Hot Rods

Hot Rods OEM Stroke Crankshaft Assembly - 8-HR00047 This crankshaft assembly is a complete, factory-assembled unit featuring the trusted Hot Rods connecting rods, top-end bearings, and crankshaft webs. Trued to OEM specifications, it meets or exceeds OEM performance and durability standards. While the assembly is ready for installation and fully rebuildable, main bearings and seals are sold separately for single-cylinder crankshafts. Features: Includes Hot Rods connecting rods, top-end bearings, and crankshaft webs. Factory-assembled and trued to OEM specifications. Surpasses OEM performance and durability. Ready for installation. Fully rebuildable with genuine Hot Rods components. Main bearings and seals sold separately for single-cylinder crankshafts. Vehicle Fitments: Yamaha YFZ450R: 2014–2019 Part Number: 56-9011.HR

Read more less

Hot Rods Heavy-Duty Crankshaft Bottom End Kit - CBK0179 This heavy-duty crankshaft bottom end kit offers a choice between OE replacement crankshafts or stroker crankshafts by Hot Rods. Designed for a complete engine rebuild, the kit includes main bearings, seals, and a comprehensive gasket set to ensure reliable and long-lasting performance. Note: Water pump seal is not included. Features: Choice of Hot Rods Heavy Duty OE replacement or stroker crankshafts. Includes main bearings and seals kit. Comprehensive engine gasket set for complete rebuilds. Reliable, durable, and ready for installation. Specifications: Included items: (1) Crankshaft with connecting rod installed. (2) 30x76x19 bearings. (1) 35x45x6 seal. (1) 14x22x5 seal. (1) 12x21x4 seal. (2) 12x18x5 seals. (1) Gasket set. Vehicle Fitments: Yamaha YFZ450R: 2009–2013 Yamaha YFZ450RSE Special Edition: 2009–2013 Yamaha YFZ450X: 2010–2011 Yamaha YFZ450X SE: 2010–2011 Yamaha YFZ450XBB Bill Balance Edition: 2010 Vehicle Compatibility Please check the exact model and year before ordering. Manufacturer Model Years YAMAHA YFZ X 450 2010-2011 YAMAHA YFZ R 450 2009-2016

Read more less

Hot Rods OEM Stroke Crankshaft Assembly - 4406 This crankshaft assembly is a complete, factory-assembled unit featuring the proven Hot Rods connecting rods, top-end bearings, and crankshaft webs. It is trued to OEM specifications, meeting or exceeding OEM performance and durability standards. While the assembly is ready for installation and fully rebuildable, main bearings and seals are sold separately for single-cylinder crankshafts. Features: Includes Hot Rods connecting rods, top-end bearings, and crankshaft webs. Factory-assembled and trued to OEM specifications. Surpasses OEM performance and durability. Ready for installation. Fully rebuildable with genuine Hot Rods components. Main bearings and seals sold separately for single-cylinder crankshafts. Cross-Reference OEM Part Numbers: YAMAHA: 18P-11400-01-00 Vehicle Fitments: Yamaha YFZ450R: 2009–2013 Yamaha YFZ450RSE Special Edition: 2009–2013 Yamaha YFZ450X: 2010–2011 Yamaha YFZ450X SE: 2010–2011 Yamaha YFZ450XBB Bill Balance Edition: 2010 Part Number: 56-9010.HR Vehicle Compatibility Please check the exact model and year before ordering. Manufacturer Model Years YAMAHA YFZ X 450 2010-2011 YAMAHA YFZ R 450 2009-2016

Read more less

Hot Rods Heavy Duty Crankshaft Bottom End Kit - CBK0190 This heavy-duty OE replacement crankshaft kit includes everything necessary for crankshaft installation, ensuring a complete and reliable engine rebuild. The kit features Hot Rods main bearings, seals, and a comprehensive engine gasket set with all required gaskets and seals. Note: Water pump seal is not included. Features: Heavy-duty OE replacement crankshafts by Hot Rods. Includes main bearings and seals kit. Complete engine gasket set for a thorough rebuild. Designed for durability and performance. Vehicle Fitments: KTM 50 SX: 2013–2019 Husqvarna TC 50: 2017–2019 Vehicle Compatibility Please check the exact model and year before ordering. Manufacturer Model Years HUSQVARNA TC 50 2017-2019 KTM SX 50 2013-2019

Read more less

Hot Rods OEM Stroke Crankshaft Assembly - 4401 This crankshaft assembly is sold complete with Hot Rods connecting rods, top-end bearings, and crankshaft webs. Designed to meet or exceed OEM performance and durability, it is factory-assembled, trued to OEM specifications, and ready for immediate installation. The assembly is fully rebuildable with genuine Hot Rods components. Features: Includes original Hot Rods connecting rods, top-end bearings, and crankshaft webs. Factory-assembled and trued to OEM specifications. Surpasses OEM performance and durability. Complete and ready for installation. Fully rebuildable using Hot Rods connecting rods. Specifications: Included items: (1) Crankshaft with connecting rod installed. (1) Piston pin bearing. Cross-Reference OEM Part Numbers: KTM: 45230018000 Vehicle Fitments: KTM 50 SX: 2009–2018 KTM 50 SX Mini: 2014–2017 Husqvarna TC 50: 2017–2018 Part Number: 56-9009.HR Vehicle Compatibility Please check the exact model and year before ordering. Manufacturer Model Years HUSQVARNA TC 50 2017-2019 KTM SX 50 2013-2019 KTM SX 50 2009-2012

Read more less

A factory-assembled crankshaft assembly with Hot Rods connecting rods, trued to within 0.001 inches for precise operation. Designed for direct installation, it offers long-term reliability and is fully rebuildable for extended service life. Features Hot Rods connecting rod included Assembled and trued to within 0.001 inches Ready for direct installation Rebuildable with serviceable components for prolonged use Specifications Contents: (1) crankshaft with two connecting rods installed; (2) crankshaft bearings Cross-Reference OEM Part Numbers AT-09432 1204334 2202916 2203068 2205112 Vehicle Fitments Polaris Ranger 6x6 800 2010–2014 Polaris Ranger 800 Crew 2010–2011 Polaris Ranger 800 Crew EPS 2010–2011 Polaris Ranger 800 HD 2010 Polaris Ranger 800 HD EPS 2011 Polaris Ranger 800 XP 2010–2011 Polaris Ranger 800 XP EPS 2010–2011 Polaris Ranger MVRS 800 4x4 2008 Polaris Ranger RZR 800 2008–2013 Polaris Ranger RZR 800 EPS 2010–2013 Polaris Ranger RZR 800 S 2009–2013 Polaris Ranger RZR 800 SW Military 2011 Polaris Sportsman 800 EFI 2005–2014 Polaris Sportsman 800 EFI 6x6 Big Boss 2009–2011 Polaris Sportsman 800 EFI Deluxe 2007 Polaris Sportsman 800 EFI HO 2008–2010 Polaris Sportsman 800 EFI Touring 2008–2009 Polaris Sportsman 800 EFI X2 2007–2009 Polaris Sportsman 800 EFI X2 Deluxe 2007 Polaris Sportsman 800 HO EFI Military 2008 Vehicle Compatibility Please check the exact model and year before ordering. Manufacturer Model Years POLARIS SPORTSMAN EFI 800 2005-2014 POLARIS RANGER 800 2010-2016 POLARIS RZR 800 2008-2014 POLARIS SPORTSMAN 800 2005-2014 POLARIS RANGER 4X4 EFI 800 2008-2014

Read more less

Hot Rods OEM Stroke Crankshaft Assembly - 4089 Sold complete with the original proven Hot Rods connecting rods, top-end bearings, and crankshaft webs. Crankshafts for Yamaha Banshee are sold complete with main bearings. Factory assembled and trued to OEM specifications; meet or surpass OEM in performance and durability. Complete and ready for installation. Completely rebuildable with genuine Hot Rods connecting rods. Included Items: (1) Crankshaft (2) Connecting rods (2) Rod bearings (four halves) Cross Reference Numbers Only: KAWASAKI: 13031-0030 Compatible Models: Kawasaki: 2008 Kawasaki KRF750A Teryx 750 4x4 2008 Kawasaki KRF750B Teryx 750 4x4 Camo 2008 Kawasaki KRF750C Teryx 750 4x4 LE 2008 Kawasaki KRF750D Teryx 750 4x4 LE Camo 2008 Kawasaki KRF750F Teryx 750 4x4 NRA Outdoors 2009 Kawasaki KRF750G Teryx 750 FI 4x4 2009 Kawasaki KRF750J Teryx 750 FI 4x4 LE 2009 Kawasaki KRF750K Teryx 750 FI 4x4 LE Camo 2009 Kawasaki KRF750L Teryx FI 4x4 LE Sport 2009 Kawasaki KRF750L-A Teryx 750 FI 4x4 Sport Monster Energy 2009 Kawasaki KRF750M Teryx 750 FI 4x4 NRA Outdoors 2012 Kawasaki KRF750N Teryx FI 4x4 2011 Kawasaki KRF750N Teryx FI 4x4 2010 Kawasaki KRF750N Teryx FI 4x4 2012 Kawasaki KRF750P Teryx FI 4x4 LE 2011 Kawasaki KRF750P Teryx FI 4x4 LE 2010 Kawasaki KRF750P Teryx FI 4x4 LE 2012 Kawasaki KRF750R Teryx FI 4x4 LE Camo 2011 Kawasaki KRF750R Teryx FI 4x4 LE Camo 2010 Kawasaki KRF750R Teryx FI 4x4 LE Camo 2012 Kawasaki KRF750S Teryx FI 4x4 Sport 2011 Kawasaki KRF750S Teryx FI 4x4 Sport 2010 Kawasaki KRF750S Teryx FI 4x4 Sport 2011 Kawasaki KRF750T Teryx FI 4x4 Special Graphics Edition 2010 Kawasaki KRF750T Teryx FI 4x4 Special Graphics Edition 2012 Kawasaki KRF750V Teryx FI 4x4 Special Graphics Edition 2012 Kawasaki KRT750A Teryx4 4x4 2012 Kawasaki KRT750B Teryx4 4x4 EPS 2012 Kawasaki KRT750C Teryx4 750 4x4 EPS LE 2012 Kawasaki KRT750D Teryx4 4x4 EPS Camo Kawasaki KFX ATV Models: 2009 Kawasaki KSV700A KFX 2008 Kawasaki KSV700A KFX 2007 Kawasaki KSV700A KFX 2006 Kawasaki KSV700A KFX 2005 Kawasaki KSV700A KFX 2004 Kawasaki KSV700A KFX V Force 2009 Kawasaki KSV700B KFX 2008 Kawasaki KSV700B KFX 2007 Kawasaki KSV700B KFX 2006 Kawasaki KSV700B KFX IG 2005 Kawasaki KSV700B KFX IG 2004 Kawasaki KSV700B KFX V Force Limited 2006 Kawasaki KSV700C KFX Kawasaki Prairie ATV Models: 2006 Kawasaki KVF700A Prairie 4x4 2005 Kawasaki KVF700A Prairie 4x4 2004 Kawasaki KVF700A Prairie 4x4 2005 Kawasaki KVF700B Prairie 4x4 Camo 2004 Kawasaki KVF700B Prairie 4x4 Camo 2006 Kawasaki KVF700D Prairie 700 4x4 Team Green 2005 Kawasaki KVF700D Prairie 700 4x4 Team Green Kawasaki Brute Force ATV Models: 2008 Kawasaki KVF750A Brute Force 4x4i 2007 Kawasaki KVF750A Brute Force 4x4i 2006 Kawasaki KVF750A Brute Force 4x4i 2005 Kawasaki KVF750A Brute Force 4x4i 2007 Kawasaki KVF750B Brute Force 4x4i Camo 2006 Kawasaki KVF750B Brute Force 4x4i Camo 2005 Kawasaki KVF750B Brute Force 4x4i Camo 2007 Kawasaki KVF750B-A Brute Force 4x4i NRA 2007 Kawasaki KVF750C Brute Force 4x4i 2006 Kawasaki KVF750C Brute Force 4x4i 2011 Kawasaki KVF750D Brute Force 4x4i 2010 Kawasaki KVF750D Brute Force 4x4i 2009 Kawasaki KVF750D Brute Force 4x4i 2008 Kawasaki KVF750D Brute Force 4x4i 2007 Kawasaki KVF750D Brute Force 4x4i NRA 2010 Kawasaki KVF750E Brute Force 4x4i Camo 2009 Kawasaki KVF750E Brute Force 4x4i Camo 2008 Kawasaki KVF750E Brute Force 4x4i Camo 2009 Kawasaki KVF750E-A Brute Force 4x4i NRA Outdoors 2008 Kawasaki KVF750E-A Brute Force 4x4i NRA Outdoors 2010 Kawasaki KVF750F Brute Force 4x4i Nocturne Blue 2008 Kawasaki KVF750F Brute Force 4x4i Nocturne Blue 2011 Kawasaki KVF750F Brute Force 4x4i Ruby Red Suzuki: 2005 Suzuki LT-V700F Twinpeaks Quad Runner 4x4 2004 Suzuki LT-V700F Twinpeaks Quad Runner 4x4 Vehicle Compatibility Please check the exact model and year before ordering. Manufacturer Model Years KAWASAKI TERYX 750 2008-2012 KAWASAKI KFX 700 2004-2009 SUZUKI LT V TWIN PEAKS F 700 2004-2005 KAWASAKI KVF PRAIRIE 700 2004-2006 KAWASAKI KVF BRUTE FORCE 750 2005-2011

Read more less

Crankshaft assembly for Kawasaki KLX450R models from 2008 to 2009, engineered to meet or surpass OEM specifications. This factory-assembled unit is ready for installation, offering reliable performance and rebuildable capability. Ideal for riders seeking high-quality replacement components for their dirt bike. Features: Dirt bike assembly includes a Hot Rods connecting rod (main bearings not included). Factory-assembled and trued for precision and reliability. Designed to meet or exceed OEM specifications. Ready for installation, providing hours of dependable service. Fully rebuildable for long-term use. Included Items: Crankshaft with connecting rod pre-installed. Cross-Reference OEM Part Numbers: Kawasaki: 13031-0086 Kawasaki: 13037-0110 Kawasaki: 13037-0111 Part Number: Hot Rods 4018 Vehicle Compatibility Please check the exact model and year before ordering. Manufacturer Model Years KAWASAKI KLX R 450 2008-2009

Read more less

High-quality replacement connecting rod kit designed for Honda TRX500 Foreman models, providing superior strength and reliability. Manufactured from hot-rolled ASTM 4115 material and case-hardened to 58-62 RC for maximum durability. The advanced design incorporates strategically placed side scalloping and vent slots in the big end to minimize bearing race distortion at high RPMs. The rod is shot-peened to eliminate surface stress risers and double-honed to create an ultra-round bearing surface for enhanced reliability. Small ends are double-drilled to improve lubrication and cooling of the wrist pin bearing, critical under high-performance conditions. The kit is sold complete with all necessary components for assembly, including a rod, crank pin, crank pin bearing, top-end bearing, and silver-coated bronze phosphor thrust washers. Features: Constructed from ASTM 4115 material and case-hardened to 58-62 RC. Side scalloping and vent slots minimize distortion at high RPM. Shot-peened finish eliminates surface stress risers. Double-honed for an ultra-round bearing surface and high reliability. Double-drilled small ends improve lubrication and cooling for wrist pin bearings. Includes all components for a complete rod assembly. Included Items: (1) Connecting rod (1) Crank pin (1) Roller bearing (2) Thrust washers Vehicle Compatibility: 2005-2011 Honda TRX500FE Fourtrax Foreman ES 4x4 2005-2008 Honda TRX500FM Fourtrax Foreman 4x4 2005-2006 Honda TRX500TM Fourtrax Foreman Part Number: 56-8971.HR Vehicle Compatibility Please check the exact model and year before ordering. Manufacturer Model Years HONDA TRX TM 500 2005-2006 HONDA TRX FE 500 2005-2011 HONDA TRX FM FOREMAN 500 2005-2011 HONDA TRX FM 500 2005-2008 HONDA TRX FE FOURTRAX 500 2005-2011 HONDA SXS 500 2015-2019

Read more less

High-quality replacement connecting rod kit designed for Kawasaki KX125 models from 1979 to 1993, ensuring reliable performance and durability. Made from hot-rolled ASTM 4115 material and case-hardened to 58-62 Rc for strength and longevity. Advanced design features such as side scalloping and vent slots reduce high RPM bearing race distortion, while double-forged construction enhances dimensional consistency. Shot-peening and double-honing strengthen the rod under heavy loads. Small ends are double-drilled to improve lubrication and cooling, critical for wrist pin bearing performance. Thrust washers and crank pin bearings are silver-coated for enhanced lubricity. The kit includes a rod, crank pin, crank pin bearing, top-end bearing, and thrust washers. Features: Manufactured from ASTM 4115 material, case-hardened to 58-62 Rc. Side scalloping and vent slots reduce high RPM bearing race distortion. Double-forged construction for improved grain flow and dimensional consistency. Shot-peened and double-honed for superior strength under load. Double-drilled small ends enhance lubrication and cooling. Silver-coated thrust washers and crank pin bearings for added lubricity. Complete kit includes rod, crank pin, crank pin bearing, top-end bearing, and thrust washers. Specifications: Center-to-Center Length: 106.00 mm Pin Diameter: 22.00 mm Pin Length: 50.90 mm Big End Bore: 29.00 mm Small End Bore: 21.00 mm Washer Thickness: 1.00 mm Cross-Reference OEM Part Numbers: 13032-1179 13032-1200 13044-5008 13044-5009 13044-5017 13044-5018 13044-5030 13044-5035 13044-5047 13044-5065 Vehicle Compatibility: 1979-1993 Kawasaki KX125 Additional models: 1988 Kawasaki KDX200 1987 Kawasaki KDX200 1986 Kawasaki KDX200 Part Number: 56-896.HR Vehicle Compatibility Please check the exact model and year before ordering. Manufacturer Model Years KAWASAKI KX 125 1992-1993 KAWASAKI KDX 200 1986-1988 KAWASAKI KX 125 1978-1981 KAWASAKI KX 125 1982-1987 KAWASAKI KX 125 1978-1987 KAWASAKI KX 125 1979-1987

Read more less

High-quality replacement connecting rod kit designed for performance and durability. Manufactured from hot-rolled ASTM 4115 material and case-hardened to 58-62 Rc, ensuring strength and reliability under demanding conditions. Features advanced design elements like strategically located side scalloping and vent slots to reduce high RPM bearing race distortion. Double-forged construction improves grain flow and dimensional consistency, while shot-peening and double-honing enhance strength under heavy loads. Small ends are double-drilled to improve lubrication and cooling, particularly important for wrist pin bearings under high-stress applications. Thrust washers and crank pin bearings are silver-coated for added lubricity. Each kit is supplied complete with a rod, crank pin, crank pin bearing, top-end bearing, and thrust washers. Features: High-strength ASTM 4115 material, case-hardened to 58-62 Rc. Side scalloping and vent slots minimize distortion at high RPM. Double-forged for improved grain flow and dimensional consistency. Shot-peened and double-honed for superior strength under load. Double-drilled small ends enhance lubrication and cooling. Silver-coated thrust washers and crank pin bearings for added lubricity. Complete kit includes rod, crank pin, crank pin bearing, top-end bearing, and thrust washers. Specifications: Center-to-Center Length: 132 mm Pin Diameter: 24.00 mm Pin Length: 59.90 mm Big End Bearing: 24x31x17 mm Big End Bore: 31.00 mm Big End Width: 16.90 mm Small End Bearing: 18x22x20 mm Cross-Reference OEM Part Numbers: 54630015044 Vehicle Compatibility: 1990-1999 KTM 250 EXC 1990-1999 KTM 250 SX 1990-1999 KTM 250 XC 1990-1999 KTM 250 XC-W 1990-2003 KTM 300 EXC 1990-2003 KTM 300 MXC 1990-2003 KTM 300 XC 1990-2003 KTM 300 XC-W Part Number: 56-894.HR Vehicle Compatibility Please check the exact model and year before ordering. Manufacturer Model Years KTM SX 300 1990-2003 KTM EXC 300 1990-2003 KTM XC 250 1990-1999 KTM SX 250 1990-1999 KTM EXC 250 1990-1999 KTM XCR W 250 1990-1999 KTM XCF W 250 1990-1999 KTM XCF 250 1990-1999 KTM XC WE 250 1990-1999 KTM XC W E 250 1990-1999 KTM XC W 250 1990-1999 KTM XC W 300 1990-1999 KTM XC FW 250 1990-1999 KTM XC F 250 1990-1999 KTM XC F 300 1990-1999 KTM XC 300 1990-1999 KTM SXS 250 1990-1999 KTM SX 300 1990-1999 KTM MXC 250 1990-1999 KTM MXC 300 1990-1999 KTM MX 250 1990-1999 KTM MX 300 1990-1999 KTM GS 250 1990-1999 KTM GS 300 1990-1999 KTM FREERIDE 250 1990-1999 KTM EXC R 250 1990-1999 KTM EXC G 250 1990-1999 KTM EXC F 250 1990-1999 KTM EXC E 300 1990-1999 KTM EXC 300 1990-1999 KTM EGS 250 1990-1999 KTM EGS 300 1990-1999 KTM CROSS 250 1990-1999

Read more less

HONDA CR 125R 1981 - 1984,SUZUKIRM 125 1984 - 1986, Connecting rod rebuild Kit. 8162 SIZE MM Centre 2 Centre 100 Small End Bearing 14x18x15.80 Small End Bore Ø 18 Small End Width 16.00 Big End Bearing 22x28x15.7 Big End Bore Ø 28 Big End Width 16.00 Big End Pin Ø 22 Big End Pin Length 52.90 Washer Thickness 1.00 Part No. 56-892_HR (radhouse.co.uk) Cross Reference Numbers Only:SUZUKI: 12161-01B00 SUZUKI: 12161-14500 HONDA: 13200-KA3-740 HONDA: 13201-466-300 HONDA: 13201-KA3-700 HONDA: 13201-KA3-710 HONDA: 13201-KA3-740 Vehicle Compatibility Please check the exact model and year before ordering. Manufacturer Model Years SUZUKI RM 125 1984-1986 HONDA CR 125 1981-1984

Read more less

High-performance Hot Rods connecting rod kit designed for Honda XR400 models. Built to deliver durability and reliability, this kit meets or exceeds OEM specifications, making it a dependable choice for heavy-duty performance and long-term use. Features: Constructed from hot-rolled ASTM 4115 and case-hardened to 58-62 Rc for exceptional strength. Advanced design with side scalloping and vent slots to reduce high RPM bearing race distortion. Double-forged rods enhance grain flow and ensure dimensional consistency. Shot-peened and double-honed for superior durability under heavy loads. Double-drilled small ends improve lubrication and cooling of the wrist pin bearing. Silver-coated thrust washers and crank pin bearings for enhanced lubricity. Kit includes rod, crank pin, crank pin bearing, top-end bearing, and thrust washers. Specifications: Big End Bore: 43.00 mm Big End Width: Not specified Center to Center: 122.60 mm Pin Diameter: 34.00 mm Pin Length: 65.90 mm Small End Bore: 20.00 mm Cross-Reference OEM Part Numbers: HONDA: 13000-KCY-670, 13000-KCY-671, 13000-KCY-672 56-890_HR Compatibility: Honda XR400: 1996–2006 Part Number: 8124 Vehicle Compatibility Please check the exact model and year before ordering. Manufacturer Model Years HONDA XR 400 1996-2004 HONDA XR R 400 1996-2004 HUSABERG FC 450 2009-2012 HONDA XR 400 1996-2005

Read more less

High-quality Hot Rods connecting rod kit designed for Honda CR80 and CR85 models. This kit offers exceptional strength, durability, and precision, making it a reliable replacement for OEM components and ensuring optimal performance under demanding conditions. Features: Manufactured from hot-rolled ASTM 4115 and case-hardened to 58-62 Rc for maximum durability. Side scalloping and vent slots minimize high RPM bearing race distortion. Double-forged rods improve grain flow and dimensional consistency. Shot-peened and double-honed for enhanced strength under heavy loads. Double-drilled small ends provide extra lubrication and cooling for the wrist pin bearing. Silver-coated thrust washers and crank pin bearings for increased lubricity. Complete kit includes rod, crank pin, crank pin bearing, top-end bearing, and thrust washers. Cross-Reference OEM Part Numbers: HONDA: 13200-GBF-B40, 13200-GC4-600, 13201-GC4-600 HOT RODS: 8125 Compatibility: Honda CR80R: 1985–2002 Honda CR85R: 2003–2007 Part Number: 8125 Vehicle Compatibility Please check the exact model and year before ordering. Manufacturer Model Years HONDA CR 85 2003-2007 HONDA CR 80 1986-2002 HONDA CR 80 1985-2007 HONDA CR 85 1985-2007 HONDA CR 80 1986-2007 HONDA CR 85 1986-2007

Read more less

High-performance Hot Rods connecting rod kit designed as a reliable replacement for Kawasaki KX125 models. Engineered for durability and precision, the kit is crafted from premium materials to ensure long-lasting performance under demanding conditions. Features: Manufactured from hot-rolled ASTM 4115 and case-hardened to 58-62 Rc for exceptional strength. Strategically designed side scalloping and vent slots reduce high RPM bearing race distortion. Double-forged rods improve grain flow and dimensional consistency. Shot-peened and double-honed for superior durability under heavy loads. Small ends feature double drilling to enhance lubrication and cooling of the wrist pin bearing. Thrust washers and crank pin bearings are silver-coated for increased lubricity. Kit includes rod, crank pin, crank pin bearing, top-end bearing, and thrust washers. Specifications: Big End Bore: 29.00 mm Big End Width: Not specified Center to Center: 106.00 mm Pin Diameter: 22.00 mm Pin Length: 50.90 mm Small End Bore: 19.00 mm Small End Width: Not specified Washer Thickness: 1.00 mm Cross-Reference OEM Part Numbers: 13032-1196, 13032-1219, 56-886.WI, MX-09030, WISECO WPR132, HOT RODS 8163 Compatibility: 1997 Kawasaki KX125 1996 Kawasaki KX125 1995 Kawasaki KX125 1994 Kawasaki KX125 Part Number: 8163 Vehicle Compatibility Please check the exact model and year before ordering. Manufacturer Model Years KAWASAKI KX 125 1994-1997

Read more less

High-quality Hot Rods connecting rod kit designed as a replacement for Suzuki RM125 models (1997–1998). Manufactured from hot-rolled ASTM 4115 steel and case-hardened to 58-62 Rc, this kit delivers outstanding durability and performance under high-stress conditions. Features: Constructed from hot-rolled ASTM 4115 steel and case-hardened to 58-62 Rc for enhanced strength. Strategically located side scalloping and vent slots reduce high-rpm bearing race distortion. Double-forged rods improve grain flow and maintain dimensional consistency. Shot-peened and double-honed for superior durability under heavy loads. Double-drilled small ends improve lubrication and cooling of the wrist pin bearing, critical for close piston crown proximity. Silver-coated thrust washers and crank pin bearings enhance lubricity and reduce friction. Complete kit includes rod, crank pin, crank pin bearing, top-end bearing, and thrust washers. Cross-Reference OEM Part Numbers: Suzuki: 12161-43D00 Technical Specifications: Big End Bore (mm): 28.00 Big End Width (mm): Not specified Center-to-Center (mm): 100.00 Pin Diameter (mm): 22.00 Pin Length (mm): 52.90 Small End Bore (mm): 19.00 Small End Width (mm): Not specified Washer Thickness (mm): 1.60 Vehicle Compatibility: Suzuki RM125: 1997–1998 Part Number: 56-882.HR Vehicle Compatibility Please check the exact model and year before ordering. Manufacturer Model Years SUZUKI RM 125 1997-1998

Read more less

High-quality Hot Rods connecting rod kit designed as a replacement for Suzuki RM250 models (1996–2002). Manufactured from hot-rolled ASTM 4115 steel and case-hardened to 58-62 Rc, this kit provides exceptional strength and performance under demanding conditions. Features: Constructed from hot-rolled ASTM 4115 steel and case-hardened to 58-62 Rc for durability. Strategically located side scalloping and vent slots minimize high-rpm bearing race distortion. Double-forged rods enhance grain flow and maintain dimensional consistency. Shot-peened and double-honed for superior strength under heavy loads. Double-drilled small ends improve lubrication and cooling of the wrist pin bearing, crucial for close piston crown proximity. Silver-coated thrust washers and crank pin bearings enhance lubricity and reduce friction. Complete kit includes rod, crank pin, crank pin bearing, top-end bearing, and thrust washers. Cross-Reference OEM Part Numbers: MX-09054 12161-37E00 WPR161 Hot Rods 8141 Wossner P2026 Technical Specifications: Big End Bearing (mm): 24 x 32 x 19.7 Big End Bore (mm): 32.00 Big End Width (mm): Not specified Center-to-Center (mm): 125.50 Pin Diameter (mm): 24.00 Pin Length (mm): 57.90 Small End Bearing (mm): Not specified Small End Bore (mm): 23.00 Small End Width (mm): Not specified Washer Thickness (mm): 1.50 Vehicle Compatibility: Suzuki RM250: 1996–2002 Part Number: 56-879.HR Vehicle Compatibility Please check the exact model and year before ordering. Manufacturer Model Years SUZUKI RM 250 1996-2002

Read more less

High-quality connecting rod kit designed as a durable replacement for Kawasaki and Suzuki models. Built with precision and engineered to minimize high-rpm bearing race distortion, this kit delivers reliable performance under demanding conditions. Features: Manufactured from hot-rolled ASTM 4115 steel and case-hardened to 58-62 Rc for enhanced strength and durability. Advanced design includes side scalloping and vent slots to minimize high-rpm bearing race distortion. Double-forged construction improves grain flow and ensures dimensional consistency. Shot-peened and double-honed rods provide superior strength under heavy loads. Double-drilled small ends optimize lubrication and cooling of the wrist pin bearing. Silver-coated thrust washers and crank pin bearings enhance lubricity and reduce friction. Complete kit includes rod, crank pin, crank pin bearing, top-end bearing, and thrust washers. Technical Specifications: Big End Bearing (mm): 22x28x14 Big End Bore (mm): 28.00 Big End Width (mm): 13.98 Center to Center (mm): 92.00 Pin Diameter (mm): 22.00 Cross-Reference OEM Part Numbers: KAWASAKI: 13032-1230 SUZUKI: K1303-21230 HotRod: 8147 Vehicle Compatibility: Kawasaki: 1998–2000 Kawasaki KX80 2001–2018 Kawasaki KX85 1998–2018 Kawasaki KX100 2009 Kawasaki KX85 Monster Energy 2009 Kawasaki KX100 Monster Energy Suzuki: 2003 Suzuki RM100 Part Number: 56-878.HR Vehicle Compatibility Please check the exact model and year before ordering. Manufacturer Model Years SUZUKI RM 100 2003 KAWASAKI KX 80 1998-2000 KAWASAKI KX 85 2001-2021 KAWASAKI KX 100 1998-2019 KAWASAKI KX 100 1998-2021 KAWASAKI KX 85 2001-2020 KAWASAKI KX 100 1998-2020 KAWASAKI KX 100 1998-2000 KAWASAKI KX 85 2001-2015 KAWASAKI KX 100 2001-2015 KAWASAKI KX 80 1998-2016 KAWASAKI KX 85 2001-2017 KAWASAKI KX 85 1998-2016 KAWASAKI KX 100 1998-2016 KAWASAKI KX 100 1998-2017

Read more less

Heavy-duty connecting rod kit designed for the Kawasaki KX125, offering a durable and high-performance solution for demanding applications. Manufactured to stringent standards, this kit provides excellent reliability and strength while minimizing high-rpm bearing race distortion. Features: Made from hot-rolled ASTM 4115 steel and case-hardened to 58-62 Rc for exceptional durability. Advanced design incorporates strategically located side scalloping and vent slots to reduce high-rpm bearing race distortion. Double-forged rods ensure improved grain flow and dimensional consistency. Shot-peened and double-honed construction provides superior strength under heavy loads. Double-drilled small ends enhance lubrication and cooling of the wrist pin bearing. Silver-coated thrust washers and crank pin bearings increase lubricity and longevity. Complete kit includes rod, crank pin, crank pin bearing, top-end bearing, and thrust washers. Technical Specifications: Big End Bore (mm): 29.00 Big End Width (mm): Not specified Center to Center (mm): 104.00 Pin Diameter (mm): 22.00 Pin Length (mm): 51.00 Small End Bore (mm): 19.00 Small End Width (mm): Not specified Washer Thickness (mm): 1.00 Cross-Reference OEM Part Numbers: KAWASAKI: 13032-0010, 13032-1225, 13032-1253 Vehicle Compatibility: 1998 Kawasaki KX125 1999 Kawasaki KX125 2000 Kawasaki KX125 2001 Kawasaki KX125 2002 Kawasaki KX125 Part Number: 56-877.HR Vehicle Compatibility Please check the exact model and year before ordering. Manufacturer Model Years KAWASAKI KX 125 1998-2002 KAWASAKI KX 125 1988-2002

Read more less

Heavy-duty connecting rod kit designed as a high-quality replacement for the Suzuki RM-Z250. Built for durability and high performance, this kit is engineered to withstand the demands of high-rpm applications while ensuring long-lasting reliability. Features: Manufactured from hot-rolled ASTM 4115 steel and case-hardened to 58-62 Rc for exceptional strength. Advanced design includes side scalloping and vent slots to minimize high-rpm bearing race distortion. Double-forged construction enhances grain flow and ensures dimensional accuracy. Shot-peened and double-honed rods provide superior strength under heavy loads. Double-drilled small ends deliver improved lubrication and cooling of the wrist pin bearing. Silver-coated thrust washers and crank pin bearings enhance lubricity and durability. Complete kit includes rod, crank pin, crank pin bearing, top-end bearing, and thrust washers. Technical Specifications: Big End Bearing (mm): 30x38x17.7 Big End Bore (mm): 38.00 Big End Width (mm): 17.75 Center to Center (mm): 92.50 Pin Diameter (mm): 30.00 Pin Length (mm): 54.85 Small End Bearing (mm): Bushing Small End Bore (mm): 16.00 Small End Width (mm): 15.00 Washer Thickness (mm): Not used Cross-Reference OEM Part Numbers: SUZUKI: 12161-10H10-0B0, 12161-49H00-0B0 Vehicle Compatibility: 2007-2015 Suzuki RM-Z250 Part Number: 56-876.HR Vehicle Compatibility Please check the exact model and year before ordering. Manufacturer Model Years SUZUKI RM Z 250 2007-2016 SUZUKI RM Z 250 2007-2015

Read more less

Heavy-duty connecting rod kit designed as a high-quality replacement for the Suzuki RM-Z450. Manufactured for exceptional durability and performance, this kit ensures reliability under demanding conditions. Its advanced engineering minimizes high-rpm bearing race distortion and improves overall operational longevity. Features: Manufactured from hot-rolled ASTM 4115 steel and case-hardened to 58-62 Rc for superior strength. Strategically designed side scalloping and vent slots reduce high-rpm bearing race distortion. Double-forged rods improve grain flow and maintain dimensional consistency. Shot-peened and double-honed for enhanced strength under heavy loads. Double-drilled small ends ensure additional lubrication and cooling of the wrist pin bearing. Silver-coated thrust washers and crank pin bearings improve lubricity. Complete kit includes rod, crank pin, crank pin bearing, top-end bearing, and thrust washers. Technical Specifications: Big End Bearing (mm): 34x42x19.7 Big End Bore (mm): 42.00 Big End Width (mm): 19.75 Center to Center (mm): 105.60 Pin Diameter (mm): 34.00 Pin Length (mm): 60.80 Small End Bearing (mm): No Bushing Small End Bore (mm): 19.00 Small End Width (mm): 16.50 Washer Thickness (mm): Not Applicable Cross-Reference OEM Part Numbers: SUZUKI: 12160-28H00-0B0 Vehicle Compatibility: 2008 Suzuki RM-Z450 2009 Suzuki RM-Z450 2010 Suzuki RM-Z450 2011 Suzuki RM-Z450 2012 Suzuki RM-Z450 2013 Suzuki RM-Z450 2014 Suzuki RM-Z450 Part Number: 56-874.HR Vehicle Compatibility Please check the exact model and year before ordering. Manufacturer Model Years SUZUKI RMX Z 450 2010-2019 SUZUKI RM Z 450 2008-2012

Read more less

Heavy-duty connecting rod kit designed as a high-quality replacement for the Yamaha YZ250F. Manufactured from premium materials and engineered for superior strength and performance, this kit ensures durability under demanding conditions. The advanced design minimizes high-rpm bearing race distortion, and precise construction delivers reliable operation. Features: Complete kit includes rod, crank pin, crank pin bearing, top-end bearing, and thrust washers. Made from hot-rolled ASTM 4115 steel and case-hardened to 58-62 Rc for exceptional durability. Side scalloping and vent slots reduce high-rpm bearing race distortion. Double-forged construction improves grain flow and ensures dimensional consistency. Shot-peened and double-honed rods offer superior strength under heavy loads. Double-drilled small ends enhance lubrication and cooling of the wrist pin bearing. Silver-coated thrust washers and crank pin bearings for improved lubricity. Technical Specifications: Big End Bearing (mm): 30x38x17.8 Big End Bore (mm): 38.00 Big End Width (mm): 17.97 Center to Center (mm): 93.50 Pin Diameter (mm): 30.00 Pin Length (mm): 54.80 Small End Bearing (mm): Bushing Small End Bore (mm): 16.00 Small End Width (mm): 14.95 Cross-Reference OEM Part Numbers: YAMAHA: 5NL-11651-00-00, 5NL-11651-10-00 Vehicle Compatibility: 2001 Yamaha YZ250F 2002 Yamaha YZ250F Part Number: 56-873.HR Vehicle Compatibility Please check the exact model and year before ordering. Manufacturer Model Years YAMAHA YZ F 250 2001-2002 YAMAHA YZF 250 2001-2002 YAMAHA WRF 250 2001-2002 YAMAHA WR F 250 2001-2002

Read more less

Heavy-duty connecting rod kit designed as a direct OE replacement, offering superior strength and durability. Constructed from certified 8620 AISI steel, this kit provides reliable performance for high-rpm applications. Advanced design minimizes bearing race distortion and ensures long-lasting functionality. Fully compatible with Hot Rods and OE crankshafts. Features: Manufactured from certified 8620 AISI steel for exceptional strength and durability. Big end design features strategically located side scalloping and vent slots to reduce high-rpm bearing race distortion. Crankpins made from hot-rolled ASTM 4115, case-hardened to 58-62 Rc. Latest caged needle roller bearing designs for enhanced longevity at high rpm. Thrust washers made from bronze phosphor and silver-coated for improved lubricity. Complete rod assembly includes connecting rod, crankpin, crankpin bearing, needle bearings, top-end bearing, and thrust washers. Made in the U.S.A. Technical Specifications: Big End Bore (mm): 22.00 Big End Width (mm): Not specified Center to Center (mm): 85.00 Pin Diameter (mm): 16.00 Pin Length (mm): 36.00 Small End Bore (mm): 15.00 Small End Width (mm): Not specified Washer Thickness (mm): 0.85 Vehicle Compatibility: KTM: 2018 KTM 50 SX 2017 KTM 50 SX 2016 KTM 50 SX 2015 KTM 50 SX 2014 KTM 50 SX 2013 KTM 50 SX 2012 KTM 50 SX 2011 KTM 50 SX 2010 KTM 50 SX 2009 KTM 50 SX 2017 KTM 50 SX Mini 2016 KTM 50 SX Mini 2015 KTM 50 SX Mini 2014 KTM 50 SX Mini 2006–2008 KTM 50 SX Pro Jr 2004–2005 KTM 50 SX Pro Junior LC 2004–2005 KTM 50 SX Pro Sr Husqvarna: 2018 Husqvarna TC50 2017 Husqvarna TC50 Part Number: 8135 Vehicle Compatibility Please check the exact model and year before ordering. Manufacturer Model Years HUSQVARNA TC 50 2017-2020 HUSQVARNA TC 50 2017-2021 GAS-GAS MC 50 2021 KTM SX 50 2001-2021 KTM SX 50 2001-2015 KTM SX 50 2001-2019 KTM SX 50 2001-2020

Read more less

High-quality connecting rod kit designed to meet or exceed OEM standards for durability and performance. Manufactured from hot-rolled ASTM 4115 steel and case-hardened to 58-62 Rc, this kit ensures exceptional strength and reliability under demanding conditions. Advanced design features minimize high-rpm bearing race distortion, while precise manufacturing enhances overall performance and longevity. Features: Manufactured from hot-rolled ASTM 4115 steel, case-hardened to 58-62 Rc. Strategically located side scalloping and vent slots reduce high-rpm bearing race distortion. Double-forged construction improves grain flow and maintains dimensional consistency. Shot-peened and double-honed rods provide superior strength under heavy loads. Double-drilled small ends for enhanced lubrication and cooling of the wrist pin bearing. Silver-coated thrust washers and crank pin bearings for improved lubricity. Complete kit includes rod, crank pin, crank pin bearing, top-end bearing, and thrust washers. Technical Specifications: Big End Bearing (mm): KU 35x42x19.8 Big End Bore (mm): 42.00 Big End Width (mm): 19.90 Center to Center (mm): 120.00 Pin Diameter (mm): 35.00 Pin Length (mm): 62.80 Small End Bearing (mm): Bushing Small End Bore (mm): 19.00 Cross-Reference OEM Part Numbers: 78630015144, WOSSNER P4047, HOTROD 8692 Vehicle Compatibility: 2011 KTM 530 EXC 2010 KTM 530 EXC 2009 KTM 530 EXC 2011 KTM 530 XC-W Six Days Part Number: 56-868.HR Vehicle Compatibility Please check the exact model and year before ordering. Manufacturer Model Years KTM EXC 530 2009-2011 KTM EXC R 530 2008-2011 KTM EXC 530 2008-2011 KTM XC W 530 2011

Read more less