver Wing, 1982 Honda GL500I Silver Wing Interstate, 1982 Honda GL500D Silver Wing Deluxe UK Models, 1982 Honda GL500 Silver Wing, 1983 Honda VT750C Shadow, 1983 Honda GL650I Silverwing Interstate, 1983 Honda GL650 Silverwing, 1983 Honda GL500D Silver Wing Deluxe UK Models, 1984 Honda VT700C Shadow, 1984 Honda TRX250 Fourtrax, 1984 Honda GL650D2 Silverwing Deluxe UK Models, 1985 Honda VT700C Shadow, 1985 Honda VT1100C Shadow, 1985 Honda TRX250 Fourtrax, 1985 Honda GL650D2 Silverwing Deluxe UK Models, 1985 Honda ATC350X, 1985 Honda ATC250SX, 1985 Honda ATC250ES Big Red, 1986 Honda VT700C Shadow, 1986 Honda VT1100C Shadow, 1986 Honda TRX250 Fourtrax, 1986 Honda GL650D2 Silverwing Deluxe UK Models, 1986 Honda ATC350X, 1986 Honda ATC250SX, 1 00-094.KL" Honda ATC250ES Big Red, 1986 Honda VT700C Shadow, 1986 Honda VT1100C Shadow, 1986 Honda TRX250 Fourtrax, 1986 Honda GL650D2 Silverwing Deluxe UK Models, 1986 Honda ATC350X, 1986 Honda ATC250SX, 1986 Honda ATC250ES Big Red, 1987 Honda VT700C Shadow, 1987 Honda VT1100C Shadow, 1987 Honda VF700C Magna, 1987 Honda TRX250X Fourtrax, 1987 Honda TRX250 Fourtrax, 1987 Honda ATC250SX, 1987 Honda ATC250ES Big Red, 1988 Honda VT800C Shadow, 1988 Honda VT1100C Shadow, 1988 Honda VF750C Magn 00-094.MP"  

Read more less

HOSE REMOVER PLIER, 25mm - FUNCTION END 25MM - REMOVAL OF 5/32"(3.9MM) ~ 1/2"(12.7MM) VACUUM AND FUEL HOSES. - INCLUDES WRENCH ENDS 8MM, 10MM - FIR-BRAND products are a high quality. Tools, Accessories and Part all Part No. 00-0910.FIR  [FACTORY IMAGE RACING] (radhouse.co.uk) Cross reference numbers ONLY. UP-12624

Read more less

Used for grinding valves in vehicle engines. Start refacing with coarse paste and change to fine paste to achieve a perfectly smooth finish. VALVE TOOL SET. 35/25 & 18/13. Set of two valve grinders with plastic shafts. Suitable for grinding-in most engine valves. Features four sizes of rubber suction cup. Will work on valve heads 13mm to 35mm. Grinding Paste. ABRO GP-201 Specially formulated for grinding automotive valves. Unique can design opens for easy access to either fine or coarse paste-like grit. 5oz/140g. Part No 00-090.FIR [FACTORY IMAGE RACING] (radhouse.co.uk) Tip, see this vidoe on youtube. https://www.youtube.com/watch?v=Mbz3qAt-MJQ

Read more less

This two-piece hand valve lapping stick set is designed for grinding-in and seating engine valves. Each stick has a plastic grip shaft and double-ended rubber suction cups, providing four cup sizes—35 mm, 25 mm, 18 mm and 13 mm—to cover common valve head diameters from 13 mm to 35 mm. Features Set of two valve grinders with plastic grip shafts Four sizes of rubber suction cup: 35 mm, 25 mm, 18 mm, 13 mm Double-ended sticks for quick size changes Suitable for grinding-in most engine valves Working range covers valve head diameters from 13 mm to 35 mm Specifications Large stick overall length: 225 mm Large stick suction cup diameters: 35 mm and 25 mm Small stick overall length: 205 mm Small stick suction cup diameters: 18 mm and 13 mm Handle material: plastic Suction cup material: rubber

Read more less

Flywheel Puller, M20X1.5 R.H. External Thread [FACTORY IMAGE RACING] Equivalent to Honda tool 07933-3000000, Kawasaki tool 57001-1196, Suzuki tool 09930-30450-LPT. Used for removal of the flywheel or rotor if applicable. Features: Premium quality high carbon steel Heat treated for strength and durability Durable hot black oxide finish Flywheel Puller 20mm X 1.5 Right Hand Internal Male for sale MP9 Right Hand Internal Male Compatible with: Honda: XR200R 84-85, XR250R 84-85, XR250R/600R, XL650R, vintage street 750 4 cylinders, CB750 (1969-1978) all models Kawasaki: KLR250 (1985 later), KLR600A (1984-1986), KLR650A (1987 later), KL650B Tengai, KLR (1990-1991), KLX250 and KLX300. Early model Suzuki: GSXR600V, GSXR750T/V, GSXR1000 motorcycles. 07933-3000000 Note: Some of these motorcycles use a different flywheel within the same model. 1969 Honda CB750K0 Tips on use: Make sure the flywheel thread is clean of dirt and not damaged before screwing the puller in Use copper grease on the puller threads for long life Ensure the puller is fully screwed into the flywheel After tightening, use a hammer on the center and tap to jolt free [not always needed] If using old flywheel pullers, make sure the threads are in good condition before use to avoid damage to the flywheel Cross Reference Numbers Only: PSYCHIC MX-12924 Motion Pro 08-0085 07933-3000000

Read more less

SWING ARM BUSHING PRESS TOOL [FACTORY IMAGE RACING] Used for removal and installing swing arm bearings without damage. No more using your sockets, this tool is perfectly machined to fit and do the job without damaging your swingarm. Specifications: Size: O.D: 16.4/22.7/20.6 x L: 67/34.9/29.5/2.5MM Compatible with HONDA models: 2000-2007 CR125R 2000-2007 CR250R 2002-2006 CRF450R 2005-2006 CRF450X 1987-1988 CR500R Cross Reference Numbers Only: H-DI-001 FIR-BRAND products are of high quality. Tools, Accessories, and Parts all

Read more less

M35 / 35mm x1.50 flywheel extractor puller with internal thread. 35mm x 1.5mm RH Female 4-stroke single cylinder models with large flywheels. Most 4 wheel ATV This product is made of high-quality materials to serve you for years to come. Designed using state-of-the-art technology and with customers in mind. It will meet your needs and deliver great quality at an affordable cost. - FIR products are a high quality replacement part and KAWASAKI KLT160, KLF185 Bayou, KLF220 Bayou, KLF250 Bayou KLF300 Bayou. Rotax. 600cc with large flywheel. Husqvarna/Cagiva : All models with ignition point systems, 1978 and later, large flywheel motoplat ignitions C.D.I. Bultaco : Femsa magneto, most late 1960’s – 1970’s, Pursang Mx, El Tigre, Frontera, Bandito, Matador, Metrella, Sherpa series S125 and 200Mx, Sherpa “T” Others : Ossa Mx, Montesa Mx, Zundap, Sachs, Pento and Puch, Many European Mo-Peds and Scooters. Tips on use. - Make sure the flywheel thread is clean of dirt and not damaged before screwing the puller in. - Use copper grease on the puller threads, for long life. - Make sure the puller is fully screwed into the flywheel. - After tightening use a hammer on the centre and tap to jolt free [not always need]. - If using old flywheel pullers make sure the threads are in good condition before use to avoid damage to flywheel. Part No 00-080.DR   FIR [FACTORY IMAGE RACING] (radhouse.co.uk) Cross Reference Numbers Only:215-03, K&L 35-5941, MP5,  150640,  A-2404, BRONCO AT-12673, MP5, Kawasaki KLF185 Bayou1988 Kawasaki KLF185 Bayou1987 Kawasaki KLF185 Bayou1986 Kawasaki KLF185 Bayou1985 Kawasaki KLF185 BayouKawasaki KLF250 Bayou2010 Kawasaki KLF250 Bayou2009 Kawasaki KLF250 Bayou2008 Kawasaki KLF250 Bayou2007 Kawasaki KLF250 Bayou2006 Kawasaki KLF250 Bayou2005 Kawasaki KLF250 Bayou2004 Kawasaki KLF250 Bayou2003 Kawasaki KLF250 BayouKawasaki KLF300 Bayou 2x42004 Kawasaki KLF300 Bayou 2x42003 Kawasaki KLF300 Bayou 2x42002 Kawasaki KLF300 Bayou 2x42001 Kawasaki KLF300 Bayou 2x42000 Kawasaki KLF300 Bayou 2x41999 Kawasaki KLF300 Bayou 2x41998 Kawasaki KLF300 Bayou 2x41997 Kawasaki KLF300 Bayou 2x41996 Kawasaki KLF300 Bayou 2x41995 Kawasaki KLF300 Bayou 2x41994 Kawasaki KLF300 Bayou 2x41993 Kawasaki KLF300 Bayou 2x41992 Kawasaki KLF300 Bayou 2x41991 Kawasaki KLF300 Bayou 2x41990 Kawasaki KLF300 Bayou 2x41989 Kawasaki KLF300 Bayou 2x41988 Kawasaki KLF300 Bayou 2x41987 Kawasaki KLF300 Bayou 2x41986 Kawasaki KLF300 Bayou 2x4Kawasaki KLF300 Bayou 4x42004 Kawasaki KLF300 Bayou 4x42003 Kawasaki KLF300 Bayou 4x42002 Kawasaki KLF300 Bayou 4x42001 Kawasaki KLF300 Bayou 4x42000 Kawasaki KLF300 Bayou 4x41999 Kawasaki KLF300 Bayou 4x41998 Kawasaki KLF300 Bayou 4x41997 Kawasaki KLF300 Bayou 4x41996 Kawasaki KLF300 Bayou 4x41995 Kawasaki KLF300 Bayou 4x41994 Kawasaki KLF300 Bayou 4x41993 Kawasaki KLF300 Bayou 4x41992 Kawasaki KLF300 Bayou 4x41991 Kawasaki KLF300 Bayou 4x41990 Kawasaki KLF300 Bayou 4x41989 Kawasaki KLF300 Bayou 4x4Kawasaki KLT1601985 Kawasaki KLT160 1985-88 KLF185 Bayou 2003-10 KLF250 Bayou 1986-04 KLF300 Bayou 2x41989-04 KLF300 Bayou 4x4 ALL KSF250 Mojave KAWASAKI 4 STROKES, MX SUZUKI 1990-99 DR350 1990-93 DR350S ATV LT MODELS, Applications :

Read more less

1x Gauge 2x Needles

Read more less

The Needles Only Pack includes five nitrogen needles intended for use with airbag filling joint tools when charging nitrogen in compatible shock absorber systems on powersport vehicles, supporting routine suspension servicing and maintenance tasks. Features Pack of 5 nitrogen needles for airbag filling joint tools Suitable for nitrogen charging during shock absorber servicing Supports maintenance and servicing of suspension components requiring nitrogen filling Visual confirmation recommended before ordering Easy to install; professional assistance recommended if unsure Specifications Quantity: 5 needles Brand: Factory Image Racing (FIR)

Read more less

Nitrogen needle kit for shock absorber airbag filling joints, designed for nitrogen needle-type shock absorber filling heads and tools. It is suitable for use with Schmidty Racing Suspensions and is compatible with a range of brands and vehicles including Honda, KTM, Yamaha, Polaris RZR, Arctic Cat and Ford Raptor trucks. It may also be used for snowmobiles and other vehicles. Features Designed for nitrogen application in shock absorber airbag filling joints Uses self-sealing rubber plugs or balls for secure nitrogen application Fitted with a Schrader valve for installation on zero-loss chucks or any Schrader-style chuck Provides an alternative to traditional nitrogen needles Suitable for use with Schmidty Racing Suspensions tools Can be used on snowmobiles, Raptor trucks and other vehicles Specifications Type: Nitrogen needle kit Package includes: 1 set of nitrogen needle Vehicle Fitments Universal fit for shock absorbers on KTM, Yamaha, Honda, Polaris RZR, Arctic Cat, FOX, Ohlins, Ford Raptor trucks, Fox UTVs and snowmobiles Compatibility may extend to other vehicle models beyond those listed

Read more less