Oils & Lubricants

Liqui Moly Motorbike 4T Synth 10W-40 Street Race is a fully synthetic high-performance engine oil developed for air- and water-cooled 4-stroke motorcycle engines operating under normal to extreme conditions. It ensures optimal lubrication, outstanding engine cleanliness, excellent friction characteristics, and minimal wear. This oil is suitable for engines with or without wet clutches and has been tested for use with catalytic converters. Product Features: SAE 10W-40 viscosity grade Meets API SN PLUS and JASO MA2 specifications Fully synthetic formulation for optimal lubrication High shear stability and resistance to aging Ensures outstanding engine cleanliness and minimal wear Suitable for use with catalytic converters Designed for smooth clutch engagement and gear shifting Low oil consumption Technical Specifications: Density at 15°C: 0.842g/cm³ Viscosity at 40°C: 86.0mm²/s Viscosity at 100°C: 13.56mm²/s Viscosity index: 160 Pour point: -36°C Flash point: 228°C Evaporation loss (Noack): 11.0% Total base number: 7.0mg KOH/g Sulfate ash: 0.8g/100g Application Information: This oil is developed for air- and water-cooled 4-stroke engines exposed to normal to extreme operating conditions and is suitable for sporting applications. For optimal effectiveness, use this product unmixed and follow the engine manufacturer's operating instructions.

Read more less

Liqui Moly Motorbike 4T 5W-40 HC Street is a high-performance engine oil formulated with synthetic technology, designed for air- and water-cooled 4-stroke motorcycle engines operating under normal to extreme conditions. It ensures optimal lubrication, outstanding engine cleanliness, excellent friction characteristics, and minimal wear. This oil is suitable for engines with or without wet clutches and has been tested for use with catalytic converters. Product Features: SAE 5W-40 viscosity grade Meets API SN PLUS and JASO MA2 specifications High shear stability and wear resistance Excellent engine cleanliness and low oil consumption Optimal ageing stability Suitable for engines with or without wet clutches Tested for use with catalytic converters Technical Specifications: Density at 15°C: 0.850g/cm³ Viscosity at 40°C: 85.0mm²/s Viscosity at 100°C: 14.3mm²/s Viscosity index: 175 Pour point: -36°C Flash point: 228°C Evaporation loss (Noack): 11.0% Total base number: 7.0mg KOH/g Sulfate ash: 0.8g/100g Application Information: This oil is developed for air- and water-cooled 4-stroke engines exposed to normal to extreme operating conditions and is suitable for sporting applications. For optimal effectiveness, use this product unmixed and follow the engine manufacturer's operating instructions.

Read more less

Liqui Moly Motorbike 4T 5W-40 HC Street is a high-performance engine oil formulated with synthetic technology, designed for air- and water-cooled 4-stroke motorcycle engines operating under normal to extreme conditions. It ensures optimal lubrication, outstanding engine cleanliness, excellent friction characteristics, and minimal wear. This oil is suitable for engines with or without wet clutches and has been tested for use with catalytic converters. Product Features: SAE 5W-40 viscosity grade Meets API SN PLUS and JASO MA2 specifications High shear stability and wear resistance Excellent engine cleanliness and low oil consumption Optimal ageing stability Suitable for engines with or without wet clutches Tested for use with catalytic converters Technical Specifications: Density at 15°C: 0.850g/cm³ Viscosity at 40°C: 85.0mm²/s Viscosity at 100°C: 14.3mm²/s Viscosity index: 175 Pour point: -36°C Flash point: 228°C Evaporation loss (Noack): 11.0% Total base number: 7.0?mg KOH/g Sulfate ash: 0.8g/100g Application Information: This oil is developed for air- and water-cooled 4-stroke engines exposed to normal to extreme operating conditions and is suitable for sporting applications. For optimal effectiveness, use this product unmixed and follow the engine manufacturer's operating instructions.

Read more less

Liqui Moly ATV 4T Motoroil 5W-50 is a fully synthetic high-performance engine oil formulated for air- and water-cooled 4-stroke engines operating under extreme off-road conditions. It ensures rapid oil delivery at low temperatures and excellent wear protection at high temperatures, maintaining optimal engine performance across a wide range of operating conditions. This oil is suitable for ATVs and Side x Sides with or without wet clutches. Product Features: SAE 5W-50 viscosity grade Meets API SN PLUS and JASO MA2 specifications Fully synthetic formulation for optimal lubrication High shear stability and resistance to aging Ensures outstanding engine cleanliness and minimal wear Suitable for use with catalytic converters Designed for smooth clutch engagement and gear shifting Rapid oil delivery at low temperatures Technical Specifications: Density at 15°C: 0.850g/cm³ Viscosity at 40°C: 105.0mm²/s Viscosity at 100°C: 17.3mm²/s Viscosity index: 172 Pour point: -39°C Flash point: 230°C Evaporation loss (Noack): 4.5% This oil is tested on engines with catalytic converters and racing machines, ensuring its reliability and performance in demanding conditions. Note: For optimal effectiveness, use this product unmixed and follow the engine manufacturer's operating instructions.

Read more less

Liqui Moly Motorbike 4T 20W-50 Street is a high-performance mineral-based engine oil formulated for air- and water-cooled 4-stroke motorcycle engines operating under normal to demanding conditions. It is suitable for engines with or without wet clutches and is ideal for both standard and sporty applications. This oil ensures optimal lubrication, excellent engine cleanliness, and minimal wear under all operating conditions. It has been tested for use with catalytic converters. Product Features: SAE 20W-50 viscosity grade Meets API SN and JASO MA2 specifications High lubricant-film stability and excellent wear protection High shear and ageing stability Outstanding cleaning and dispersion properties Prevents black sludge formation Low evaporation loss and oil consumption Mixable with all commercially available engine oils Suitable for wet clutches Tested for compatibility with catalytic converters Technical Specifications: Density at 15°C: 0.870g/cm³ Viscosity at 40°C: 140.0mm²/s Viscosity at 100°C: 18.3mm²/s Viscosity index: 145 Pour point: -30°C Flash point: 230°C Evaporation loss (Noack): 10.6% Total base number: 7.0mg KOH/g Sulfate ash: 0.8g/100g Note: For optimal effectiveness, use this product unmixed and follow the engine manufacturer's operating instructions.

Read more less

Liqui Moly Motorbike 4T 15W-50 Street is a high-performance engine oil formulated using synthetic technology, designed for year-round use in air- and water-cooled 4-stroke motorcycle engines. It is suitable for engines with or without wet clutches and is ideal for both standard and sporty applications. This oil ensures optimal lubrication, excellent engine cleanliness, and minimal wear under all operating conditions. It has been tested for use with catalytic converters. Features: SAE 15W-50 viscosity grade Meets API SN PLUS and JASO MA2 specifications High wear resistance and excellent shear stability Optimal ageing stability Suitable for engines with or without wet clutches Ensures low oil consumption Tested for use with catalytic converters Technical Specifications: Density at 15°C: 0.870g/cm³ Viscosity at 40°C: 140.0mm²/s Viscosity at 100°C: 18.3mm²/s Viscosity index: 160 Pour point: -33°C Flash point: 230°C Evaporation loss (Noack): 4.5% Total base number: 7.0mg KOH/g Sulfate ash: 0.8g/100g Note: For optimal effectiveness, use this product unmixed and follow the engine manufacturer's operating instructions.

Read more less

Liqui Moly Motorbike 4T Synth 10W-60 Street Race is a fully synthetic, high-performance engine oil formulated for air- and water-cooled 4-stroke motorcycle engines operating under normal to extreme conditions. It is particularly suited for sporting applications and is compatible with engines equipped with or without wet clutches. Product Features: SAE 10W-60 viscosity grade Meets API SN PLUS and JASO MA2 specifications Fully synthetic formulation ensures optimal lubrication High shear stability and resistance to aging Excellent engine cleanliness and minimal wear Suitable for use with catalytic converters Designed for smooth clutch engagement and gear shifting Low oil consumption Technical Specifications: Density at 15°C: 0.850g/cm³ Viscosity at 40°C: 176.0mm²/s Viscosity at 100°C: 25.0mm²/s Viscosity index: 175 Pour point: -39°C Flash point: 250°C Evaporation loss (Noack): 4.9% This oil is tested on engines with catalytic converters and racing machines, ensuring its reliability and performance in demanding conditions. Note: For optimal effectiveness, use this product unmixed and follow the engine manufacturer's operating instructions.

Read more less

Liqui Moly Motorbike 4T Synth 10W-50 Street Race is a fully synthetic high-performance engine oil engineered for air- and water-cooled 4-stroke motorcycle engines operating under normal to extreme conditions. It is particularly suited for sporting applications and is compatible with engines equipped with or without wet clutches. Product Features: SAE 10W-50 viscosity grade Meets API SN PLUS and JASO MA2 specifications Fully synthetic formulation ensures optimal lubrication High shear stability and resistance to aging Excellent engine cleanliness and minimal wear Suitable for use with catalytic converters Designed for smooth clutch engagement and gear shifting Low oil consumption Technical Specifications: Density at 15°C: 0.850g/cm³ Viscosity at 40°C: 124mm²/s Viscosity at 100°C: 18.5mm²/s Viscosity index: 165 Pour point: -39°C Flash point: 230°C Evaporation loss (Noack): 4.5% This oil is tested on engines with catalytic converters and racing machines, ensuring its reliability and performance in demanding conditions. Note: For optimal effectiveness, use this product unmixed and follow the engine manufacturer's operating instructions.

Read more less

Liqui Moly Motorbike 4T Synth 5W-40 Street Race is a fully synthetic high-performance engine oil engineered for modern four-stroke motorcycles operating under normal to extreme conditions. It ensures optimal lubrication, excellent shear stability, and superior wear protection, making it suitable for both road and racing applications. Tested on engines with catalytic converters and wet clutches, this oil maintains engine cleanliness and performance over extended service intervals. Product Features: Fully synthetic formulation for maximum performance and protection Excellent shear stability and wear resistance Ensures high engine cleanliness and low oil consumption Suitable for engines with or without wet clutches Tested on engines with catalytic converters Volume: 4 litres Specifications and Approvals: SAE Viscosity Grade: 5W-40 API SN PLUS JASO MA2 Technical Data: Density at 15°C: 0.845g/cm³ Viscosity at 40°C: 84.0mm²/s Viscosity at 100°C: 13.8mm²/s Viscosity Index: 170 Pour Point: -51°C Flash Point: 230°C Total Base Number: 7.0mg KOH/g Sulfated Ash: 0.8g/100g Application Information: Designed for air- and water-cooled four-stroke engines in motorcycles, including those used in racing and road applications Compatible with engines equipped with or without wet clutches Follow the manufacturer's specifications for oil change intervals and procedures Ensure components are clean and free from contaminants before refilling Dispose of used oil responsibly in accordance with local regulations

Read more less

Liqui Moly Motorbike Gear Oil GL4 80W-90 Scooter is a mineral-based, high-performance gear oil formulated for transmissions and final drives in scooters and mopeds operating under normal to high loads. Its carefully selected base oils and multifunctional additives ensure excellent wear protection, thermal stability, and smooth operation across a wide temperature range. This 150ml tube is ideal for applications requiring precise dosing. Product Features: High pressure-absorption capability for reliable performance under load Minimises wear and reduces running noise Excellent viscosity-temperature behaviour and ageing resistance Compatible with common sealing materials Suitable for transmissions and final drives with normal to high loading Volume: 150ml Specifications: SAE Viscosity Grade: 80W-90 API GL4 MIL-L 2105 Technical Data: Density at 15°C: 0.895g/cm³ Viscosity at 40°C: 143mm²/s Viscosity at 100°C: 14.5mm²/s Viscosity Index: 100 Pour Point: -30°C Flash Point: 220°C Application Information: Ensure compatibility with manufacturer specifications before use Follow recommended oil change intervals and procedures Dispose of used oil responsibly in accordance with local regulations

Read more less

Liqui Moly Tyre Fitting Spray is a specialised lubricant developed to ease the installation and removal of all tyre types, including low-profile and run-flat designs. Its excellent slip properties prevent bead damage during mounting and reduce the risk of tyre slippage on the rim. The product applies as a white foam for visibility and dries clear without leaving residue, eliminating the need for additional cleaning. Product Features: Suitable for all tyre types including low-profile and run-flat tyres Optimised lubrication for safe and efficient tyre mounting Prevents bead damage and rim slippage post-installation Applies white and dries clear for visual control Economical and easy to apply with fast drying time Volume: 400ml Application Information: Shake the spray can briefly before use Evenly apply to the tyre bead Mount or demount tyre according to standard procedure No cleaning required after drying as the residue becomes transparent

Read more less

Liqui Moly Motorbike Engine Flush is a cleaning fluid designed to remove deposits and contaminants from the oil circuits of four-stroke motorcycle engines. It dissolves sludge and lacquer formers, suspending both oil-soluble and oil-insoluble residues, which are then removed during the subsequent oil change. This process restores the engine's original performance and ensures the fresh oil can operate under optimal conditions. Product Features: Effectively cleans internal engine components by dissolving sludge and lacquer deposits Suspends contaminants for removal during oil change Compatible with catalytic converters Safe for use with wet clutches Neutral to common sealing materials Simple application process Volume: 250ml Technical Data: Form: Liquid Base: Additive, carrier liquid Viscosity at 40°C: 24.12mm²/s Flash Point: 61°C Pour Point: -45°C Density at 20°C: 0.805?g/cm³ Application Information: Add 250ml to warm engine oil before oil change (sufficient for up to 4.5 litres of oil) Allow the engine to idle for approximately 10 minutes For manual transmissions, operate the clutch lever several times, holding it for a few seconds each time Proceed with oil and filter change Compatible with all commercially available motor oils

Read more less

Liqui Moly Foam Filter Oil is a specialised fluid designed for treating foam air filters in motorcycles and other small engines. Its high adhesive properties ensure that dust, sand, and dirt are effectively trapped, preventing engine wear and maintaining optimal airflow. This oil is suitable for both two-stroke and four-stroke engines equipped with foam air filters. Product Features: High adhesion to trap dust and dirt particles Enhances engine protection and prolongs service life Water-repellent properties to prevent moisture ingress Does not resinify or foam, ensuring consistent performance Blue tint for easy and uniform application Volume: 500ml Application Information: Clean the foam air filter thoroughly and allow it to dry Pour the foam filter oil into a suitable container Immerse the filter in the oil and massage gently to ensure complete saturation Squeeze out excess oil without wringing the filter Allow the filter to air out for 10 to 15 minutes before reinstalling Ensure the application area is well-ventilated during use This product is ideal for maintaining the efficiency and longevity of foam air filters in motorcycles, ensuring consistent engine protection and performance.

Read more less

Liqui Moly Motorbike Fork Oil 5W Light is a fully synthetic suspension fluid engineered for universal application in motorcycle telescopic forks and shock absorbers. Its advanced formulation ensures consistent damping performance, minimises shear losses, and provides excellent wear and corrosion protection, even under demanding riding conditions. This 5-litre volume is ideal for workshops and frequent service applications. Product Features: Fully synthetic formulation for consistent damping behaviour Reduces shear losses and maintains stable viscosity Prevents foam formation and seal hardening High wear resistance and corrosion protection Suitable for telescopic forks and shock absorbers in motorcycles, mopeds, and other two-wheeled vehicles Volume: 5 litres Technical Data: Viscosity at 40°C: 18.0mm²/s Viscosity at 100°C: 4.1mm²/s Viscosity Index: 131 Pour Point: -72°C Flash Point: 220°C Density at 15°C: 0.825g/cm³ Application Information: Follow the manufacturer's specifications for fork oil replacement intervals and procedures Ensure components are clean and free from contaminants before refilling Dispose of used oil responsibly in accordance with local regulations

Read more less

Liqui Moly Motorbike 2T Semisynth Scooter Street is a semi-synthetic two-stroke engine oil formulated for air- and water-cooled engines operating under normal to high loads. It provides optimal lubrication, excellent wear protection, and maintains engine cleanliness. The oil is self-mixing and suitable for both separate and premix lubrication systems, with a recommended mixing ratio of up to 1:50, adhering to manufacturer guidelines. Product Features: Semi-synthetic formulation for enhanced performance Provides excellent wear protection and engine cleanliness Low smoke emissions for cleaner operation Self-mixing; suitable for premix and separate lubrication systems Compatible with air- and water-cooled two-stroke engines Volume: 500ml Specifications: API TC ISO L-EGC JASO FC TISI Application Information: For premix systems: Pour the appropriate amount into the fuel tank, then add petrol to achieve the desired mixing ratio. For separate lubrication systems: Fill the oil tank as specified by the manufacturer. Always follow the engine manufacturer's recommendations for mixing ratios and maintenance intervals.

Read more less

Liqui Moly Motorbike 2T Semisynth Scooter is a semi-synthetic two-stroke engine oil designed for air- and water-cooled scooter engines operating under normal to high loads. It offers reliable lubrication, excellent wear protection, and low smoke emissions, ensuring optimal engine cleanliness and performance. Suitable for both premix and separate lubrication systems, this oil is self-mixing with a recommended mixing ratio of up to 1:50, following manufacturer guidelines. Product Features: Semi-synthetic formulation for enhanced performance Provides excellent wear protection and engine cleanliness Low smoke emissions for cleaner operation Self-mixing; suitable for premix and separate lubrication systems Compatible with air- and water-cooled two-stroke engines Volume: 1 litre Specifications: API TC ISO L-EGC JASO FC TISI (Thailand Industrial Standards Institute) Application Information: For premix systems: Pour the appropriate amount into the fuel tank, then add petrol to achieve the desired mixing ratio. For separate lubrication systems: Fill the oil tank as specified by the manufacturer. Always follow the engine manufacturer's recommendations for mixing ratios and maintenance intervals.

Read more less

Liqui Moly Motorbike 2T Basic Scooter is a mineral-based two-stroke engine oil formulated for air- and water-cooled engines operating under standard conditions. It provides reliable lubrication, reduces wear, and maintains engine cleanliness. The oil is self-mixing and suitable for both separate and premix lubrication systems, with a recommended mixing ratio of up to 1:50, adhering to manufacturer guidelines. Product Features: Mineral oil formulation for consistent performance High wear resistance and corrosion protection Helps maintain clean spark plugs and prevents deposit formation Self-mixing; suitable for separate and premix lubrication systems Compatible with air- and water-cooled two-stroke engines Volume: 1 litre Specifications: API TC ISO L-EGB JASO FB Technical Data: Viscosity at 40°C: 67mm²/s Viscosity at 100°C: 9.1mm²/s Viscosity Index: 111 Pour Point: -15°C Flash Point: 146°C Density at 15°C: 0.865g/cm³ Application Information: For premix systems: Pour the appropriate amount into the fuel tank, then add petrol to achieve the desired mixing ratio. For separate lubrication systems: Fill the oil tank as specified by the manufacturer. Always follow the engine manufacturer's recommendations for mixing ratios and maintenance intervals.

Read more less

Liqui Moly Motorbike 4T 10W-40 Scooter is a high-performance mineral-based engine oil formulated for air- and water-cooled four-stroke scooter engines. It ensures optimal lubrication, wear protection, and engine cleanliness under various operating conditions. Tested for use with catalytic converters, this oil is suitable for both urban commuting and extended rides. Product Features: Mineral oil formulation for consistent performance Ensures optimal lubrication and wear protection Maintains engine cleanliness and reduces deposits Compatible with catalytic converters Suitable for air- and water-cooled four-stroke scooter engines Volume: 1 litre Specifications: SAE Viscosity Grade: 10W-40 API Service Classification: SG, SJ ACEA A3 Technical Data: Viscosity at 40°C: 90.0mm²/s Viscosity at 100°C: 14.0mm²/s Viscosity Index: 159 Pour Point: -39°C Flash Point: 230°C Density at 15°C: 0.865g/cm³ Application Information: Designed for air- and water-cooled four-stroke scooter engines Ensure compatibility with manufacturer specifications before use Follow recommended oil change intervals and procedures Dispose of used oil responsibly in accordance with local regulations

Read more less

Liqui Moly Gear Oil GL4 80W is a high-performance mineral-based transmission fluid formulated for use in manual gearboxes and final drives subjected to normal to high loads. It ensures smooth gear shifting, excellent wear protection, and reliable lubrication across a wide temperature range. Product Features: Mineral oil formulation with carefully selected base oils and additives Facilitates smooth and precise shifting High wear resistance and pressure-absorption capability Excellent viscosity-temperature behaviour and ageing resistance Compatible with common sealing materials Reduces running noise Volume: 500ml Specifications: SAE Class: 80W API GL4 MIL-L 2105 ZF TE-ML 02B, 17A Technical Data: Viscosity at 40°C: 93.4mm²/s Viscosity at 100°C: 11.4mm²/s Viscosity index: 110 Pour point: -27°C Flash point: 218°C Density at 15°C: 0.885g/cm³ Application Information: Suitable for manual, auxiliary, and axle drive transmissions with normal to high loading Follow the manufacturer's specifications for oil change intervals and procedures Ensure components are clean and free from contaminants before refilling

Read more less

Liqui Moly Fork Oil 10W Medium is a fully synthetic suspension fluid engineered for universal use in motorcycle telescopic forks and shock absorbers. Its advanced formulation ensures optimal damping performance, minimises foam formation, and provides excellent wear and corrosion protection, even under demanding riding conditions. This 5-litre volume is ideal for workshops and frequent service applications. Product Features: Fully synthetic formulation for consistent damping behaviour Prevents foam formation and seal hardening High wear resistance and corrosion protection Suitable for telescopic forks and shock absorbers in motorcycles, mopeds, and other two-wheeled vehicles Viscosity at 40°C: 28.5mm²/s; at 100°C: 5.7mm²/s Viscosity index: 146 Pour point: -42°C; Flash point: 244°C Volume: 5 litres Application Information: Follow the manufacturer's specifications for fork oil replacement intervals and procedures Ensure components are clean and free from contaminants before refilling Dispose of used oil responsibly in accordance with local regulations

Read more less

Liqui Moly Foam Filter Oil Spray 1604 is a specialised aerosol designed for treating foam and fabric air filters in motorcycles and other small engines. It effectively traps dust and dirt, ensuring optimal airflow and engine performance even under extreme operating conditions. Product Features: Suitable for foam and fabric air filters Compatible with two-stroke and four-stroke engines Ensures optimal airflow and engine performance Protects against dust and dirt ingress Easy application via aerosol spray Volume: 400ml Application Information: Remove coarse contaminants from the filter by gently tapping. Clean the air filter using Liqui Moly Motorbike Foam Filter Cleaner. After the cleaner has evaporated, evenly apply the Foam Filter Oil Spray. Allow the filter to air out for 10 to 15 minutes before reinstallation. Ensure the application area is well-ventilated during use. This product is ideal for maintaining the efficiency and longevity of air filters in motorcycles, ensuring consistent engine protection and performance.

Read more less

Liqui Moly Chain Lube White is a fully synthetic, high-performance chain lubricant designed for motorcycles operating under demanding conditions. Its white-coloured formulation ensures visible application, facilitating even coverage and thorough lubrication. The lubricant offers exceptional adhesion, resisting fling-off even at high speeds, and provides robust protection against wear and corrosion. Suitable for all types of chains, including O-ring, X-ring, and standard chains, it maintains optimal performance across a wide temperature range. For best results, clean the chain with Liqui Moly Motorbike Chain and Brake Cleaner before application. Product Features Fully synthetic white chain lubricant for motorcycles Visible application ensures complete coverage Excellent adhesion properties minimize fling-off Provides superior wear and corrosion protection Effective across a temperature range from –30°C to +180°C Suitable for O-ring, X-ring, and standard chains Reduces chain elongation and extends service life Packaging: 50ml aerosol can; refillable from 400ml can Technical Specifications Base: Synthetic oil with additives Colour: White Form: Aerosol, liquid Operating temperature range: –30°C to +180°C Flash point: –60°C Water resistance at 90°C: Rating 0 (DIN 51 807) Odour: Characteristic Application Information Clean the motorcycle chain thoroughly using Liqui Moly Motorbike Chain and Brake Cleaner. Shake the aerosol can well before use. Spray the lubricant evenly onto the inner side of the clean, dry chain. Allow the solvent to evaporate completely to ensure optimal adhesion and performance. Regular application is recommended to maintain chain performance and longevity.

Read more less

Liqui Moly Chain Lube White is a fully synthetic, high-performance chain lubricant designed for motorcycles operating under demanding conditions. Its white-coloured formulation ensures visible application, facilitating even coverage and thorough lubrication. The lubricant offers exceptional adhesion, resisting fling-off even at high speeds, and provides robust protection against wear and corrosion. Suitable for all types of chains, including O-ring, X-ring, and standard chains, it maintains optimal performance across a wide temperature range. For best results, clean the chain with Liqui Moly Motorbike Chain and Brake Cleaner before application. Product Features Fully synthetic white chain lubricant for motorcycles Visible application ensures complete coverage Excellent adhesion properties minimize fling-off Provides superior wear and corrosion protection Effective across a temperature range from –30°C to +180°C Suitable for O-ring, X-ring, and standard chains Reduces chain elongation and extends service life Packaging: 400ml aerosol can Technical Specifications Base: Synthetic oil with additives Colour: White Form: Aerosol, liquid Operating temperature range: –30?°C to +180°C Flash point: –60°C Water resistance at 90°C: Rating 0 (DIN 51 807) Odour: Characteristic Application Information Clean the motorcycle chain thoroughly using Liqui Moly Motorbike Chain and Brake Cleaner. Shake the aerosol can well before use. Spray the lubricant evenly onto the inner side of the clean, dry chain. Allow the solvent to evaporate completely to ensure optimal adhesion and performance. Regular application is recommended to maintain chain performance and longevity.

Read more less